|
US$294.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 10066.31-2007: Test methods for electro-heat installations -- Part 31: High-frequency induction heating installation -- Test methods for the determination of power output of the generator
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 10066.31-2007 | English | 294 |
Add to Cart
|
3 days [Need to translate]
|
Test methods for electro-heat installations -- Part 31: High-frequency induction heating installation -- Test methods for the determination of power output of the generator
| Valid |
GB/T 10066.31-2007
|
PDF similar to GB/T 10066.31-2007
Basic data | Standard ID | GB/T 10066.31-2007 (GB/T10066.31-2007) | | Description (Translated English) | Test methods for electro-heat installations -- Part 31: High-frequency induction heating installation -- Test methods for the determination of power output of the generator | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K60 | | Classification of International Standard | 25.180.10 | | Word Count Estimation | 15,152 | | Date of Issue | 2007-12-03 | | Date of Implementation | 2008-05-20 | | Adopted Standard | IEC 61922-2002, IDT | | Regulation (derived from) | China Announcement of Newly Approved National Standards No. 12 of 2007 (No. 112 overall) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the high-frequency induction heating device generator output power measurement method. This section applies to a high-frequency generator and sensors as well as holding the charge necessary machinery (such as hardening machine) consisting of a frequency range up to 300 MHz, power is equal to and greater than 500 w heating (such as surface (or partial) quenched and diathermy, welding, brazing, melting, forging, refining semiconductor region) of the RF or high-frequency induction heating industrial devices. Load can be described in this section for electromagnetic compatibility assessment of compliance with CISPR11. | GB/T 10066.31-2007: Test methods for electro-heat installations -- Part 31: High-frequency induction heating installation -- Test methods for the determination of power output of the generator
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test methods for electroheat installation. Part 31. High-frequency induction heating installation. Tip methods for the determination of power output of the generator
ICS 25.180.10
K60
National Standards of People's Republic of China
GB/T 10066.31-2007/IEC 61922..2002
Test methods for electric devices
Part 31. high frequency induction heating device generator
Determination of output power
(IEC 61922..2002, IDT)
2007-12-03 released
2008-05-20 Implementation
General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
China National Standardization Administration released
Directory
Foreword Ⅲ
1 Scope and purpose 1
2 Normative references 1
3 Terms and definitions 1
4 test load 2
4.1 cone calorimeter load 2
4.2 lamp load temperature method 2
4.3 matched resistive load 2
5 test requirements 2
5.1 cone calorimeter load 2
5.2 lamp load temperature method 3
5.3 matching resistive load 4
Appendix A (informative) test inductor inductance calculation 8
Figure 1, the definition of output power 4
Figure 2 Example calorimeter 5
Figure 3 power measurement water resistance example 6
Figure 4 single-turn test sensor example 6
Figure 5 adjustable inductor example 7
Figure 6 lamp load temperature measurement circuit example 7
Figure A. 1 cone calorimeter with the main test sensor size 8
GB/T 10066.31-2007/IEC 61922..2002
Foreword
GB/T 10066 "test methods for electric devices" There are 13 parts.
--- Part 1. General part;
--- Part 2. Interested induction furnace;
--- Part 3. Heartless induction furnace;
--- Part 31. Determination of high frequency induction heating device generator output;
--- Part 4. Indirect resistance furnace;
--- Part 5. Plasma devices (GB/T 13535-1992 "plasma apparatus for electric heating test method");
--- Part 6. Determination of industrial microwave heating device output power (GB/T 18662-2002 "industrial microwave heating equipment
Determination of output power ");
--- Part 7. electric heating device with electron gun;
--- Part 8. ESR furnace;
--- Part 9. high frequency dielectric heating device output power measurement method (GB/T 14809-2000 "high frequency dielectric heating equipment
Out of power measurement method ");
--- Part 10. Direct electric arc furnace;
--- Part 11. Submerged arc furnace;
--- Part 12. Infrared heating device.
Note. The test method for some existing electric devices is not subject to segment numbers (as shown in brackets) and will be changed to the segment numbers as specified above when amended.
This section GB/T 10066 Part 31 should be used in conjunction with the first part.
This section identical with IEC 61922..2002 "high-frequency induction heating device --- Determination of the generator output power test method"
In use, for IEC 61922..2002, this section also made the following editorial changes.
--- "This Standard" be replaced by "this section";
--- Remove the foreword of the international standard;
Part. Determination of high frequency induction heating device generator output power ", the English name corresponding modification;
--- "The main purpose of this standard is to provide test methods for the determination of the output power of industrial high-frequency induction heating power supply." Replaced by "This section
Provides high-frequency induction heating device generator output power measurement method ";
--- "This international standard applies to the industrial use of heating (such as surface hardening, welding, brazing, melting, forging, semiconductor refining, etc.)
Frequency or high-frequency induction heating device. This standard relates to high-frequency generators and sensors and the necessary mechanical equipment holding the charge
(Such as quenching machine), the frequency up to 300MHz, the power is equal to and greater than 500W high-frequency induction heating device. Two
Paragraph read as follows. "This section applies to the high-frequency generators and sensors and the necessary mechanical equipment holding the charge (such as quenching machine)
Composition, the frequency range up to 300MHz, the power is equal to and greater than 500W heating (such as surface (or local) quenching and through
Thermal, soldering, brazing, melting, forging, refining of the semiconductor area, etc.) for industrial RF or HF induction heating. ";
--- "2 reference standard" to "2 normative references";
--- "The following referenced documents are indispensable for the use of this document. For dated references, only the edition cited is applicable.
For undated references, the latest version of the referenced document (including all amendments) applies. "Replace" with the following document
This section through the reference and become the provisions of this section. For dated references, all subsequent amendments (no
Including errata content) or revisions do not apply to this section, however, encouraged by the parties to reach an agreement under this section is
No The latest versions of these files are available. For undated references, the latest version applies to this section ";
GB/T 10066.31-2007/IEC 61922..2002
--- "3 definition" title changed to "3 terms and definitions."
Appendix A of this section is informative appendix.
This part is proposed by China Electrical Equipment Industry Association.
This part of the National Industrial Heating Equipment Standardization Technical Committee.
This section is drafted. Xi'an Electric Furnace Institute.
The main drafters of this section. Liu Xiping.
GB/T 10066.31-2007/IEC 61922..2002
Test methods for electric devices
Part 31. high frequency induction heating device generator
Determination of output power
1 Scope and purpose
GB/T 10066 provisions of this part of the high-frequency induction heating device generator output power measurement method.
This section applies to the high-frequency generator and inductor and hold the charge required by the mechanical equipment (such as quenching machine) composition, the frequency
Range up to 300MHz, power is equal to and greater than 500W Heating (such as surface (or local) quenching and diathermy, welding, brazing, melting, forging
Manufacturing, semiconductor refining, etc.) industrial RF or high frequency induction heating device.
The load described in this section can be used for EMC compliance CISPR11 assessment.
This section relates to the power generator rated at continuous operation under the conditions specified by the manufacturer.
The method for measuring the output power of a generator running in a short-pulse cycle (for example, using an adiabatic calorimeter)
thinking.
Care must be taken when using electronic systems for power measurements because their accuracy can not be guaranteed, especially at higher frequencies. These ones
The instrument requires a large current transformer and a voltage transformer when measuring the output power. These transformers also have errors at higher frequencies. These measurements
Quantitative methods require specialized knowledge to be applied correctly and are therefore not described in detail in this section.
2 Normative references
The following documents contain provisions which, through reference in this part of GB/T 10066, become the provisions of this section. For dated references,
All subsequent amendments (not including errata content) or revisions do not apply to this section, however, to encourage the agreement reached under this section
The parties study whether the latest versions of these documents are available. For undated references, the latest version applies to this section.
GB/T 2900 Electrotechnical terminology Industrial electric heating device (GB/T 2900.23-1995, neqIEC 60050 (841). 1983)
GB 5959.1-2005 Safety of electric heating equipment - Part 1. General requirements (IEC 60519-1..2003, IDT)
GB 5959.3 electric apparatus - Safety Part 3. Particular requirements for induction and conduction heating apparatus and induction melting apparatus
(GB 5959.3-1988, IEC 60519-3..1998, MOD)
GB/T 14809-2000 high-frequency dielectric heating device output power measurement method (eqv IEC 61308..1994)
GB 4824-2004 Industrial, scientific and medical (ISM) radio frequency electromagnetic disturbance characteristics of measuring methods and limits (IEC /CISPR11.
2003, IDT)
3 Terms and definitions
The GB/T 2900, GB 5959.1-2005 and GB 5959.3 established and the following terms and definitions apply to this section.
3.1
At the generator power output, enter the power of the test load specified in this standard.
Note. This definition is explained by Figure 1. To the left of the graph is the generator and bounded by its two output terminals. The load is connected to these two output terminals. Outside the generator cabinet
All the power shown is defined as the generator's output power. It includes power consumed in inductors, power leads and calorimeters.
3.2
For the measurement of high-frequency power by the water-cooled components of the device, the flow of cooling water is controlled, the temperature difference between incoming and outgoing water is monitored.
Note. The water-cooled parts made of steel or other conductive materials, high-frequency current is induced in it.
GB/T 10066.31-2007/IEC 61922..2002
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 10066.31-2007_English be delivered?Answer: Upon your order, we will start to translate GB/T 10066.31-2007_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 10066.31-2007_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 10066.31-2007_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|