GB 38230: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB 38230-2025 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Fall protection - Descender devices
| Valid |
GB 38230-2025
|
| GB/T 38230-2019 | English | 599 |
Add to Cart
|
5 days [Need to translate]
|
Personal fall protection equipment - Descender devices
| Valid |
GB/T 38230-2019
|
Basic data | Standard ID | GB 38230-2025 (GB38230-2025) | | Description (Translated English) | Fall protection - Descender devices | | Sector / Industry | National Standard | | Date of Implementation | 2026-09-01 | | Older Standard (superseded by this standard) | GB/T 38230-2019 | GB/T 38230-2019: Personal fall protection equipment - Descender devices---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Personal fall protection equipment--Descender devices
ICS 13.340.99
C73
National Standards of People's Republic of China
Fall protection falling device
Published on.2019-10-18
2020-05-01 implementation
State market supervision and administration
China National Standardization Administration issued
Content
Foreword III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Classification, grading and marking 2
5 Technical requirements 3
6 Test Method 5
7 Inspection rules 19
8 logo 21
9 Information provided by the manufacturer 21
Appendix A (Normative) Test Sample Requirements 23
Appendix B (informative) Preventive inspection records 24
Reference 25
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed by the Emergency Management Department of the People's Republic of China.
This standard is under the jurisdiction of the National Personal Protective Equipment Standardization Technical Committee (SAC/TC112).
This standard was drafted. Beijing Labor Protection Science Research Institute, Kaibit Security Equipment (Shanghai) Co., Ltd., Honeywell Security
Protective Equipment (Shanghai) Co., Ltd., Ningbo Tianhong Electric Appliance Co., Ltd.
The main drafters of this standard. Chen Yuwei, Xu Chao, Lin Ling, Lu Weihong, Xiao Yiqing, Cai Jizhen.
Fall protection falling device
1 Scope
This standard specifies the classification, classification and marking, technical requirements, test methods, inspection rules and signs of the descending device.
This standard applies to both automatic and manual descent devices for vertical use.
This standard does not apply to building fire escape descent devices.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 10125 artificial atmosphere corrosion test salt spray test
GB/T 23469 fall protection connector
GB 24544 fall protection speed difference automatic controller
GB 30862 fall protection hanging point device
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Descending device descenderdevices
A device that allows the user to land on the ground at a certain speed or assisted by others from a height.
Note 1. It can be divided into automatic descending device and manual descending device.
Note 2. The descending device can be composed of a descending rope and a speed limiting member.
3.2
Automatic descending device automaticdescenderdevice
A descending device for the user to apply human intervention to the speed limiting device is not required during the descent.
3.3
Manual descending device manualy-operateddescenderdevice
During the descent process, the user can manually control the speed limit device to reach the descent device that controls the speed function.
3.4
Locking mechanism paniclockingelement
An emergency brake that is integrated with the descending device and that is used when the speed is out of control or needs to be terminated.
3.5
Falling rope descentline
A component that is connected to the speed limiting component of the descending device to determine the direction of descent during the descent and to withstand the load.
Note. Made of fiber rope, webbing or wire rope.
|