|
US$499.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 20221-2023: Unplasticized poly(vinyl chloride) (PVC-U) pipes for non-pressure buried drainage and sewerage systems
Status: Valid GB/T 20221: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 20221-2023 | English | 499 |
Add to Cart
|
5 days [Need to translate]
|
Unplasticized poly(vinyl chloride) (PVC-U) pipes for non-pressure buried drainage and sewerage systems
| Valid |
GB/T 20221-2023
|
| GB/T 20221-2006 | English | 679 |
Add to Cart
|
4 days [Need to translate]
|
Unplasticized poly (vinyl chloride) (PVC-U) pipes for non-pressure buried drainage and sewerage systems
| Obsolete |
GB/T 20221-2006
|
PDF similar to GB/T 20221-2023
Basic data | Standard ID | GB/T 20221-2023 (GB/T20221-2023) | | Description (Translated English) | Unplasticized poly(vinyl chloride) (PVC-U) pipes for non-pressure buried drainage and sewerage systems | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G33 | | Classification of International Standard | 83.140.30 | | Word Count Estimation | 26,229 | | Date of Issue | 2023-09-07 | | Date of Implementation | 2024-04-01 | | Older Standard (superseded by this standard) | GB/T 20221-2006 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 20221-2023: Unplasticized poly(vinyl chloride) (PVC-U) pipes for non-pressure buried drainage and sewerage systems
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 83.140.30
CCSG33
National Standards of People's Republic of China
Replace GB/T 20221-2006
Rigid polyvinyl chloride for pressureless buried sewage and drainage
(PVC-U) pipe
(PVC-U),MOD]
Released on 2023-09-07 Implemented on 2024-04-01
State Administration for Market Regulation
Released by the National Standardization Administration Committee
Table of contents
Preface III
1 Scope 1
2 Normative reference documents 1
3 Terms and definitions, symbols, abbreviations2
4 Materials 3
5 Product Category 3
6 Requirement 3
7 Test methods 11
8 Inspection Rules 12
9 Marking, transport and storage14
Appendix A (informative) Comparison of structure numbers between this document and ISO 4435.200315
Appendix B (informative) Technical differences between this document and ISO 4435.2003 and their reasons 16
Reference 20
Foreword
This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents"
Drafting.
This document replaces GB/T 20221-2006 "Rigid polyvinyl chloride (PVC-U) pipes for pressureless buried sewage and drainage" and is consistent with GB/T 20221-
Compared with.2006, in addition to structural adjustments and editorial changes, the main technical changes are as follows.
---The range of the outer diameter of the pipe has been changed, and the outer diameter of the elastic sealing ring connecting pipe has been adjusted from dn110mm to dn1000mm.
dn110mm~dn1600 mm, the outer diameter of adhesive connection pipe is adjusted from dn110mm~dn200mm to
dn110mm~dn450mm (see Chapter 1, Chapter 1 of the.2006 edition);
---Added pressureless sewage and drainage pipes also suitable for pipe corridors (see Chapter 1);
---Added terms, definitions, symbols and abbreviations (see Chapter 3);
--- Added that lead-containing additives should not be used (see 4.1);
---Added requirements for PVC resin (see 4.2);
--- Added requirements for the physical and mechanical properties of the compound (see 4.4);
---Deleted the classification of pipes according to nominal ring stiffness (see 4.2 of the.2006 edition);
---The color of the pipe should be white, green or gray (see 6.1);
---Changed the pipe length diagram (see 6.3.1, 5.3.1 of the.2006 edition);
---Added the average outer diameter and out-of-roundness requirements for pipes from dn1200mm to dn1600mm (see 6.3.2);
---Added the wall thickness requirements for SN12.5 and SN16 pipes (see 6.3.3);
---Changed the size requirements for the elastic sealing ring connection socket (see 6.4.1, 5.3.6.1 of the.2006 edition);
---Changed the size requirements for adhesive connection sockets (see 6.4.2, 5.3.6.2 of the.2006 edition);
---Changed the socket size requirements (see 6.4.3, 5.3.6.1 and 5.3.6.2 of the.2006 edition);
---Added the ring stiffness requirements of SN12.5 and SN16 in the physical and mechanical properties of pipes (see 6.5); deleted the dichloromethane of pipes
Alkane immersion test requirements (see 6.9 of the.2006 edition); the flatness properties, tensile yield stress and elongation at break requirements of the pipe are added.
(see 6.5); added a footnote that the longitudinal retraction rate is only applicable to en≤16mm pipes (see 6.5); added a footnote for dn >
For 630mm pipes, acetone impregnation can be used to replace the footnote of elongation at break (see 6.5);
---Added lead limit requirements for pipes (see 6.6);
---Added provisions for drop weight impact specimens (see 7.6.1);
---Added flat performance test method (see 7.9);
---Added tensile yield stress test method (see 7.10);
--- Added test method for elongation at break (see 7.11);
---Added acetone immersion test method (see 7.12);
--- Added lead limit test method (see 7.13);
---Changed the connection sealing test method for elastic sealing ring connection pipes (see 7.14, 6.10 of the.2006 edition);
---Changed the group batch requirements (see 8.2.1, 7.2 of the.2006 version);
---Added pipe size grouping (see 8.2.2);
---Added stereotype testing (see 8.3);
---Changed the factory inspection requirements (see 8.4, 7.3 of the.2006 edition);
---Changed the type inspection requirements (see 8.5, 7.4 of the.2006 edition);
---Changed the judgment rules (see 8.6, 7.5 of the.2006 version);
---Changed the requirements for marking (see 9.1, 8.1 of the.2006 version);
---Changed the storage requirements (see 9.3, 8.3 of the.2006 edition).
This document is modified to adopt ISO 4435.2003 "Plastic piping systems for unpressurized underground drainage and sewage discharge, unplasticized polyvinyl chloride (PVC-U)".
Compared with ISO 4435.2003, this document has many structural adjustments. Comparison list of structure number changes between the two files
See Appendix A.
Compared with ISO 4435.2003, this document has many technical differences. Vertical single words are used in the outer margins of the clauses involved.
Lines (|) are marked. A list of these technical differences and their causes is provided in Appendix B.
Please note that some content in this document may be subject to patents. The publisher of this document assumes no responsibility for identifying patents.
This document is proposed by China Light Industry Federation.
This document is under the jurisdiction of the National Technical Committee for Standardization of Plastic Products (SAC/TC48).
This document was drafted by. Hebei Quanen High-tech Pipe Industry Co., Ltd., Fujian Liansu New Material Technology Co., Ltd., A.D. Co., Ltd.
Division, Nanya Plastic Industry (Xiamen) Co., Ltd., Fujian Yatong New Material Technology Co., Ltd., Chengdu Chuanlu Plastic Group Co., Ltd., Shan
Dongdonghong Pipe Industry Co., Ltd., Tianjin Junxing Pipe Industry Group Co., Ltd., Gudi Technology Co., Ltd., Zhejiang Zhongcai Pipeline Technology Co., Ltd.
Co., Ltd., Fujian Jiyou Plastic Co., Ltd., and Jiangsu Hemajing Co., Ltd.
The main drafters of this document. Zhu Ruixia, Li Tongyong, Huang Jian, Lin Yanqing, Peng Fudi, Wang Xinghua, Ni Fengyao, Wu Xiaofen, Li Xianmei,
Wang Baiti, Lin Zhanghong, Zhou Minwei, Fan Yingkui.
The distribution of previous versions of this document and the documents it replaces is.
---First published as GB/T 10002.3-1996 in.1996.When revised for the first time in.2006, the standard number was changed to GB/T 20221-
2006;
---This is the second revision.
Rigid polyvinyl chloride for pressureless buried sewage and drainage
(PVC-U) pipe
1 Scope
This document stipulates the extrusion molding of rigid polyvinyl chloride (PVC-U) compounds for use in pressureless buried sewage and drainage applications.
Terms, definitions, symbols and abbreviations, materials, product classifications, colors, appearances, and specifications of vinyl (PVC-U) pipes (hereinafter referred to as "pipes")
requirements such as dimensions and physical and mechanical properties, describes the corresponding test methods, and stipulates inspection rules, marking, transportation and storage.
This document is applicable to the connection of elastic sealing rings with an outer diameter of dn110mm~dn1600mm and an outer diameter of dn110mm~
dn450mm adhesive connected pipes.
This document is applicable to buried pressureless sewage and drainage pipes whose transport medium temperature is not greater than 45°C. In meeting the chemical resistance of the pipe and
Under application conditions such as heat resistance, it is also suitable for pressureless sewage and drainage pipes for industrial or pipe corridors.
This document does not apply to sewage and drainage rigid polyvinyl chloride (PVC-U) pipe systems laid underground in buildings.
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations
For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to
this document.
GB/T 1033.1 Determination of density of plastic non-foam plastics Part 1.Dip method, liquid pycnometer method and titration method
(GB/T 1033.1-2008,ISO 1183-1.2004,IDT)
GB/T 1040.2 Determination of tensile properties of plastics Part 2.Test conditions for molded and extruded plastics (GB/T 1040.2-
2022,ISO 527-2.2012,MOD)
GB/T 1633 Determination of Vicat softening temperature (VST) of thermoplastics (GB/T 1633-2000, idtISO 306.1994)
GB/T 2828.1 Enumeration sampling inspection procedures Part 1.Batch-by-batch inspection sampling plan retrieved by acceptance quality limit (AQL)
(GB/T 2828.1-2012,ISO 2859-1.1999,IDT)
GB/T 2918 Standard environment for conditioning and testing of plastic specimens (GB/T 2918-2018, ISO 291.2008, MOD)
GB/T 5761 Suspension method general-purpose polyvinyl chloride resin
GB/T 6111 Determination of internal pressure resistance of thermoplastic piping systems for fluid transportation (GB/T 6111-2018,
ISO 1167-1.2006,ISO 1167-2.2006,ISO 1167-3.2007,ISO 1167-4.2007,NEQ)
GB/T 6671 Determination of longitudinal shrinkage of thermoplastic pipes (GB/T 6671-2001, eqvISO 2505.1994)
GB/T 8802 Determination of Vicat softening temperature of thermoplastic pipes and fittings (GB/T 8802-2001, eqvISO 2507.
1995)
GB/T 8804.2 Determination of tensile properties of thermoplastic pipes Part 2.Rigid polyvinyl chloride (PVC-U), chlorinated polyvinyl chloride
(PVC-C) and high-impact polyvinyl chloride (PVC-HI) pipes (GB/T 8804.2-2003, ISO 6259-2.1997, IDT)
GB/T 8806 Determination of dimensions of plastic components of plastic piping systems (GB/T 8806-2008, ISO 3126.2005, IDT)
GB/T 9647 Determination of ring stiffness of thermoplastic pipes (GB/T 9647-2015, ISO 9969.2007, IDT)
GB/T 10002.1-2023 Rigid polyvinyl chloride (PVC-U) pipes for water supply
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 20221-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 20221-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 20221-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 20221-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 20221-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 20221-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|