LY/T 1033: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| LY/T 1033-2013 | English | 719 |
Add to Cart
|
3 days [Need to translate]
|
Steel vessel equipment for wood-based panel glue
| Obsolete |
LY/T 1033-2013
|
| LY/T 1033-1991 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
(Wood-based panels welded steel container glue device parameters)
| Obsolete |
LY/T 1033-1991
|
PDF similar to LY/T 1033-2013
Basic data | Standard ID | LY/T 1033-2013 (LY/T1033-2013) | | Description (Translated English) | Steel vessel equipment for wood-based panel glue | | Sector / Industry | Forestry Industry Standard (Recommended) | | Classification of Chinese Standard | B97 | | Classification of International Standard | 79.120 | | Word Count Estimation | 18,194 | | Older Standard (superseded by this standard) | LY/T 1033-1991; LY/T 1034-1991 | | Quoted Standard | GB 150.1; GB 150.2; GB 150.3; GB 150.4; GB 713; GB 912; GB/T 983; GB/T 985.1; GB/T 985.2; GB/T 985.4; GB/T 1184; GB/T 1804; GB/T 3280; GB/T 4237; GB/T 5117; GB/T 5118; GB/T 5293; GB/T 8163; GB/T 13296; GB/T 13306; GB/T 14975; GB/T 14976; GB/T 17854; GB/T | | Regulation (derived from) | State Forestry Bulletin 2013 No. 8; industry standard filing Notice No. 5 of 2013 (No. 161 overall) | | Issuing agency(ies) | State Forestry Administration | | Summary | This standard specifies: wood glue welded steel container equipment the basic parameters, requirements, testing, inspection rules, marking, packaging, transport and storage content. This standard applies to: the design internal pressure of less than or eq | LY/T 1033-2013: Steel vessel equipment for wood-based panel glue---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Steel vessel equipment for wood-based panel glue
ICS 79.120
B97
People's Republic of China forestry industry standards
Replacing LY/T 1033-1991, LY/T 1034-1991
Panel made of plastic steel welding container equipment
2013-03-15 released
2013-07-01 Implementation
State Forestry Administration released
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces LY/T 1033-1991 "Panel Gluing equipment steel welding vessel parameters", LY/T 1034-1991 "Panel System
Plastic equipment steel welding container technical conditions. " This standard is the amendment of LY/T 1033-1991, LY/T 1034-1991. This standard
The main differences compared to LY/T 1033-1991, LY/T 1034-1991 are as follows.
--- Modify the name;
--- Modify the scope;
--- Modify the mixing shaft, stirrer and some other technical requirements;
--- Increasing the mixing vessel stirring device components and technical requirements.
Please note that some of this document may be patentable. The issuing agencies of this document do not bear the responsibility of identifying these patents.
This standard by the National Panel Machinery Standardization Technical Committee (SAC/TC66) and focal point.
This standard was drafted. Northeast Forestry University, Guilin Huade Machinery Co., Ltd..
The main drafters of this standard. Qi Yingjie, Meng Ling United, Yu Yuhua, Zhao Zhongsheng, Lu is trouble, Yu Sihua.
This standard replaces the standards previously issued as follows.
--- LY/T 1033-1991;
--- LY/T 1034-1991.
Panel made of plastic steel welding container equipment
1 Scope
This standard specifies the basic parameters, requirements, testing, inspection rules, signs, packaging, transportation and
Storage and other content.
This standard applies to the design of the internal pressure is less than or equal to 0.3MPa, vacuum less than or equal to 0.1MPa plywood made of steel welding
Container equipment (hereinafter referred to as "container equipment").
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB 150.1 Pressure vessels - Part 1. General requirements
GB 150.2 Pressure vessels - Part 2. Materials
GB 150.3 Pressure vessels - Part 3. Design
GB 150.4 Pressure vessels - Part 4. Manufacturing, inspection and acceptance
GB 713 boiler and pressure vessel steel
GB 912 carbon structural steel and low alloy structural steel hot rolled steel sheet and strip
GB/T 983 stainless steel electrode
GB/T 985.1 gas welding, welding arc welding, gas shielded welding and high-beam welding recommended groove
GB/T 985.2 SAW recommended groove
GB/T 985.4 composite steel recommended groove
GB/T 1184 shape and location tolerances are not tolerance values
GB/T 1804 General tolerances Tolerances for linear and angular dimensions without tolerances
GB/T 3280 stainless steel cold-rolled steel sheet and strip
GB/T 4237 stainless steel hot-rolled steel sheet and strip
GB/T 5117 non-alloy steel and fine grain steel electrode
GB/T 5118 hot-rolled steel electrode
GB/T 5293 submerged arc welding carbon steel wire and flux
GB/T 8163 seamless steel pipe for conveying fluid
GB/T 13296 Boiler, heat exchanger with stainless steel seamless pipe
GB/T 13306 signs
GB/T 14975 stainless steel seamless pipe structure
GB/T 14976 stainless steel seamless pipe for fluid transport
GB/T 17854 SAW stainless steel wire and flux
GB/T 25198 pressure vessel head
NB/T 47014 Pressure Equipment Welding Procedure Evaluation
NB/T 47015 Pressure Vessel Welding Procedure
JB/T 4711 Pressure Vessel Coating and Transport Packaging
|