HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 25196-2018 English PDF

US$264.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 25196-2018: Cranes -- Monitoring for crane design working period
Status: Valid

GB/T 25196: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 25196-2018English264 Add to Cart 3 days [Need to translate] Cranes -- Monitoring for crane design working period Valid GB/T 25196-2018
GB/T 25196.1-2010English439 Add to Cart 3 days [Need to translate] Cranes -- Condition monitoring -- Part 1: General Obsolete GB/T 25196.1-2010

PDF similar to GB/T 25196-2018


Standard similar to GB/T 25196-2018

GB/T 24818.4   GB/T 23724.1   GB/T 24809.2   GB/T 25195.2   GB/T 25195.4   

Basic data

Standard ID GB/T 25196-2018 (GB/T25196-2018)
Description (Translated English) Cranes -- Monitoring for crane design working period
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard J80
Classification of International Standard 53.020.20
Word Count Estimation 14,182
Date of Issue 2018-12-28
Date of Implementation 2019-07-01
Older Standard (superseded by this standard) GB/T 25196.1-2010
Issuing agency(ies) State Administration for Market Regulation, China National Standardization Administration

GB/T 25196-2018: Cranes -- Monitoring for crane design working period

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Cranes--Monitoring for crane design working period ICS 53.020.20 J80 National Standards of People's Republic of China Replace GB/T 25196.1-2010 Crane design work cycle monitoring (ISO 12482.2014, IDT) Published on.2018-12-28 2019-07-01 implementation State market supervision and administration China National Standardization Administration issued

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 25196.1-2010 "Crane Status Monitoring Part 1. General", and GB/T 25196.1-2010 In comparison, the main technical changes are as follows. ---Modified standard name (see cover); --- Revised the scope of the content (see Chapter 1, Chapter 1 of the.2010 edition); ---Modified terms and definitions (see Chapter 3, Chapter 3 of the.2010 edition); --- Increased crane work records, design work cycle assessment (see Chapters 4 and 5); --- Revised the content of the special assessment (see Chapter 6, Chapters 4, 6, 7, and 9 of.2010); --- Increased the content of crane overhaul (see Chapter 7); --- Increased DWP calculations for cranes and hoisting mechanisms (see Appendix A, Appendix B); --- Removed the contents of the evaluation criteria for the series of lifting hoists in the original standard (see Appendix A of the.2010 edition). This standard uses the translation method equivalent to ISO 12482.2014 "Monitoring of crane design work cycle". The documents of our country that have a consistent correspondence with the international documents referenced in this standard are as follows. ---GB/T 6974.1-2008 Crane terminology Part 1. General terms (ISO 4306-1.2007, IDT) --- GB/T 20863.1-2007 Classification of cranes and cranes - Part 1. General (ISO 4301-1. 1986, IDT) ---GB/T 23724.1-2016 Crane inspection Part 1. General (ISO 9927-1.2013, IDT) For ease of use, the following editorial changes have been made to this standard. ---Remove references in the original text of the international standard. AS2550-1..2011Cranes, hoistsandwinches-Safeuse- Part 1. Generalrequirements) and Assessmentofexistingsteelstructures.recommendations Forestimationofremainingfatiguelife-backgrounddocumentsinsupporttotheimplemen- Ttation,harmonizationandfurtherdevelopmentoftheEurocodes,jointreport,EUR23252 EN,.2008. This standard was proposed by the China Machinery Industry Federation. This standard is under the jurisdiction of the National Crane Machinery Standardization Technical Committee (SAC/TC227). This standard is drafted by. Weihua Group Co., Ltd., Beijing Crane Transportation Machinery Design and Research Institute Co., Ltd. Participated in the drafting of this standard. Beijing Crane Transportation Machinery Design and Research Institute Henan Branch, Henan Mining Crane Co., Ltd., flange Tektronix Heavy Industry Co., Ltd., Foshan Nanhai Special Equipment Association, Henan Giant Crane Group Co., Ltd. The main drafters of this standard. Zhou Qiang, Lin Fukui, Li Yong, Ren Haitao, Yuan Xiufeng, Liang Jianxin, Zhang Shuxia, Gao Zheng. The previous versions of the standards replaced by this standard are. ---GB/T 25196.1-2010. Crane design work cycle monitoring

1 Scope

This standard specifies the method for monitoring the actual working conditions of the crane during long-term use, and specifies and grading (related design standards). See ISO 4301-1) for the initial design work tasks to be compared. The closer to the design life limit, the possibility of danger The greater the sex. The crane usage monitoring method specified in this standard is used to predict whether the crane is close to the design life limit and pay attention to the crane off Special inspection of the key parts. This standard is mainly used to adjust or change the inspection requirements specified in ISO 9927-1. This standard applies to cranes with a permanent construction throughout their life. This standard does not apply to mobile and tower cranes, except for permanently installed tower cranes. Note. The methods specified in this standard are used by standards or procedures in addition to ISO 4301-1, which can be classified.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only the dated version applies to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. ISO 4301-1 Classification of cranes and cranes - Part 1. General (Cranesandliftingappliances-Classifi- cation-Part 1.General) ISO 4306-1 Crane Terminology Part 1. Generic Terminology (Cranes-Vocabulary-Part 1. General) ISO 9927-1 Crane inspection Part 1. General (Cranes-Inspections-Part 1. General)

3 Terms and definitions

The following terms and definitions defined by ISO 4301-1 and ISO 4306-1 apply to this document. 3.1 Design work task designduty The capacity of the crane or hoisting mechanism determined by the initial design grading throughout the effective working time. 3.2 Design life designlife Estimated allowable work based on initial design requirements of the crane and considering the number of working cycles and the expected load spectrum of the expected operating conditions cycle. 3.3 Design work cycle designworkingperiod; DWP The running time of the design task is reached under the specified actual work tasks. 3.4 Special assessment specialassessment; SA A comprehensive inspection of the crane or hoisting mechanism when the actual work of the crane or hoisting mechanism is close to the design task And assessment. 3.5 Overhaul generaloverhaul;GO In order to extend the safe life of the crane, all modifications and maintenance activities are carried out according to the special assessment (SA).

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 25196-2018_English be delivered?

Answer: Upon your order, we will start to translate GB/T 25196-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 25196-2018_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 25196-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 25196-2018?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 25196-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.