|
US$159.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 24387-2009: [GB/T 24387-2009] Safety requirement for agriculture and forestry tractor fuel tank
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB 24387-2009 | English | 159 |
Add to Cart
|
2 days [Need to translate]
|
[GB/T 24387-2009] Safety requirement for agriculture and forestry tractor fuel tank
| Valid |
GB 24387-2009
|
PDF similar to GB 24387-2009
Basic data | Standard ID | GB 24387-2009 (GB24387-2009) | | Description (Translated English) | [GB/T 24387-2009] Safety requirement for agriculture and forestry tractor fuel tank | | Sector / Industry | National Standard | | Classification of Chinese Standard | T60 | | Classification of International Standard | 65.060.10 | | Word Count Estimation | 5,540 | | Date of Issue | 2009-09-30 | | Date of Implementation | 2010-07-01 | | Quoted Standard | GB/T 23292-2009 | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 10 of 2009 (No. 150 overall) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This Chinese standard specifies the agricultural and forestry tractor fuel tank safety performance requirements. This standard applies to agricultural and forestry tractors metal fuel tank and plastic fuel tanks, other materials may also refer to the implementation of the fuel tank. | GB 24387-2009: [GB/T 24387-2009] Safety requirement for agriculture and forestry tractor fuel tank
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Safety requirement for agriculture and forestry tractor fuel tank
ICS 65.060.10
T60
National Standards of People's Republic of China
Agriculture and forestry tractor fuel tank safety requirements
Posted 2009-09-30
2010-07-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
All the technical contents of this standard is mandatory.
This standard adopts some elements of the EC Regulation ECE-R34 (Rev.1,2003年版) "motor vehicle on fire certification of unified regulations
Fixed "(in English).
The standard proposed by China Machinery Industry Federation.
This standard by the National Standardization Technical Committee of the tractor.
This standard is drafted by. National Tractor Quality Supervision and Inspection Center.
It participated in the drafting of this standard. Jiangsu Changfa Group.
The main drafters of this standard. Ren Yueguang, Ba Jin good.
Agriculture and forestry tractor fuel tank safety requirements
1 Scope
This standard specifies the safety requirements for agricultural and forestry tractor fuel tank.
This standard applies to agricultural and forestry tractors metal and plastic fuel tank fuel tank, other materials may also refer to the implementation of the fuel tank.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 23292-2009 Test methods tractor fuel tank
3 Safety Requirements
3.1 General requirements
3.1.1 The fuel tank should have corrosion resistance.
3.1.2 The fuel tank bolt and nut tightening torque should meet the relevant standards.
3.1.3 The fuel tank should not exceed the rated capacity of the fuel tank capacity of 95%.
3.1.4 The fuel tank should be venting means (such as a vent, safety valves, etc.), the device should be able to vent the fuel tank pressure is compensated for automatically.
Vents should be able to fire.
3.1.5 installation location should be away from the fuel tank of the engine exhaust pipes and other high temperature components, and to avoid the fuel tank to withstand the tractor from the front or rear
The impact caused the fuel tank to crack damage, fuel spill.
3.1.6 parts around the fuel tank does not allow sharp protrusions and sharp edges.
3.1.7 the fuel tank and fuel supply line opening should be installed outside the cab driver safety or space.
3.1.8 The total leakage and fuel tank cap breather device should not exceed 30g/min, test according to GB/T 23292-2009 2.1 requirements
get on.
3.1.9 Safety valve opening pressure shall not exceed 50kPa. When the fuel tank is higher than the pressure relief valve opening pressure 5kPa, safety valve should open
start. Test Press 23292-2009 in 2.2 requirements GB/T performed.
3.2 Requirements metal fuel tank
3.2.1 metal fuel tank vibration durability
Metal fuel tank vibration durability according to GB/T 23292-2009 2.4 requirements in the test, the fuel tank should be no fuel leakage
phenomenon.
3.2.2 pressure resistance of the metal fuel tank
Metal fuel tank pressure resistance according to GB T 23292-2009 2.5 requirements/test, the fuel tank should be no leakage, cracking now
Like, allowing permanent deformation does not affect the normal use of the fuel tank.
3.3 plastic fuel tank requirements
3.3.1 plastic fuel tank vibration durability
Plastic fuel tank vibration durability press GB/T 23292-2009 2.4 requirements in the test, the fuel tank should be no fuel leakage.
3.3.2 plastic fuel tank pressure resistance
Plastic fuel tank pressure resistance in the press 23292-2009 2.6 with GB/T test, the fuel tank should be no leakage, cracking phenomenon,
Allow permanent deformation does not affect the normal use of the fuel tank.
3.3.3 plastic fuel tank low-temperature impact resistance
Plastic fuel tank low-temperature impact resistance according 23292-2009 specified in GB/T 2.7 were tested, the fuel tank should be no leakage.
3.3.4 heat resistance of plastic fuel tank
Heat resistance of plastic fuel tank according to GB/T 23292-2009 2.8 requirements in the test, the fuel tank should be no leakage.
3.3.5 fire resistance of plastic fuel tank
Plastic fuel tank fire resistance according to GB T 23292-2009 in 2.9 requirements/test, the fuel tank should be no leakage and serious
Deformation.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 24387-2009_English be delivered?Answer: Upon your order, we will start to translate GB 24387-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB 24387-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB 24387-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|