GB/T 23182: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 23182-2025 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Guideline for method development, validation and verification and internal quality control in feed quality and safety detection
| Valid |
GB/T 23182-2025
|
| GB/T 23182-2008 | English | 189 |
Add to Cart
|
3 days [Need to translate]
|
Procedure for veterinary drug and other chemicals determination in feeds
| Valid |
GB/T 23182-2008
|
Basic data | Standard ID | GB/T 23182-2025 (GB/T23182-2025) | | Description (Translated English) | Guideline for method development, validation and verification and internal quality control in feed quality and safety detection | | Sector / Industry | National Standard (Recommended) | | Date of Implementation | 2026-03-01 | | Older Standard (superseded by this standard) | GB/T 23182-2008 | GB/T 23182-2008: Procedure for veterinary drug and other chemicals determination in feeds---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Procedure for veterinary drug and other chemicals determination in feeds
ICS 65.120
B46
National Standards of People's Republic of China
Feed veterinary drugs and other chemicals in testing procedures
Posted 2008-12-31
2009-05-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard by the National Feed Industry Standardization Technical Committee (SAC/TC76) and focal points.
This standard is drafted by. China Agricultural University College of Veterinary Medicine, China Veterinary Drug Control.
The main drafters of this standard. Shen Jianzhong, XU Shi-new, Papers and Quotations Chenglin Li, Bi Ying Chang, Wucong Ming Jiang ocean.
Feed veterinary drugs and other chemicals in testing procedures
1 Scope
This standard specifies the basic requirements for feed drugs, trace chemical additives and chemical contaminants testing (including detection methods indeed
Li, detection performance testing, standard curve, and the detection was confirmed, the results of the calculation and presentation, test report writing, etc.).
This standard applies to the guidance of feed, concentrated feed and premix feed add veterinary drugs, illegal use of drugs and other chemical contaminants
Analysis of test equipment.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 14699.1 feed sampling (GB/T 14699.1-2005, ISO 6497.2002, IDT)
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1
Analysis of unit concentration or amount of analyte units can produce a change in the degree of change in the amount of response.
3.2
Analysis can be detected in a minimum amount of analyte (or minimum concentration) from the sample background signal at a given confidence level, but not necessarily
Accurate quantification.
3.3
Analytical methods meet the quantitative requirements (precision and accuracy) of the premise, can quantitatively measure the lowest amount of analyte in the sample (or lowest
concentration).
3.4
Analyte measured value (result) in the sample to be measured true value or the extent consistent with the agreement between the true value.
3.5
It is known the exact content of the analyte in the sample or added to the percentage of the measured value of blank samples were tested of its true value.
3.6
Consistent analysis of repeated measurements of the same degree of measured values \u200b\u200bbetween the resulting sample.
3.7
Repeatedly measuring standard value deviation (SD) percentage of the arithmetic mean.
|