|
US$519.00 ยท In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 17565-2022: General specifications for burglary-resistant security doors
Status: Valid GB 17565: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB 17565-2022 | English | 519 |
Add to Cart
|
5 days [Need to translate]
|
General specifications for burglary-resistant security doors
| Valid |
GB 17565-2022
|
| GB 17565-2007 | English | 679 |
Add to Cart
|
4 days [Need to translate]
|
General specification burglary resistant safety door
| Obsolete |
GB 17565-2007
|
| GB 17565-1998 | English | 439 |
Add to Cart
|
4 days [Need to translate]
|
General specification for burglary resistant safety door
| Obsolete |
GB 17565-1998
|
PDF similar to GB 17565-2022
Basic data | Standard ID | GB 17565-2022 (GB17565-2022) | | Description (Translated English) | General specifications for burglary-resistant security doors | | Sector / Industry | National Standard | | Classification of Chinese Standard | A91 | | Classification of International Standard | 13.310 | | Word Count Estimation | 26,225 | | Date of Issue | 2022-12-01 | | Date of Implementation | 2024-01-01 | | Older Standard (superseded by this standard) | GB 17565-2007 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB 17565-2022: General specifications for burglary-resistant security doors---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 13.310
CCSA91
National Standards of People's Republic of China
Replacing GB 17565-2007
General technical specifications for anti-theft safety doors
Released on 2022-12-01
2024-01-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Management Committee
table of contents
Preface III
Introduction V
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Grading, Classification and Labeling 3
5 Technical Requirements 4
6 Test method 7
7 Inspection rules 15
7.1 Type inspection 15
7.2 Factory inspection 15
7.3 Inspection items 15
7.4 Inspection and Judgment Rules 16
Appendix A (Normative) Classification of Universal Locks and Relevant Size Requirements 17
Fig.1 Schematic diagram of frame-sash overlap width9
Figure 2 Anti-intrusion performance test 11
Figure 3 Soft impact performance test 12
Figure 4 Suspension load performance test 13
Figure 5 Performance test for impacting obstacles14
Figure A.1 Outline dimensions of the lock body 17
Figure A.2 Outline dimension of lock cylinder 18
Table 1 Anti-theft security level 3
Table 2 Nominal thickness of steel plate5
Table 3 Allowable negative deviation of steel plate thickness 5
Table 4 Dimension tolerance of door frame and door leaf diagonal and height and width tolerance of door frame notch and door leaf 6
Table 5 The maximum change in the gap between the door frame and the door leaf after the soft impact performance test of the door leaf7
Table 6 Type inspection, factory inspection items 15
Table A.1 Specifications, Models and Dimensions of Lock Body 18
Table A.2 Outline Dimensions of Lock Cylinder 19
foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents"
drafting.
This document replaces GB 17565-2007 "General Technical Conditions for Security Doors". Compared with GB 17565-2007, except for structural adjustment and
Apart from editorial changes, the main technical changes are as follows.
a) Added some terms and definitions (see 3.3~3.5, 3.7~3.9), changed some terms and definitions (see 3.1, 3.2, 3.6,.2007
version 3.1~3.3);
b) Changed the "grading" of the anti-theft safety door, changed the expression method of the anti-theft safety level, the requirements for destruction tools, etc. (see 4.1,
4.1, 5.6.1 of the.2007 edition);
c) Added the "classification" of anti-theft safety doors (see 4.2);
d) Changed the "mark" of the anti-theft safety door (see 4.3, 4.3 of the.2007 edition);
e) The basic requirements and test methods such as the appearance and the materials used on the anti-theft safety door have been changed (see 5.1.1, 5.1.3, 6.1.1, 6.1.3,
5.1, 5.2, 6.2, 6.3 of the.2007 edition);
f) Changed the content and style of permanent signs (see 5.1.2, 5.3 of the.2007 edition);
g) The content of "marking" has been changed and specified as a technical requirement, and its inspection method has been added (see 5.1.4, 6.1.4,.2007 edition
8.1);
h) The contents of "plate material" and "plate thickness of other materials" are deleted (see 5.4.1 and 5.4.3 of the.2007 edition), and "steel
Added the requirements for the lower frame of the door frame, changed the requirements for the allowable negative deviation of the thickness of the steel plate, and the corresponding test methods
(See 5.2, 6.2, 5.4.2, 6.5.2 of the.2007 edition);
i) The classification of locks and their test methods are added (see 5.3.1.1, 6.3.1.1), and the technology of size and shape of universal locks is added
Requirements (see Appendix A);
j) Changed the configuration requirements and test methods of different anti-theft security levels for anti-theft locks (see 5.3.1.2, 6.3.1.2,.2007 edition
5.6.1, 5.10.2, 5.10.3, 6.11), adding the requirement that anti-theft locks be opened from the side of the protective surface and the side of the non-protective surface (see 5.3.1.2);
k) Changed the requirements and test methods for the reinforced protective plate of anti-theft locks (see 5.3.2.1, 6.3.2.1, 5.10.1, 6.11 of the.2007 edition);
l) Added the strength requirements and test methods for the anti-drilling sleeve of the lock cylinder and the handle (see 5.3.2.2, 5.3.2.3, 6.3.2.2, 6.3.2.3);
m) Changed the "hinge and its installation requirements" and test methods (see 5.4, 6.4, 5.9, 6.10 of the.2007 edition);
n) Changed the requirements and test methods of "locking bolt" (see 5.5, 6.5, 5.10.4, 5.10.5, 6.11 of the.2007 edition);
o) Added requirements and test methods for "door mirror" (see 5.6, 6.6);
p) Changed the dimensional tolerances of the door leaf and the door frame, the lap width and fit clearance requirements, as well as the corresponding test methods (see 5.7,
6.7, 5.5, 6.6 of the.2007 edition), delete the flatness requirements of the door leaf (5.5.4 of the.2007 edition);
q) Added "surface quality" requirements and test methods (see 5.8, 6.8);
r) Changed the requirements and test methods for "anti-sabotage performance" (see 5.9, 6.9, 5.6.2, 6.7.2 of the.2007 edition);
s) The requirements and test methods for "soft impact performance" have been changed (see 5.11, 6.11, 5.6.4, 6.7.4 of the.2007 edition);
t) Changed the requirements for "suspension end hoisting performance" (see 5.12, 5.7 of the.2007 edition);
u) Added requirements and test methods for "other additional functions" (see 5.14, 6.14);
v) The requirements and test methods for the external emergency power supply interface are added (see 5.15.3, 6.15.3);
w) Deleted packaging, transportation and storage (8.2, 8.3, 8.4 of the.2007 edition).
Please note that some contents of this document may refer to patents. The issuing agency of this document assumes no responsibility for identifying patents.
This document was proposed and managed by the Ministry of Public Security of the People's Republic of China.
The release status of previous versions of this document and the documents it replaces are as follows.
---First published as GB 17565-1998 in.1998, first revised in.2007;
--- This is the second revision.
Introduction
GB 17565-2007 "General Technical Conditions for Anti-theft Safety Doors" has been implemented for more than ten years.
Production and improvement of product quality have played a positive role. With the development of industry and technology, it is urgent to revise the original standard to further improve
The quality level of products adapts to the industry trend of high-quality development in the country. In this revision of the standard, the original marking method indicating the safety level has been modified.
In order to meet the requirements of standard internationalization, and moderately increase the product level to meet the demand for products in higher security occasions; in order to maintain the standard
In order to facilitate the coordination of various physical defense
In order to improve the interchangeability of anti-theft security door locks,
In order to promote and standardize the healthy development of the industry, this document proposes the appearance and size requirements of general-purpose locks.
General technical specifications for anti-theft safety doors
1 Scope
This document specifies the classification, classification, marking and technical requirements for anti-theft safety doors, describes the test methods for anti-theft safety doors, and determines the anti-theft safety doors.
Inspection rules for burglar security doors.
This document is applicable to the design, manufacture, testing,
acceptance.
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references
For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
this document.
GB/T 9286-2021 Paints and varnishes cross cut test
GB 10409-2019 Anti-theft safe (box)
GB 18580 Limits of formaldehyde release in wood-based panels and their products for interior decoration and refurbishment
GA/T 73-2015 Mechanical anti-theft locks
GA374-2019 Electronic anti-theft lock
3 Terms and Definitions
The following terms and definitions defined in GB 10409 apply to this document.
3.1
It can resist abnormal opening under certain conditions within a certain period of time, has certain safety protection performance and meets the corresponding anti-theft safety level
the door.
Note. referred to as "anti-theft door".
3.2
Under the action of specified destructive tools, the grade is divided according to the length of time that the weakest link of the anti-theft door can resist abnormal opening.
3.3
protection surface
The anti-theft door is on the surface of the door leaf outside the protected area.
3.4
locking bolt lockingbolt
A bolt-like device that reaches a certain strength and restricts the relative movement of the door leaf and the door frame.
3.5
simple hand tool simplehardtool
Including various styles of hardware tools with a length less than or equal to 150mm and a diameter less than or equal to 25mm.
|