HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 4217-2008 English PDF

US$154.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 4217-2008: Thermoplastics pipes for the conveyance of fluids -- Nominal outside diameters and nominal pressures
Status: Valid

GB/T 4217: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 4217-2008English154 Add to Cart 3 days [Need to translate] Thermoplastics pipes for the conveyance of fluids -- Nominal outside diameters and nominal pressures Valid GB/T 4217-2008
GB/T 4217-2001English279 Add to Cart 3 days [Need to translate] Thermoplastics pipes for the conveyance of fluids -- Nominal outside diameters and nominal pressures Obsolete GB/T 4217-2001
GB/T 4217-1984English199 Add to Cart 2 days [Need to translate] Thermoplastic pipes--Nominal outside diameters and nominal pressures--Metric series Obsolete GB/T 4217-1984

PDF similar to GB/T 4217-2008


Standard similar to GB/T 4217-2008

GB/T 3830   GB/T 10003   GB/T 8801   GB/T 4219.2   GB/T 4219.1   

Basic data

Standard ID GB/T 4217-2008 (GB/T4217-2008)
Description (Translated English) Thermoplastics pipes for the conveyance of fluids -- Nominal outside diameters and nominal pressures
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard G33
Classification of International Standard 83.040.20
Word Count Estimation 8,878
Date of Issue 2008-08-19
Date of Implementation 2009-05-01
Older Standard (superseded by this standard) GB/T 4217-2001
Quoted Standard GB/T 321-2005; GB/T 18475-2001
Adopted Standard ISO 161-1996, IDT
Regulation (derived from) National Standard Approval Announcement 2008 No.14 (Total No.127)
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the pressurized and non- pressurized fluid to use public transportation, said thermoplastic pipe outside diameter, and provides pressurized thermoplastic pipe nominal pressure, strength and overall service (design) coefficient minimum requirements. This standard applies to various processing methods and materials manufacturing, circular cross-section, outer wall smooth thermoplastic tubing.

GB/T 4217-2008: Thermoplastics pipes for the conveyance of fluids -- Nominal outside diameters and nominal pressures


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Thermoplastics pipes for the conveyance of fluids. Nominal outside diameters and nominal pressures ICS 83.040.20 G33 National Standards of People's Republic of China GB/T 4217-2008/ISO 161-1.1996 Replacing GB/T 4217-2001 Thermoplastics pipes for fluid transport Nominal outside diameter and nominal pressure (ISO 161-1.1996, IDT) Posted 2008-08-19 2009-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard is identical with ISO 161-1.1996 "fluid transport called diameters and nominal pressures - Part 1 Thermoplastics pipes for the public. Metric series, "the technical content and structure of the same standard, as only a few editorial changes. This standard replaces GB/T 4217-2001 "and the nominal outer diameter of said fluid delivery Thermoplastics pipes for the public." This standard compared with GB/T 4217-2001 The main changes are as follows. --- Normative references cited GB/T 321-2005 "priority number and priority number system"; --- Fixed GB T 4217-2001 of formula (4), (5) /; --- Table 1 in the "350" to "450"; --- Table 2 Note The "R20" to "R10"; --- Increased by reference. This standard by the National Plastics Standardization Technical Committee (SAC/TC48) centralized. This standard was drafted. Light Industry Institute of Plastics Processing Applications, Asia Plastics Co., Ltd., Hebei Baoshuo Pipe Co., Ltd.. Drafters of this standard. Li Tian Hua, Wang Zhiwei, Liyan Ying. This standard replaces the standards previously issued as follows. --- GB/T 4217-1984, GB/T 4217-2001. GB/T 4217-2008/ISO 161-1.1996 Thermoplastics pipes for fluid transport Nominal outside diameter and nominal pressure

1 Scope

This standard specifies the pressurized and non-pressurized fluid using public transport nominal diameter thermoplastic pipe and provides pressurized thermoplastic pipe Nominal pressure, the minimum required strength and overall service (design) coefficient. This standard applies to a variety of processing methods and materials, and a circular cross section, outer wall smooth thermoplastic tubing.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 321-2005 priority number and priority number system (ISO 3. 1973, IDT) GB/T 18475-2001 Thermoplastics pipes and fittings for pressure applications classification and designation - Overall service (design) coefficient (Eqv ISO 12162.1995)

3 Terms and Definitions

The following terms and definitions apply to this standard. 3.1 Provisions of the pipe or fitting socket diameter value in millimeters (mm). In the thermoplastic pipe systems, it applies in addition to the flange And a threaded outer dimensions represent all parts of thermoplastic piping system components. For ease of reference adopted integer. 3.2 3.2.1 Pipe or fittings spigot end any cross section of the outer circumference divided by π (pi) to the whole great circle to a value obtained by 0.1mm. 3.2.2 The minimum average outside diameter (3.2.1) allowed values. Note. In compliance with GB/T 4217 standard pipe products, the minimum average outer diameter equal to the nominal diameter (3.2.1). 3.3 GB/T 4217-2008/ISO 161-1.1996

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 4217-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 4217-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 4217-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 4217-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 4217-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 4217-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.