HOME   Cart(2)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

JG/T 430-2014 English PDF

US$389.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
JG/T 430-2014: Anticorrosion lubricating grease for unbonded tendons
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
JG/T 430-2014English389 Add to Cart 3 days [Need to translate] Anticorrosion lubricating grease for unbonded tendons Valid JG/T 430-2014

PDF similar to JG/T 430-2014


Standard similar to JG/T 430-2014

GB 50017   JGJ 107   JG/T 163   JGJ/T 430   JG/T 161   JG/T 428   

Basic data

Standard ID JG/T 430-2014 (JG/T430-2014)
Description (Translated English) Anticorrosion lubricating grease for unbonded tendons
Sector / Industry Building & Construction Industry Standard (Recommended)
Classification of Chinese Standard P27
Classification of International Standard 93.020
Word Count Estimation 15,114
Date of Issue 1/21/2014
Date of Implementation 4/1/2014
Older Standard (superseded by this standard) JG/T 3007-1993
Quoted Standard GB/T 264; GB/T 269; GB/T 512; GB/T 514; GB/T 1040.1; GB/T 1040.2; GB/T 2361; GB/T 4929; GB/T 7325; NB/SH/T 0324; SH/T 0081; SH 0164; SH/T 0229; SH/T 0325; SH/T 0327; SH/T 0331
Regulation (derived from) ?Ministry of Housing and Urban-Rural Development Announcement No. 285; Industry-Standard-Filing Announcement 2014 No. 4 (total No. 172)
Issuing agency(ies) Ministry of Housing and Urban-Rural Development of the People's Republic of China
Summary This Standard specifies the unbonded tendons corrosion grease with terms and definitions, classification, requirements, test methods, inspection rules, marking, packaging, transport and storage. This Standard applies to the fatty acid soap thickener highl

JG/T 430-2014: Anticorrosion lubricating grease for unbonded tendons

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Anticorrosion lubricating grease for unbonded tendons ICS 93.020 P27 People's Republic of China building industry standards Replacing JG/T 3007-1993 Unbonded prestressed tendons with anti-corrosion grease Published on.2014-01-21 2014-04-01 implementation Ministry of Housing and Urban-Rural Development, People's Republic of China released Directory Preface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 Categories 3 5 Requirements 3 6 test methods 3 7 inspection rules 4 8 logo, packaging, transportation and storage 6 Appendix A (Normative) Low-temperature grease performance test methods 7 Appendix B (Normative) Grease and sheath compatibility test method 10

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard is JG/T 3007-1993 "unbonded prestressed tendon anti-corrosion grease," the amendment, this standard and JG/T 3007- The main technical changes compared to.1993 are as follows. --- Modify the standard Chinese name, from "unbonded prestressed tendon-specific anti-corrosion grease" to "unbonded prestressed tendon with anti-corrosion Grease "; --- Modify the standard English name, from "Corrosion-resistant andlubricatinggreasespecializedforun- --- Modify the description of the range (see Chapter 1,.1993 edition Chapter 1); --- Modify the formulation of terms and definitions (see Chapter 3, Chapter 3 of the.1993 edition); --- Increase the definition of ash (see 3.13); --- Increasing the definition of ambient temperature (see 3.14); --- Removed the "code and mark", an increase of "classification" (see Chapter 4,.1993 edition Chapter 4); --- Increased No. 3 unbonded prestressed tendons with anti-corrosion grease technical requirements (see Chapter 5); --- Modify the drop point, the network of oil, the pressure drop after oxidation quality indicators (see Chapter 5,.1993 edition Chapter 5); --- Increase the quality indicators of ash (see Chapter 5); --- Modify the damp heat test method of test grease coating method (see 6.8,.1993 edition of 6.8); --- Modify the compatibility test method (see 6.11,.1993 edition of 6.11); --- Increasing the test method of ash (see 6.12); --- Removed the "sampling", the relevant content into the "Inspection Rules" (see 7.3,.1993 edition 9); --- Added "Judgment Rules" and "Re-inspection Rules", deleted "Judgment of test results" (see 7.4 and 7.5,.1993 version 7.5); --- Added "low-temperature grease performance test methods" (see Appendix A); --- Increased "grease and sheath compatibility test method" (see Appendix B). This standard proposed by the Ministry of Housing and Urban Standard and Design Institute. This standard by the Ministry of Housing and Urban Construction Building Standardization Technical Committee centralized. This standard was drafted. China Academy of Building Research, Hangzhou, Zhejiang anchor prestressed Co., Ltd., Wuxi Feitian Oil Co., Ltd., Tianjin City crown Grease Co., Ltd., Changsha City Petrochemical Co., Ltd., Liuzhou Olivier Machinery Co., Ltd., Tianjin Gimhae Lee Oil Co., Ltd., Beijing Institute of Construction Engineering Co., Ltd., Tianjin Yin Yan Prestressed Co., Ltd., Tianjin Shengwen prestressed Machinery Co., Ltd., building research (Beijing) Structural Engineering Co., Ltd. The main drafters of this standard. Chen Qian, Peng Ji Min, Zhang Qunmin, Song Zi Liang, Huang Fang Wei, while the sea, Lin Chih-cheng, Luo Yuzhi, Tang Shijun, Li Chunyao, Zhang Qiang, Cui Jin, Zhang Qingjie. This standard replaces the standards previously issued as follows. --- JG/T 3007-1993. Unbonded prestressed tendons with anti-corrosion grease

1 Scope

This standard specifies the terms and definitions, classification, requirements, test methods, inspection rules, signs, Packaging, transportation and storage. This standard applies to fatty acid soap thickening of the depth of the refined base oil, and added a variety of additives obtained for ambient temperature -40 ℃ ~ 70 ℃ non-bonded prestressed tendons with anti-corrosion grease.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 264 Petroleum products - Determination of acid value GB/T 269 Grease and grease cone penetration determination GB/T 512 grease moisture method GB/T 514 petroleum products - Test glass liquid thermometer - Technical conditions GB/T 1040.1 Plastics - Determination of tensile properties - Part 1. General GB/T 1040.2 Determination of tensile properties of plastics - Part 2. Test conditions for molding and extrusion of plastics GB/T 2361 anti-rust grease heat test method GB/T 4929 grease dropping point assay GB/T 7325 grease and lubricating oil evaporation loss assay Determination of lubricating oil grease cone method SH/T 0081 anti-rust oil spray test method SH0164 petroleum products packaging, storage and delivery and acceptance rules SH/T 0229 Sampling methods for solid and semi-solid petroleum products SH/T 0325 Grease oxidation stability test SH/T 0327 greases - Determination of ash content SH/T 0331 grease corrosion test method

3 Terms and definitions

The following terms and definitions apply to this document. 3.1 Grease lubricatinggrease The thickener is dispersed in a liquid lubricant to form a stable semi-fluid to solid product. This product can be added Aims to improve the characteristics of additives and fillers. 3.2 Workconepenetration In the standard grease work, the grease sample is heated to 25 ℃ after 60 reciprocating work, the standard cone vertical drop 5s,

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JG/T 430-2014_English be delivered?

Answer: Upon your order, we will start to translate JG/T 430-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JG/T 430-2014_English with my colleagues?

Answer: Yes. The purchased PDF of JG/T 430-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.