HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

JJF 1253-2010 English PDF

US$299.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
JJF 1253-2010: Calibration specification for dial snap gauges
Status: Valid

JJF 1253: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
JJF 1253-2010English299 Add to Cart 3 days [Need to translate] Calibration specification for dial snap gauges Valid JJF 1253-2010
JJF 1253-1990English199 Add to Cart 2 days [Need to translate] O.T.N. of the Primary Standard for International Rubber Hardness Degree Obsolete JJF 1253-1990

PDF similar to JJF 1253-2010


Standard similar to JJF 1253-2010

GB/T 36126   JJF 1368   GB/T 1885   JJF 1261.10   JJF 1250   JJF 1247   

Basic data

Standard ID JJF 1253-2010 (JJF1253-2010)
Description (Translated English) Calibration specification for dial snap gauges
Sector / Industry Metrology & Measurement Industry Standard
Classification of Chinese Standard A53
Classification of International Standard 17.040
Word Count Estimation 13,113
Date of Issue 2010-05-11
Date of Implementation 2010-08-11
Quoted Standard JJF 1001-1998; JJF 1059-1999; JB/T 10017-1999
Regulation (derived from) AQSIQ Announcement No. 50 of 2010
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine
Summary This standard applies to dividing the value/resolution is 0. 005mm, 0. 01mm, 0. 02mm, 0. 05mm, 0. 1mm measuring range (5 ~ 100) mm with a table card gauge calibration.

JJF 1253-2010: Calibration specification for dial snap gauges

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Calibration specification for dial snap gauges People's Republic of China National Metrology Technical Specifications Table with caliper calibration specification Issued on. 2010-05-11 2010-08-11 implementation The State Administration of Quality Supervision, Inspection and Quarantine released Table with caliper calibration specification This specification by the State Administration of Quality Supervision, Inspection and Quarantine approved on May 11, 2010, and from From August 11, 2010 into effect. NFP. National Engineering Geometrical Parameters Measurement Technology Committee Main drafting unit. Guangxi Institute of measurement testing Heilongjiang Provincial Academy of verification test Participated in the drafting. Guilin Measuring & Cutting Tool Co., Ltd. Guilin Guanglu Measuring Instrument Co., Ltd. This specification by the National Engineering Geometrical parameter measurement technology committee responsible for the interpretation The main drafters of this specification. Lu Rui (Guangxi Institute of measurement detection) Liang Yuhong (Heilongjiang Provincial Academy of verification test) Full Yi-chi (Guangxi Institute of measurement detection) Drafters participate. Zhao Weirong (Guilin Measuring & Cutting Tool Co., Ltd.) Li Haiping (Guilin Guanglu Measuring Instrument Co., Ltd.)

table of Contents

1 Scope (1) 2. Referenced Documents (1) 3 Overview (1) 4 Metrological characteristics (2) 4.1 Working stroke (2) 4.2 jaws probe measuring surface roughness of the surface (2) 4.3 measuring force and measuring the force change (2) 4.4 Indication variability (3) 4.5 Indication error (3) Calibration Condition 5 (3) Environmental conditions 5.1 (3) 5.2 Measurement Standards (3) 6 calibration items and calibration methods (3) 6.1 jaws probe measuring surface roughness of a surface (3) 6.2 measuring force and the measuring force change (3) 6.3 Working stroke (4) 6.4 Indication variability (4) 6.5 Indication Error (4) 7 Calibration Results The expression (4) 8 Recalibration interval (4) Appendix A band sheet calipers indication error of measurement Uncertainty Evaluation (5) Appendix B calibration certificate contents (8) Table with caliper calibration specification

1 Scope

This instruction applies to Division value/resolution of 0.005mm, 0.01mm, 0.02mm, 0.05mm, 0.1mm, Range is (5 ~ 100) mm calibration card table with regulations.

2 Citations

This specification references the following documents. JJF 1001-1998 common measurement terms and definitions JJF 1059-1999 Evaluation and Expression of Uncertainty in Measurement Table caliper JB/T 10017-1999 belt When using this specification it should be noted that using the currently valid version of the documents cited.

3 Overview

Table with caliper is leverage actuator relative displacement of the jaws of the probe into the instruction sheet (Analog and digital display A metrological instrument type) showing the value can be measured diameter, outside diameter, the groove, the outer groove, thickness, wall thickness and tube thickness size. Its structure and use a wild card into table with two kinds of regulatory rules within the table with the card, its shape structure diagram shown in Figure 1 ~ Figure 4.

1 Analog band sheet calipers

1- probe; 2- jaws; 3 - a tension spring; 4- indicator; 5- handle; 6- lever

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JJF 1253-2010_English be delivered?

Answer: Upon your order, we will start to translate JJF 1253-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JJF 1253-2010_English with my colleagues?

Answer: Yes. The purchased PDF of JJF 1253-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version JJF 1253-2010?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JJF 1253-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.