|
US$439.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 17047-2008: Concrete products machinery -- Terminology
Status: Valid GB/T 17047: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 17047-2008 | English | 439 |
Add to Cart
|
4 days [Need to translate]
|
Concrete products machinery -- Terminology
| Valid |
GB/T 17047-2008
|
| GB/T 17047-1997 | English | 519 |
Add to Cart
|
4 days [Need to translate]
|
Concrete products machinery--Terminology
| Obsolete |
GB/T 17047-1997
|
PDF similar to GB/T 17047-2008
Basic data | Standard ID | GB/T 17047-2008 (GB/T17047-2008) | | Description (Translated English) | Concrete products machinery -- Terminology | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | P95 | | Classification of International Standard | 01.040.91 | | Word Count Estimation | 19,162 | | Date of Issue | 2008-07-27 | | Date of Implementation | 2009-02-01 | | Older Standard (superseded by this standard) | GB/T 17047-1997 | | Quoted Standard | GB/T 7920.4-2005 | | Regulation (derived from) | National Standard Approval Announcement 2008 No.12 (Total No.125) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the small concrete block, molding process, such as concrete hollow board members adopted a variety of mechanical terms. This standard applies to concrete products machinery. | GB/T 17047-2008: Concrete products machinery -- Terminology---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Concrete products machinery. Terminology
ICS 01.040.91
P95
National Standards of People's Republic of China
Replacing GB/T 17047-1997
Concrete products machinery - Terminology
Posted 2008-07-27
2009-02-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 concrete block production equipment 1
4 small block making machine 3
5 concrete hollow extrusion molding machine 4
6 concrete hollow slab pushing machine 5
7 concrete hollow die machine 6
8 extruder pushing machine generic term 6
References 8
Chinese index 9
English 11 Index
Foreword
This standard replaces GB/T 17047-1997 "concrete products machinery - Terminology."
The main changes compared to "Concrete products machinery - Terminology" This standard and GB/T 17047-1997 as follows.
--- Removed concrete production equipment in a simple style block production equipment and concrete block making machine into a multi-layer classification
Type machine;
--- The "concrete block making machine" to "small block making machine";
--- Increased vibration mode type block making machine and Taiwan vibration type block making machine concrete block machine classification;
--- Adjust other parts of the definition of the term;
--- Fixed a standard part of the original English definitions.
The standard proposed by China Machinery Industry Federation.
This standard by the national construction machinery and construction equipment Standardization Technical Committee (SAC/TC328) centralized.
This standard is drafted by. Beijing Institute of Construction Mechanization.
Participated in the drafting of this standard. Xian Silver Horse Industrial Development Co., Ltd., Quanzhou Hongyi Machinery Manufacturing Co., Ltd., Quanzhou peaks machine
Mechanical Manufacturing Co., Ltd., Tianjin Yinfeng Machine Equipment Co., Ltd., Xi'an East Fuxing Machinery Co., Ltd., Sichuan Mianzhu Taiji machinery have
Ltd., Yangzhou Weiao Heavy Machinery Co., Ltd. Langfang KABB Construction Machinery Co., Ltd., China Construction Machinery Association of Concrete
Products machinery branch.
The main drafters of this standard. Wang Ping, Yao Jinke, Cao Yinghui, Li Yang water, Jinshan Xu, Zhao Hu students, Zhao Xiangshan, Zhang Jifu, while Lijun,
An Zhifang, Tang Qi, Meng bamboo.
This standard replaces the standards previously issued as follows.
--- GB/T 17047-1997.
Concrete products machinery - Terminology
1 Scope
This standard defines the molding process of small concrete blocks, concrete hollow member, etc. used in various mechanical terms.
This standard applies to concrete products machinery.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 7920.4-2005 concrete machinery terminology
3 concrete block production equipment
Concrete mix was prepared for the production of small concrete blocks, block making, block and pallet transport, maintenance, transportation, palletizing device
Opposing assembly.
3.1 Classification
3.1.1
After starting the manual intervention is no longer necessary to control their own block production cycle of equipment.
3.1.2
After starting the need for manual intervention (manually) to control a single loop or block production equipment more than one cycle.
3.1.3
Manual operation control block production process equipment.
3.1.4
The block into the framework to facilitate handling of the whole into the curing kiln conservation block production equipment.
3.1.5
Block without a handling frame into conservation kiln conservation block production equipment.
3.1.6
Block transfer and conservation of equipment in the form of veneer.
3.2 part
3.2.1
Will be raised or lowered to block multi-fork kiln car loading and unloading mechanism.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 17047-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 17047-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 17047-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 17047-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 17047-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 17047-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|