GB/T 45084-2024 PDF English
US$275.00 · In stock · Download in 9 secondsGB/T 45084-2024: Technical specification for trading and traceability of reused and remanufactured parts of end-of-life vehicles Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 45084-2024 | English | 275 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Technical specification for trading and traceability of reused and remanufactured parts of end-of-life vehicles
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 45084-2024
GB/T 45084-2024: Technical specification for trading and traceability of reused and remanufactured parts of end-of-life vehicles
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT45084-2024
GB
NATIONAL STANDARD OF THE
PEOPLE'S REPUBLIC OF CHINA
ICS 13.030.50
CCS Z 01
Technical specification for trading and traceability of reused
and remanufactured parts of end-of-life vehicles
ISSUED ON: NOVEMBER 28, 2024
IMPLEMENTED ON: JUNE 1, 2025
Issued by: State Administration for Market Regulation;
Standardization Administration of PRC.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Terms and definitions ... 5
4 Trading entities and paths ... 6
5 Transaction management ... 7
6 Traceability entities and processes ... 9
7 Traceability information ... 11
8 Traceability information system ... 11
9 Verification method ... 12
Appendix A (Normative) Traceability information record ... 13
References ... 20
Technical specification for trading and traceability of reused
and remanufactured parts of end-of-life vehicles
1 Scope
This document specifies the trading entities and paths, transaction management,
traceability entities and processes, traceability information and traceability information
system requirements for reused and remanufactured parts of end-of-life vehicles, and
describes the verification methods for transaction and traceability-related requirements
for reused and remanufactured parts of end-of-life vehicles.
This document applies to the transaction and traceability of reused and remanufactured
parts of end-of-life vehicles.
2 Normative references
The provisions of the following documents constitute the essential clauses of this
document through normative references in this text. Among them, for referenced
documents with dates, only the versions corresponding to the dates are applicable to
this document; for referenced documents without dates, the latest versions (including
all amendments) are applicable to this document.
GB 22128 Technical specifications for end-of-life vehicles collecting and
dismantling enterprises
GB/T 22239-2019 Information security technology - Baseline for classified
protection of cybersecurity
GB/T 26989 Automobile recovery - Terminology
GB/T 28619 Remanufacturing - Terminology
GB/T 32007 Unified coding and identification for auto parts
GB/T 33221 Remanufacturing - Technological specifications for enterprise
GB/T 33947 Remanufacturing - Technical specifications of machining for
mechanical products
GB/T 39895 Remanufactured automotive components - Specifications of labels
GB/T 44728 Technical specification for reused parts traceability management of
end-of-life vehicles
HJ 348 Environmental protection technical specifications for disassembly of end-
of-life vehicles
SB/T 11237 Identification and classification for reused parts of end-of-life vehicles
3 Terms and definitions
The terms and definitions defined in GB 22128, GB/T 26989 and GB/T 28619 and the
following apply to this document.
3.1 reused parts
Reusable parts dismantled from end-of-life vehicles.
[Source: GB 22128-2019, 3.11]
3.2 remanufacturable parts
Used parts that have been tested and confirmed to meet the requirements for
remanufacturing through processing and repair.
[Source: GB/T 28676-2012, 3.2]
3.3 remanufactured part
The products that are made of remanufacturable parts, which have been restored to their
original technical performance and product quality after a series of remanufacturing
processes.
NOTE: "Remanufactured parts" are also called "remanufactured products".
[Source: GB/T 39895-2021, 3.1, modified]
3.4 reused parts service enterprise
An organization that is engaged in the sale and after-sales service of reused parts and
has technical service capabilities such as secondary removal, cleaning, and testing.
[Source: GB/T 44728-2024, 3.2]
3.5 remanufacturing reverse logistics recovery enterprise
An organization that is engaged in the recovery, removal, cleaning, testing, sales, and
other operating activities of remanufacturable parts.
4.4 Remanufacturing reverse logistics recovery enterprises shall have the technical
equipment and capabilities for disassembly, cleaning and product quality testing of used
automobile parts, and the ability to test the performance of remanufactured parts.
4.5 Auto parts remanufacturing enterprises shall comply with the requirements of GB/T
33221, and the remanufacturing process shall comply with the requirements of GB/T
33947. They shall have the technical equipment and capabilities for disassembly,
cleaning, and product quality testing of used auto parts, shall have the ability to test the
performance of remanufactured parts, and shall establish and implement technical
quality standards and production specifications for remanufactured parts.
4.6 Sales organizations shall have the ability to store, sell, and provide after-sales
services for reused and remanufactured parts. Sales organizations include auto repair
shops, auto parts sellers, auto dealers, auto after-sales service providers, and self-built
sales organizations of ELV collecting and dismantling enterprises, reused parts service
enterprises, and auto parts remanufacturing enterprises.
4.7 ELV collecting and dismantling enterprises and reused parts service enterprises are
the producers of reused parts and are responsible for the quality of reused parts;
automobile parts remanufacturing enterprises are the producers of remanufactured parts
and are responsible for the quality of remanufactured parts.
4.8 Trading entities (excluding consumers) shall establish a record of the storage and
sales of end-of-life vehicle parts and components, and truthfully record the source,
quantity, model, flow direction and other information of the reused, remanufacturable,
or remanufactured parts of end-of-life vehicles.
5 Transaction management
5.1 Product requirements
5.1.1 Product quality
5.1.1.1 Reused parts shall be subjected to appearance inspection and technical testing
in accordance with SB/T 11237, and performance requirements shall comply with the
provisions of SB/T 11237.
5.1.1.2 Remanufactured parts shall be subjected to the same inspection and testing as
the original model new products before leaving the factory, and shall have the same
quality characteristics as the original model new products.
5.1.1.3 The safety standards of remanufactured parts shall not be lower than the national
requirements for new motor vehicle parts of original models, and their environmental
performance shall comply with relevant national standards.
5.1.2 Labeling
5.1.2.1 The labeling of reused parts for sale shall comply with the requirements of SB/T
11237 and shall include but not be limited to the following:
a) The words "Reused parts from end-of-life vehicles";
b) The name, model, and applicable vehicle type of the reused part;
c) The name, address, and contact information of the ELV collecting and
dismantling enterprise or the reused parts service enterprise;
d) The number or name of the quality inspection and assessment personnel;
e) Traceability code of the reused part;
f) Connection and access methods of the reused parts traceability information
platform;
g) The factory date when the reused part was dismantled or identified;
h) The original factory date of the reused part.
5.1.2.2 The labeling of remanufactured parts for sale shall comply with the
requirements of GB/T 39895 and shall include but not be limited to the following:
a) Auto parts remanufacturing product labeling;
b) The Chinese name of the product;
c) The name or registered trademark of the remanufacturing enterprise;
d) Serial number of the remanufactured part;
e) Production date of the remanufactured part;
f) Specification or model of the remanufactured part;
g) The quality standards to which the remanufactured parts conform;
h) Traceability code of the remanufactured part;
i) Connection and access methods of the remanufactured parts traceability
information platform;
j) The statement that the product is only intended for after-sales maintenance and
shall not be used for new product assembly.
5.2 Product sales
5.2.1 The sale and purchase of reused and remanufactured parts shall follow the trading
path shown in 4.1. The reused and remanufactured parts may also be traded between
different sales organizations.
5.2.2 The "five major assemblies" should be sold to automobile parts remanufacturing
enterprises that have passed the remanufacturing quality management system
certification. Reused parts and remanufactured parts shall not enter the complete
automobile production process.
5.2.3 The buyer shall be informed that the parts are reused or remanufactured. The
reused and remanufactured parts sold shall be accompanied by a quality assurance
certificate.
5.2.4 The sales information of reused and remanufactured parts shall be recorded and
sales invoices shall be issued.
5.2.5 Automobile maintenance enterprise shall indicate the use of reused and
remanufactured parts in the settlement statement issued to consumers and upload it onto
the automobile maintenance electronic health record system.
5.3 After-sales service
5.3.1 The seller and buyer of reused and remanufactured parts shall agree on the
warranty period and the after-sales service shall be provided in accordance with the
agreed requirements of both parties.
5.3.2 For remanufactured parts, after-sales service no less than that of original model
new products shall be provided.
5.3.3 The seller of reused and remanufactured parts shall establish an after-sales service
network and have the ability to perform the agreed after-sales service.
6 Traceability entities and processes
6.1 The entities involved in the traceability of reused parts transactions include but are
not limited to ELV collecting and dismantling enterprises, reused parts service
enterprises, sales organizations, and consumers. The traceability process of reused parts
transactions is shown in Figure 2.
responsible for the organization and implementation of the traceability work, and shall
be equipped with special equipment and information systems such as information
collection, output, reading and writing equipment necessary for the traceability work.
6.4 The traceability entity shall provide a unique traceability code for the reused and
remanufactured parts sold.
7 Traceability information
7.1 Traceability information shall be searchable through traceability codes. The
traceability code coding rules and traceability code labeling of reused parts shall comply
with the requirements of GB/T 44728; the coding rules and traceability code labeling
of remanufactured parts shall comply with the requirements of GB/T 32007.
7.2 Traceability information shall include but not be limited to entity information,
production information, logistics information, product information and sales
information.
7.3 The traceability information provided by the traceability entity of the reused parts
shall include the basic information in Table A.1 of Appendix A, and may include the
extended information in Table A.1. The traceability information provided by the
traceability entity of the remanufactured parts shall include the basic information in
Table A.2, and may include the extended information in Table A.2.
7.4 The collected traceability information shall be timely entered into the traceability
information system, backed up regularly, and stored for a long time. The retention
period of the traceability information of the reused parts shall be counted from the date
of the reused parts leaving the factory, and shall not be less than 3 years; the retention
period of the traceability information of the remanufactured parts shall not be less than
the quality assurance period promised by the manufacturer.
8 Traceability information system
8.1 It shall have functional modules such as traceability entity selection, traceability
entity information registration, data information collection, data information exchange
and sharing, data information query, quality feedback, and data statistical analysis.
8.2 It shall have the function of integrating the fragmented data provided by different
traceability entities to the traceability information system to form the transaction
traceability data of reused parts and remanufactured parts.
8.3 System interface specifications shall be established and made public to facilitate the
connection BETWEEN the information systems of the end-of-life vehicle reused or
remanufactured parts trading platform, traceability entities or other participants AND
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 45084-2024 be delivered?Answer: The full copy PDF of English version of GB/T 45084-2024 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 45084-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 45084-2024_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 45084-2024 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB/T 45084-2024?A step-by-step guide to download PDF of GB/T 45084-2024_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 45084-2024".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|