|
US$199.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 18024.1-2024: Graphical symbols for the technical documentation of coal mine machinery - Part 1: General principles
Status: Valid GB/T 18024.1: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 18024.1-2024 | English | 199 |
Add to Cart
|
3 days [Need to translate]
|
Graphical symbols for the technical documentation of coal mine machinery - Part 1: General principles
| Valid |
GB/T 18024.1-2024
|
| GB/T 18024.1-2009 | English | 139 |
Add to Cart
|
3 days [Need to translate]
|
Graphical symbols for the technical documentation of coal mine machinery -- Part 1: General principles
| Valid |
GB/T 18024.1-2009
|
| GB/T 18024.1-2000 | English | 439 |
Add to Cart
|
4 days [Need to translate]
|
Graphical symbols for use in technical documentation of coal mine machinery-General principles
| Obsolete |
GB/T 18024.1-2000
|
PDF similar to GB/T 18024.1-2024
Basic data | Standard ID | GB/T 18024.1-2024 (GB/T18024.1-2024) | | Description (Translated English) | Graphical symbols for the technical documentation of coal mine machinery - Part 1: General principles | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | D04 | | Classification of International Standard | 01.080.20 | | Word Count Estimation | 10,167 | | Date of Issue | 2024-09-29 | | Date of Implementation | 2025-04-01 | | Older Standard (superseded by this standard) | GB/T 18024.1-2009 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 18024.1-2024: Graphical symbols for the technical documentation of coal mine machinery - Part 1: General principles
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 01.080.20
CCSD04
National Standard of the People's Republic of China
Replaces GB/T 18024.1-2009
Graphic symbols for coal mining machinery technical documents
Part 1.General
Part 1.General principles
2025-04-01 Implementation
State Administration for Market Regulation
The National Standardization Administration issued
Table of Contents
Preface III
Introduction IV
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Design Principles 1
5 Rules of Use 2
6 Basic graphic symbols for equipment 2
7 Infographics Symbols 3
References 4
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting.
This document is part 1 of GB/T 18024 Graphical symbols for coal mining machinery technical documents. GB/T 18024 has been published as follows.
Lower part.
--- Part 1.General;
--- Part 2.Graphic symbols for supports and pillars at coal mining faces;
--- Part 3.Graphic symbols for mining machinery;
--- Part 4.Graphic symbols for underground transport machinery;
--- Part 5.Graphic symbols for lifting and ground production machinery;
--- Part 6.Graphic symbols for open-pit mining machinery;
--- Part 7.Graphical symbols for compressors, ventilators and pumps.
This document replaces GB/T 18024.1-2009 "Graphical symbols for coal mining machinery technical documents Part 1.General principles".
Compared with GB/T 18024.1-2009, in addition to structural adjustments and editorial changes, the main technical changes are as follows.
a) The wording of the “Design Principles” section has been changed (see Chapter 4, Chapter 3 of the.2009 edition);
b) Changed the title of "Rules of Use" and some of the content (see Chapter 5, Chapter 4 of the.2009 edition);
c) Added "6 Basic graphic symbols for equipment" (see Chapter 6);
d) Added “7 Information Graphics Symbols” (see Chapter 7).
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document is proposed and coordinated by the China Coal Industry Association.
This document was drafted by. Xi'an University of Science and Technology, China Coal Industry Association.
The main drafters of this document are. Mu Qi, Sang Yaqun, Yang Yang, Li Zhanli, Wei Chaowen and Ma Zhongji.
The previous versions of this document and the documents it replaces are as follows.
---First published in.2000 as GB/T 18024.1-2000;
---First revised in.2009 to GB/T 18024.1-2009;
---This is the second revision.
Introduction
In order to improve the standardization level of equipment graphic symbols in coal mine machinery technical documents, ensure the integrity of equipment graphic symbols in design, production, scientific research, teaching and other links.
In order to ensure the accurate transmission and sharing of information, GB/T 18024 "Graphical Symbols for Coal Mine Machinery Technical Documents" was specially formulated. GB/T 18024 consists of 7 parts
constitute.
--- Part 1.General. Establish the design principles and usage rules of graphic symbols for coal mining machinery technical documents, give the basic diagram of the equipment
Instructions for drawing graphic symbols and basic information symbols.
--- Part 2.Graphic symbols for supports and pillars at coal mining working faces. Specifies the graphic symbols for supports and pillars at coal mining working faces and their use
rule.
--- Part 3.Graphic symbols for mining machinery. Specifies the graphic symbols for mining machinery and their use rules.
--- Part 4.Graphic symbols for underground transport machinery. Specifies the graphic symbols for underground transport machinery and their use rules.
--- Part 5.Graphic symbols for lifting and ground production machinery. Specifies the graphic symbols for lifting and ground production machinery and their use rules.
--- Part 6.Graphic symbols for open-pit mining machinery. Specifies the graphic symbols for open-pit mining machinery and their use rules.
--- Part 7.Graphical symbols for compressors, ventilators and pumps. Specifies the graphic symbols for compressors, ventilators and pumps and their use rules.
GB/T 18024 has released two versions. GB/T 18024-2000 and GB/T 18024-2009.GB/T 18024-2009
It was drafted and formulated based on GB/T 1.1-2009 standard, which is more than ten years old.
With the upgrading of equipment, many new technologies and equipment have been widely used in coal mines, and some old equipment has been eliminated.
GB/T 18024 is based on the standard GB/T 1.1-2009, which has been revised to GB/T 1.1-2020.In view of this, it is necessary to revise the
GB/T 18024 has been improved to adapt to the new changes in relevant standards and the requirements of the coal industry's development over time, to ensure the timeliness and applicability of the standard.
Usability.
Graphic symbols for coal mining machinery technical documents
Part 1.General
1 Scope
This document establishes the design principles and usage rules for graphic symbols (hereinafter referred to as graphic symbols) used in coal mining machinery technical documents;
Instructions for drawing basic graphic symbols for equipment and information graphic symbols used in coal mining machinery technical documents.
This document is suitable for drawing schematic diagrams and simplified diagrams of coal mine machinery and equipment (such as layout of mining area tunnels and machinery equipment, lifting system diagrams, etc.)
intention, underground and ground production system flow charts and other system diagrams, layout diagrams, schematic diagrams, etc.) for coal mine design, production, scientific research, teaching,
Books, product manuals, management and other technical documents. Technical documents of similar machinery in other industries can be used for reference.
2 Normative references
The contents of the following documents constitute essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document.
GB/T 16900 General rules for the representation of graphic symbols
GB/T 16901.1 Rules for the representation of graphic symbols in technical documents Part 1.Basic rules
GB/T 16901.2 Rules for the representation of graphic symbols in technical documents Part 2.Graphic symbols (including graphic symbols in the reference symbol library)
Symbols) computer electronic file format specifications and exchange requirements
GB/T 17450 Technical drawing lines
GB/T 18024.2 Graphical symbols for coal mining machinery technical documents Part 2.Graphical symbols for supports and pillars on coal mining working faces
GB/T 18024.3 Graphical symbols for coal mining machinery technical documents Part 3.Graphical symbols for mining machinery
GB/T 18024.4 Graphical symbols for coal mining machinery technical documents Part 4.Graphical symbols for underground transport machinery
GB/T 18024.5 Graphical symbols for coal mining machinery technical documents Part 5.Graphical symbols for lifting and surface production machinery
GB/T 18024.6 Graphical symbols for coal mining machinery technical documents Part 6.Graphical symbols for open-pit mining machinery
GB/T 18024.7 Graphical symbols for coal mining machinery technical documents Part 7.Graphical symbols for compressors, ventilators and pumps
GB/T 20001.2 Rules for writing standards Part 2.Symbol standards
3 Terms and definitions
There are no terms or definitions that require definition in this document.
4 Design Principles
4.1 The design of graphic symbols shall comply with the requirements of GB/T 16900, GB/T 16901.1, GB/T 16901.2 and GB/T 20001.2.
4.2 Graphic symbols should be based on the basic shape and structural characteristics of the object being expressed, and should be clear and concise, easy to draw, easy to understand and remember, easy to distinguish,
Designed with unique principles.
4.3 Graphic symbols are generally drawn from a certain direction of the object being expressed. Different graphic symbols can also be drawn according to different views or functional requirements.
but should be given different names.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 18024.1-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 18024.1-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 18024.1-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 18024.1-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 18024.1-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 18024.1-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|