|
US$649.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GBZ29619.3-2013: Digital data communication for measurement and control -- Fieldbus for use in industrial control systems -- Type 8: INTERBUS specification -- Part 3: Data Link service definition
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/Z 29619.3-2013 | English | 649 |
Add to Cart
|
5 days [Need to translate]
|
Digital data communication for measurement and control -- Fieldbus for use in industrial control systems -- Type 8: INTERBUS specification -- Part 3: Data Link service definition
| Valid |
GB/Z 29619.3-2013
|
PDF similar to GBZ29619.3-2013
Basic data | Standard ID | GB/Z 29619.3-2013 (GB/Z29619.3-2013) | | Description (Translated English) | Digital data communication for measurement and control -- Fieldbus for use in industrial control systems -- Type 8: INTERBUS specification -- Part 3: Data Link service definition | | Sector / Industry | National Standard | | Classification of Chinese Standard | N10 | | Classification of International Standard | 25.040 | | Word Count Estimation | 28,259 | | Quoted Standard | GB/T 9387.1-1998; GB/T 9387.3-2008; GB/T 17547-1988; GB/T 17967-2000; GB/Z 29619.4 | | Adopted Standard | IEC 61158-2003, MOD | | Regulation (derived from) | National Standards Bulletin 2013 No. 10 | | Issuing agency(ies) | Ministry of Health of the People's Republic of China | | Summary | This standard applies to: INTERBUS data link layer: a) service primitives actions and events, b) primitive actions and events related parameters and their uses format, c) relationship between actions and events and their effective order. This standard is | GBZ29619.3-2013: Digital data communication for measurement and control -- Fieldbus for use in industrial control systems -- Type 8: INTERBUS specification -- Part 3: Data Link service definition
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Digital data communication for measurement and control. Fieldbus for use in industrial control systems. Type 8. INTERBUS specification.Part 3. Data Link service definition
ICS 25.040
N10
People's Republic of China national standardization of technical guidance documents
Measurement and control of digital data communications industrial control systems
With the fieldbus type 8.INTERBUS specification
Part 3. Data Link Service Definition
Fieldbus for use in industrial control systems-
Part 3.DataLinkservicedefinition
(IEC 61158.2003, MOD)
2013-07-19.2013-12-15 implementation
General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
China National Standardization Administration released
Directory
Foreword Ⅲ
Introduction IV
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
3.1 Reference Model Terms and Definitions 1
3.2 Terms and definitions of service agreement 2
3.3 Additional Terms and Definitions 3
4 symbols and abbreviations 4
5 agreement 5
5.1 Conventions Summary 5
5.2 Parameter 5
6 Data Link Services and Concepts 5
6.1 Overview 5
6.2 The order of primitives 7
6.3 Connection-mode data link service 9
7 DL-management service 12
7.1 Scope 12
7.2 DL-management service functions 12
7.3 Service Overview 13
7.4 Interaction Overview 13
7.5 Detailed Specifications of Services and Interactions
References 22
Figure 1 data link layer and other layers of the relationship Ⅳ
Figure 2 DLSAP and DLSAP address relationship 3
Figure 3 Relationship between DLCEP and DLCEP-addresses for default DLSAP
Figure 4 buffer data transmission primitive order 8
Figure 5 normal data transmission between the master and slave 9
Figure 6 failed order of the normal data transmission primitives 9
Figure 7 Reset service primitive sequence 14
Figure 8 Event service primitive sequence 14
Figure 9 Setvalue service primitive order 14
Figure 10 Getvalue service primitive order 15
Figure 11 Getcurrentconfiguration service primitive order 15
Figure 12 Getactiveconfiguration service primitive order 15
Figure 13 Setactiveconfiguration service primitive order 15
Table 1 DL-connection-mode and parameter summary 7
Table 2 Putbuffer primitives and parameters 10
Table 3 Getbuffer primitives and parameters 10
Table 4 Bufferreceived primitives and parameters 11
Table 5 normal data transmission primitives and parameters 12
Table 6 DL-management primitives and parameters summary 14
Table 7 Reset service primitives and parameters 16
Table 8 Event Service primitives and parameters 16
Table 9 Setvalue service primitives and parameters 17
Table 10 Getvalue service primitives and parameters 18
Table 11 Getcurrentconfiguration services primitives and parameters 19
Table 12 Getactiveconfiguration services primitives and parameters 20
Table 13 Activeconfiguration parameters 20
Table 14 Setactiveconfiguration services primitives and parameters 21
Foreword
GB /Z 29619 "Measurement and Control Digital Data Communications Industrial Control Systems Fieldbus Type 8. INTERBUS Specification"
Former divided into the following six sections.
--- Part 1. Overview;
--- Part 2. Physical layer specification and service definition;
--- Part 3. Data Link Service Definition;
--- Part 4. Data link protocol specification;
--- Part 5. Application layer service definition;
--- Part 6. Application layer protocol specification.
This section GB /Z 29619 Part 3.
This section drafted in accordance with the rules given GB/T 1.1-2009 and GB/T 20000.2-2009.
GB /Z 29619 modified using IEC 61158.2003 "Measurement and Control Digital Data Communications Industrial Control Systems Fieldbus"
Part of the content, no adjustment in the technical content, the structure is divided into 6 parts to meet the needs of different users to use alone.
For ease of use, this section made the following editorial changes.
a) According to the actual use of our country, in accordance with the provisions of GB/T 1.1-2009, the original text was edited editorial changes
The content of surgery is exactly the same
b) reference to the original text of other international standards have been adopted or modified as our standard, this part of our standard number instead
Corresponding to the international standard number, the rest have not been the same or modified to use as our standard international advanced standards, are in this section
Direct reference.
This part is proposed by China Machinery Industry Federation.
This part of the National Industrial Process Measurement and Control Standardization Technical Committee (SAC/TC124) centralized.
This part of the drafting unit. Machinery Industry Instrumentation Technology and Economy Institute, Tsinghua University, Southwest University, Beijing Iron and Steel Design and Research
General Hospital, Shanghai Automation Instrumentation Co., Ltd., Shanghai Institute of Industrial Automation Instrumentation, Nanjing Phoenix Contact Electric Co., Ltd.
The main drafters of this section. Mei Ke, Zheng Xu, Liu Feng, Bao Weihua, Li Baihuang, Liu Zhaohui.
Introduction
INTERBUS is a digital serial communication system used in control systems (such as programmable logic controllers) and industrial sensors and actuators
Communication between field devices. These devices include simple limit switches and valves, as well as measurement sensors, measurement transmitters and actuators, and also
Can include sophisticated high-tech control systems such as controllers that control drive, torque, and process.
This section describes the data link service (DL-service), which is closely related to other parts of GB /Z 29619. GB /Z 29619
Defined by the "three-layer" reference model of a fieldbus based on a partially open system interconnection basic reference model. Two reference modes for ease of management
Type will be broken down into a series of standard interconnection standards layer.
Data Link Protocol (see GB /Z 29619.4) The use of the physical layer (see GB /Z 29619.2) services to provide data link services. Headquarters
The INTERBUS technical specification defines data link service features that can be directly used by higher level protocols. Close between layers
See Figure 1.
Figure 1 data link layer and other layers of the relationship
The term "service" refers to the abstraction provided by a layer of the OSI basic reference model for its immediately preceding layer. because
This, data link services in this standard is a conceptual architecture services, it is not directly related to the management and implementation.
Measurement and control of digital data communications industrial control systems
With the fieldbus type 8.INTERBUS specification
Part 3. Data Link Service Definition
1 Scope
This section GB /Z 29619 in an abstract way to define the external visual services provided by the INTERBUS data link layer, it by
Help
a) Service primitive actions and events;
b) primitive actions and event-related parameters and the format they use;
c) the relationship between actions and events and their effective order.
The purpose of this section is to define the services provided by the following two items.
1) INTERBUS application layer at the interface between the application layer and the data link layer;
2) System management at the interface between the data link layer and the system management of the fieldbus reference model.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 9387.1-1998 Information technology - Open Systems Interconnection basic reference model Part 1. Basic model (idtISO /
IEC 7498-1.1994)
GB/T 9387.3-2008 Information technology - Open Systems Interconnection Basic Reference Model Part 3. Naming and addressing (ISO /
IEC 7498-3.1997, IDT)
GB/T 17547-1998 Information technology - Open Systems Interconnection Data Link Service Definition (idtISO /IEC 8886.1996)
GB/T 17967-2000 Information Technology Open Systems Interconnection basic reference model OSI service definition convention (idtISO /
IEC 10731.1994)
GB /Z 29619.4 Measurement and control of digital data communications Fieldbus type for industrial control systems 8. INTERBUS specification
Part 4. Data Link Protocol Specification (GB /Z 29619.4-2013, IEC 61158.2003, MOD)
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Reference Model Terms and Definitions
GB/T 9387.1-1998 and GB/T 9387.3-2008 define the following terms apply to this document.
3.1.1 DL address DL-address [GB/T 9387.3-2008]
3.1.2 DL connection DL-connection [GB/T 9387.1-1998]
3.1.3 DL connection endpoint DL-connection-end-point [GB/T 9387.1-1998]
3.1.4 DL connection endpoint identifier DL-connection-end-point-identifier [GB/T 9387.1-1998]
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GBZ29619.3-2013_English be delivered?Answer: Upon your order, we will start to translate GBZ29619.3-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GBZ29619.3-2013_English with my colleagues?Answer: Yes. The purchased PDF of GBZ29619.3-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|