HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 19317.2-2012 English PDF

US$399.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 19317.2-2012: Small craft -- Seacocks and through-hull fittings -- Part 2: Non-metallic
Status: Obsolete
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 19317.2-2012English399 Add to Cart 3 days [Need to translate] Small craft -- Seacocks and through-hull fittings -- Part 2: Non-metallic Obsolete GB/T 19317.2-2012

PDF similar to GB/T 19317.2-2012


Standard similar to GB/T 19317.2-2012

GB/T 18572   GB/T 19316   GB/T 19315   GB/T 19310   

Basic data

Standard ID GB/T 19317.2-2012 (GB/T19317.2-2012)
Description (Translated English) Small craft -- Seacocks and through-hull fittings -- Part 2: Non-metallic
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard U37
Classification of International Standard 47.080
Word Count Estimation 10,171
Quoted Standard GB/T 19916-2005; ISO 7-1-1994; ISO 178-2001; ISO 180-2000; ISO 228-1-2000; ISO 527.1; ISO 527.2; ISO 527.3; ISO 527.4; ISO 527.5
Adopted Standard ISO 9093-2-2002, IDT
Regulation (derived from) National Standards Bulletin No. 41 of 2012
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the length of the hull of the boat is not more than 24 m through the use of non-metallic hull attachments and/or assembly of the manufacture and installation requirements, including through the hull attachment, the sea cocks, hose

GB/T 19317.2-2012: Small craft -- Seacocks and through-hull fittings -- Part 2: Non-metallic

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS47.080 U37 National Standards of People's Republic of China GB/T 19317.2-2012/ISO 9093-2.2002 Boat through the sea cocks and hull attachments Part 2. non-metallic parts Smalcraft-Seacocksandthrough-hulfittings-Part 2. Non-metalic (ISO 9093-2.2002, IDT) Issued on. 2012-12-31 2013-07-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

Rules in this section in accordance with GB/T 1.1-2009 given draft. This section uses the translation method is equivalent to using ISO 9093-2. section 2002 "Annex dinghy sea cocks and through hull 2. Non - metallic parts". This part is proposed by the China State Shipbuilding Corporation. This part of the National Standardization Technical Committee boat (SAC/TC241) centralized. This section drafted by. China Shipbuilding Technology and Economy Research Institute. The main drafters of this section. Wang Jun, the old Yi Jia, Zhao Hua. GB/T 19317.2-2012/ISO 9093-2.2002 Boat through the sea cocks and hull attachments Part 2. non-metallic parts

1 Scope

This section GB/T 19317 requirements on a non-metallic hull length of not more than 24m boat hull through the use of accessories and/or Assembly manufacturing and installation requirements, including through hull fitting, sea cock hose attachment and/or the drain plug and its accompanying components. This section GB/T 19317 does not apply to accessories and engine exhaust through the hull of the navigating bridge connections.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 19916-2005 boat Main data (ISO 8666.2002, IDT) ISO 7-1. compression type fittings Threaded Part 11994 thread made of. dimensions, tolerances and marking (Pipethreadwhere pressure-tightjointsaremadeonthethread-Part 1. Dimensions, tolerancesanddesignation) ISO 178.2001 Plastics Determination of flexural properties (Plastics-Determinationofflexuralproperties) ISO 180.2000 Determination of the impact strength of plastics (Plastics-Determinationofimpactstrength) ISO 228-1.2000 non-compression type fittings Threaded Thread made Part 1. dimensions, tolerances and marking (Pipethreadwhere pressure-tightjointsarenotmadeonthethread-Part 1. Dimensions, tolerancesanddesignation) ISO 527 (all parts), Plastics Determination of tensile properties (Plastics-Determinationoftensileproperties)

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 Through hull attachment through-hulfitting Designed to allow liquid or gas with suspended solids by Annex hull. 3.2 Sea cock seacock Mounted directly on the hull or through hull attachment to prevent ingress of water off the device. 3.3 Hose attachment hosefitting For attachment or through the hull of the sea cock hose connected to an associated member. 3.4 Drain plug drainplug By a plug and associated attachments through hull consisting drain plug. 3.5 ACCESSIBLE readilyaccessible Without removing any hull structure or the use of any tools, or to move in a predetermined stacking portion for storing portable devices (such as cabinets, Drawer or shelf) any portable device that can reach use, inspection or maintenance capability. GB/T 19317.2-2012/ISO 9093-2.2002

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 19317.2-2012_English be delivered?

Answer: Upon your order, we will start to translate GB/T 19317.2-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 19317.2-2012_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 19317.2-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.