|
US$399.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 42742-2023: Technical requirements for L band 75kW continuous wave magnetron
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 42742-2023 | English | 399 |
Add to Cart
|
4 days [Need to translate]
|
Technical requirements for L band 75kW continuous wave magnetron
| Valid |
GB/T 42742-2023
|
PDF similar to GB/T 42742-2023
Standard similar to GB/T 42742-2023 GB/T 12631 GB/T 7274 Basic data | Standard ID | GB/T 42742-2023 (GB/T42742-2023) | | Description (Translated English) | Technical requirements for L band 75kW continuous wave magnetron | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | L37 | | Classification of International Standard | 31.100 | | Word Count Estimation | 19,135 | | Date of Issue | 2023-05-23 | | Date of Implementation | 2023-12-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 42742-2023: Technical requirements for L band 75kW continuous wave magnetron---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 31:100
CCSL37
National Standards of People's Republic of China
Technical Requirements for L-Band 75kW CW Magnetron
Released on 2023-05-23
2023-12-01 implementation
State Administration for Market Regulation
Released by the National Standardization Management Committee
table of contents
Preface III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Requirements 1
4:1 General 1
4:2 Structure 1
4:3 Dimensions and electrode wiring 2
4:4 Absolute Ratings 4
4:5 Operating conditions and typical characteristics 4
4:6 General test conditions 5
4:7 Warranty period 6
4:8 Flag 6
4:9 Security requirements 6
4:10 Appearance quality 7
5 Quality assessment procedure 7
5:1 General 7
5:2 Appraisal and Approval Procedures 7
5:3 Quality Consistency Inspection (QCI) 7
5:4 Packaging Inspection 9
5:5 Resubmission of unqualified batches 10
6 packs of 10
6:1 Packaging requirements 10
6:2 Packaging mark 10
7 Notes 10
7:1 Contents of order documents 10
7:2 Precautions for use 10
Appendix A (Normative) Appearance Inspection Requirements 11
A:1 General rules for visual inspection11
A:2 Ceramic defects 11
A:3 Flag defects 11
A:4 Plating Defects 11
Appendix B (Normative) Inspection and Test Methods 12
B:1 Filament continuity test 12
B:2 Life test 12
B:3 Judgment method for non-working defects 12
B:4 Efficiency calculation method12
Appendix C (informative) aging method 14
Figure 1 Magnetron outline drawing 2
Figure 2 Magnetron Electrode Wiring Diagram 3
Figure 3 Filament working curve 6
Table 1 Dimensions and requirements of magnetron 3
Table 2 Absolute Ratings4
Table 3 Working conditions 4
Table 4 Parameter items and requirements of typical characteristics5
Table 5 General Test Conditions (TC) 5
Table 6 Identification and approval test items (Group D) 7
Table 7 Group A---batch by batch inspection 8
Table 8 Group B---Batch-by-batch inspection 8
Table 9 Group C---period test 9
Table 10 Packaging Inspection 9
Table A:1 Defect classification 11
Table C:1 Burn-in control requirements14
foreword
This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents"
drafting:
Please note that some content of this document may involve patents, and the issuing organization of this document does not undertake the responsibility for identifying patents:
This document is proposed by the Ministry of Industry and Information Technology of the People's Republic of China:
This document is under the jurisdiction of the National Electric Vacuum Device Standardization Technical Committee (SAC/TC167):
This document is drafted by: Nanjing Sanle Group Co:, Ltd:, Nanjing Sanle Microwave Technology Development Co:, Ltd:, Anhui Huadong Photoelectric Technology Research Institute
Research Institute Co:, Ltd:, Kunshan Guoli Electronic Technology Co:, Ltd:
The main drafters of this document: Wang Rongchuan, Zhao Qingliang, Chen Yang, Yang Zhaohui, Zhang Li, Huang Hao, Liu Aixin:
Technical Requirements for L-Band 75kW CW Magnetron
1 Scope
This document specifies the performance requirements, quality assessment procedures, packaging and instructions, etc: of L-band 75kW continuous wave magnetrons:
This document applies to L-band 75kW continuous wave magnetrons with frequencies of 896MHz, 915MHz, 922MHz, and 929MHz (with
hereinafter referred to as "magnetron") production, testing, packaging and use:
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text: Among them, dated references
For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
this document:
GB/T 191-2008 Packaging, storage and transportation icon marks
GB/T 2423:1-2008 Environmental testing for electrical and electronic products - Part 2: Test methods Test A: Low temperature
GB/T 2423:2-2008 Environmental testing for electrical and electronic products - Part 2: Test methods Test B: High temperature
GB/T 2423:3-2016 Environmental Testing Part 2: Test Method Test Cab: Constant Damp Heat Test
GB/T 2828:1-2012 Counting sampling inspection procedure Part 1: Batch-by-batch inspection sampling retrieved by acceptance quality limit (AQL)
plan
GB/T 4597-2012 Electron Tube Vocabulary
GB/T 4857:5-1992 Drop test method for packaging and transportation packages
GB/T 4857:10-2005 Basic tests for packaging and transportation packages - Part 10: Test method for sinusoidal frequency conversion vibration
GB 5959:6-2008 Safety of Electric Heating Devices Part 6: Safety Specifications for Industrial Microwave Heating Equipment
GB/T 9602-1988 Test method for electrical performance of continuous wave magnetron
GB/T 12852-2001 General Specifications for Magnetrons
SJ/T 11082-2000 Test method for electric tube heating wire or filament current and voltage
3 Terms and Definitions
The terms and definitions defined in GB/T 12852-2001 and GB/T 4597-2012 apply to this document:
4 requirements
4:1 General
The magnetron shall comply with the requirements of this document and GB/T 12852-2001: When the requirements of this document
In case of inconsistency, this document shall prevail:
4:2 Structure
The structure of the magnetron is as follows:
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 42742-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 42742-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 42742-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 42742-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|