HOME   Cart(2)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 12001.1-2008 English PDF

US$134.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 12001.1-2008: Plastics -- Unplasticized poly (vinyl chloride) (PVC-U) moulding and extruded materials -- Part 1: Designation system and basis for specifications
Status: Valid

GB/T 12001.1: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 12001.1-2008English134 Add to Cart 3 days [Need to translate] Plastics -- Unplasticized poly (vinyl chloride) (PVC-U) moulding and extruded materials -- Part 1: Designation system and basis for specifications Valid GB/T 12001.1-2008
GB/T 12001.1-1989English199 Add to Cart 2 days [Need to translate] Moulding materials for windows of unplasticized polyvinyl chloride--Part 1: Designation Obsolete GB/T 12001.1-1989

PDF similar to GB/T 12001.1-2008


Standard similar to GB/T 12001.1-2008

GB/T 12000   GB/T 12008.5   GB/T 12008.6   GB/T 12008.7   GB/T 12009.2   GB/T 12001.2   

Basic data

Standard ID GB/T 12001.1-2008 (GB/T12001.1-2008)
Description (Translated English) Plastics -- Unplasticized poly (vinyl chloride) (PVC-U) moulding and extruded materials -- Part 1: Designation system and basis for specifications
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard G31
Classification of International Standard 83.080.01
Word Count Estimation 7,775
Date of Issue 2008-09-18
Date of Implementation 2009-05-01
Older Standard (superseded by this standard) GB/T 12001.1-1989
Quoted Standard GB/T 1844.1-2008; GB/T 1200-2008
Adopted Standard ISO 1163-1-1995, IDT
Regulation (derived from) National Standard Approval Announcement 2008 No.16 (Total No.129)
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies as unplasticized polyvinyl chloride (PVC-U) of thermoplastic material classification based naming system. Different types of unplasticized polyvinyl chloride thermoplastic material used to distinguish between a classification system. Important properties, , scope of the system to apply the following characteristics and performance values ??for recommended use and (or) method of processing additives, coloring agents, fillers and reinforcing materials and other information as the foundation. a) Vicat softening temperature, b) Charpy notched impact strength, c) elastic modulus. This section applies to all plasticized vinyl chloride homopolymer are not, chloride content of not less than 50% of unplasticized copolymer mixture.

GB/T 12001.1-2008: Plastics -- Unplasticized poly (vinyl chloride) (PVC-U) moulding and extruded materials -- Part 1: Designation system and basis for specifications


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
. Plastics Unplasticized poly (vinyl chloride) (PVC-U) moulding and extruded materials Part 1. Designation system and basis for specifications ICS 83.080.01 G31 National Standards of People's Republic of China GB/T 12001.1-2008/ISO 1163-1.1995 Replacing GB/T 12001.1-1989 Unplasticized PVC plastic molding and extrusion materials Part 1. Designation system and basis (ISO 1163-1.1995, IDT) Posted 2008-09-18 2009-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 12001 "unplasticized PVC plastic molding and extrusion materials" is divided into two parts. --- Part 1. Designation system and basis; --- Part 2. Preparation and properties of the specimen was measured. This section GB/T 12001 Part 1, this part identical with ISO 1163-1.1995 "Plastics unplasticized PVC (PUC-U) molding and extrusion materials - Part 1. Designation system and basis for specifications "(in English). This section is equivalent translation ISO 1163-1.1995. For ease of use, this section made the following editorial changes. a) Remove the ISO 1163-1.1995 Foreword; b) "This part of ISO 1163" to "GB/T 12001 this part" or "this part"; c) For ISO 1163-1.1995 international standard references, references identical with its revised national standards. This Part replaces GB/T 12001.1-1989 "unplasticized PVC window Moulding - Part 1. Designation" This section compared with the GB/T 12001.1-1989 The main changes are as follows. a) the name was changed to "unplasticized PVC plastic molding and extrusion materials - Part 1. Designation system and basis"; b) character in group 2 adds some code; c) modify the range of values \u200b\u200bin Table 2 of the symbols and their representatives. This part is proposed by the China Petroleum and Chemical Industry Association. This part of the National Standardization Technical Committee of plastic products and plastic resins General Methods Chapter (SAC/TC15/SC4) centralized. This part mainly drafted by. Sinopec hospital north of the National Chemical Building Materials Testing Center (Materials Testing section). Participated in the drafting of this section. Country of synthetic resin Quality Supervision and Inspection Center, Sinopec Yanshan Petrochemical resin. The main drafters of this section. Hu Xiaoyi, Li Shengde, Sun Quan, Wang Jiandong, Chen vows. This part of the standard replaces the previous editions as. GB/T 12001.1-1989. GB/T 12001.1-2008/ISO 1163-1.1995 Unplasticized PVC plastic molding and extrusion materials Part 1. Designation system and basis

1 Scope

1.1 GB/T 12001 in the provisions of this section as unplasticized polyvinyl chloride (PVC-U) of thermoplastic material classification based naming system. 1.2 Different types of unplasticized polyvinyl chloride thermoplastic material distinction in a classification system. The system applies the following characteristic Values \u200b\u200bcan range as well as on recommended use and (or) method of processing, important properties, additives, colorants, fillers and reinforcing materials and other information basis. a) Vicat softening temperature; b) Charpy notched impact strength; c) modulus of elasticity. 1.3 section applies to all plasticized vinyl chloride are not homopolymers, vinyl chloride content of not less than 50% unplasticized copolymer mixture. At the same time one and more content polymers are also suitable for mixtures of CPVC and not less than the above-mentioned 50% of the mixture. This section applies to a conventional powdery, granular particles or broken, or not modified by colorants, additives, fillers, such as modified materials. This section does not apply to foam. 1.4 part does not necessarily mean naming the same material with the same properties. This section does not provide instructions for use and special materials (Or) processing methods required for the project character, performance, character or character processing conditions. If necessary, according to GB/T 12001 Test methods specified in Part 2 to determine these additional properties. 1.5 In order to illustrate some unplasticized PVC material for special purposes or in order to ensure process reproducibility, can give in the fifth group of characters The additional requirements (see Chapter 3 introduces the paragraph).

2 Normative references

The following documents contain provisions which, through reference GB/T 12001 in this section constitute provisions of this section. For dated references, All subsequent amendments (excluding corrections) or revisions do not apply to this section, however, encourage an agreement under this section Parties to study the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 1844.1-2008 Plastics - Symbols and Abbreviations - Part 1. Basic polymers and their special characteristics (ISO 1043-1. 1996, IDT) Preparation of test specimens and determination of properties. GB/T 12001.2-2008 plastic PVC plastic molding and extrusion materials - Part 2 does not increase (ISO 1163-2.1995, IDT)

3 naming and specification system

Unplasticized PVC naming and classification system based on the following standard mode. name Group Description (optional) Characteristics of the project team National standard No group Independent project team Group 1 Group 2 character character character character Group 3 Group 4 Group 5 characters Name contains labeled "thermoplastic" group and an optional description feature set, feature group comprising the number of national standards groups and independent project team. GB/T 12001.1-2008/ISO 1163-1.1995

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 12001.1-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 12001.1-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 12001.1-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 12001.1-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 12001.1-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 12001.1-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.