HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 554-2023 English PDF

US$399.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 554-2023: Ships and marine technology -- Ship' s mooring and towing fittings -- Welded steel bollards for sea-going vessels
Status: Valid

GB/T 554: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 554-2023English399 Add to Cart 4 days [Need to translate] Ships and marine technology -- Ship' s mooring and towing fittings -- Welded steel bollards for sea-going vessels Valid GB/T 554-2023
GB/T 554-2008English639 Add to Cart 4 days [Need to translate] Bollards Obsolete GB/T 554-2008
GB/T 554-1996English479 Add to Cart 4 days [Need to translate] Mooring bitts Obsolete GB/T 554-1996
GB 554-1983English479 Add to Cart 4 days [Need to translate] Mooring bitts Obsolete GB 554-1983

Standard similar to GB/T 554-2023

GB/T 549   GB/T 546   

Basic data

Standard ID GB/T 554-2023 (GB/T554-2023)
Description (Translated English) Ships and marine technology -- Ship' s mooring and towing fittings -- Welded steel bollards for sea-going vessels
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard U21
Classification of International Standard 47.020.50
Word Count Estimation 19,114
Date of Issue 2023-05-23
Date of Implementation 2023-12-01
Older Standard (superseded by this standard) GB/T 554-2008
Issuing agency(ies) State Administration for Market Regulation, China National Standardization Administration

GB/T 554-2023: Ships and marine technology -- Ship' s mooring and towing fittings -- Welded steel bollards for sea-going vessels


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 47:020:50 CCSU21 National Standards of People's Republic of China Replace GB/T 554-2008 Ships and offshore technology Ship mooring and towing equipment Sea-going steel welded cable piles (ISO 13795:2020,NEQ) Released on 2023-05-23 2023-12-01 implementation State Administration for Market Regulation Released by the National Standardization Management Committee

table of contents

Preface I 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Classification and labeling 1 5 requirements 7 6 Test method 9 7 Inspection rules 10 8 Labeling, transportation and storage 11 Appendix A (Normative) Strength assessment of steel welded cable piles 12 Reference 15

foreword

This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents" drafting: This document replaces GB/T 554-2008 "Cable Bollard": Compared with GB/T 554-2008, except for structural adjustment and editorial changes, the main The technical changes are as follows: --- Increase the terms and definitions of "safe working load" and "towing safe working load" (see 3:1, 3:2); ---Delete the original standard B-type embedded cable pile, D-type double "ten" screw-fixed cable pile and DH type double "ten" welding Connect fixed cable piles (see Table 1, Figure 2, Table 3, Figure 4, Figure 5, Table 5 of the:2008 edition); ---Change the standard type A "ordinary cable pile" to type A "compact base cable pile", change the standard type C "simple cable pile" to type B "Wide base cable pile", change the nominal diameter range and schematic diagram of the cable pile (see Table 1, Table 1 of the:2008 edition); ---Change the structure type and basic dimensions of type A "compact base with cable pile" and type B "wide base with cable pile" (see Figure 1, Table 2, Table 3, Figure 2, Table 4, Table 5, Figure 1, Table 2, Figure 2, Table 3 of the:2008 edition); --- Increase the type and size of the cable pile baffle (see Figure 1, Table 2, Table 3, Figure 2, Table 4, Table 5); ---Delete the material of sealing plate, horizontal pipe and reinforcement plate, and increase the material of eye ring and baffle (see Table 6, Table 6 of the:2008 edition); --- Increase the model representation method (see 4:2); ---Delete the type and size of the baffle installed with bollards (see 4:2:3 of the:2008 edition); ---Change the specifications of seamless steel pipes for piles with cable piles (see Table 7, Table 7 of the:2008 edition); --- Increase the material requirements of "Materials can be put into production after passing the inspection" (see 5:1:1), delete the material test method (see the:2008 edition 5:1); ---Change the requirements for stainless steel cladding of cable piles (see 5:1:2, 4:1:2 of the:2008 edition); --- Add "SWL or TOW mark" requirements and inspection methods (see 5:7, 6:6); ---Change "Appendix A (Normative) Design calculation load state and allowable stress of cable piles" to "Appendix A (Normative) Steel welded strip Cable bollard strength assessment" (see Appendix A, Appendix A of the:2008 edition): This document refers to ISO 13795:2020 "Mooring and towing equipment for ships and offshore technical ships - steel welded cable piles for sea-going ships" Drafted, the degree of consistency is "non-equivalent": Please note that some contents of this document may refer to patents: The issuing agency of this document assumes no responsibility for identifying patents: This document is proposed and managed by the National Ship Outfitting Standardization Technical Committee (SAC/TC129): This document is drafted by: Jiangnan Shipbuilding (Group) Co:, Ltd:, China Shipbuilding and Ocean Engineering Design and Research Institute: The main drafters of this document: Tao Dongming, Sang Wei, Wang Yun, Sun Jiaxiu, Qian Qiang: The previous versions of the standards replaced by this document are as follows: --- First published in 1983 as GB/T 554-1983, first revised in:1996; --- During the second revision in:2008, it incorporated GB/T 558-1983 "Technical Conditions for Cable Bollards" (history of GB/T 558-1983 The release status is: GB/T 558-1965, GB/T 558-1976); --- This is the third revision: Ships and offshore technology Ship mooring and towing equipment Sea-going steel welded cable piles

1 Scope

This document specifies the classification, marking, requirements, test methods, inspection rules, and standards for steel welded cable piles (abbreviated as cable piles) marking, transportation and storage: This document is applicable to the design, manufacture and inspection of cable bollards for sea-going ships:

2 Normative references

The contents of the following documents constitute the essential provisions of this document through normative references in the text: Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document: GB/T 699-2015 High-quality carbon structural steel GB/T 700-2006 carbon structural steel GB/T 712-2011 Structural steel for ships and marine engineering GB/T 8162-2018 Structural seamless steel tubes GB/T 8923:1-2011 Visual assessment of surface cleanliness of steel surface treatment before coating - Part 1: Uncoated The rust level and treatment level of the steel surface and the steel surface after the original coating has been completely removed GB/T 17395-2008 seamless steel pipe size, shape, weight and tolerance CB/T 3155-2013 Auxiliary cables with cables equipment)

3 Terms and Definitions

The following terms and definitions apply to this document: 3:1 safe working load safe working load; SWL Limit safe load (maximum permissible load) for mooring outfitting: 3:2 The ultimate safe load (maximum permissible load) for mooring outfitting for normal and other towing operations:

4 Classification and labeling

4:1 Classification and labeling 4:1:1 See Table 1 for the classification of cable piles:

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 554-2023_English be delivered?

Answer: Upon your order, we will start to translate GB/T 554-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 554-2023_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 554-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 554-2023?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 554-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.