|
US$569.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 10002.1-2023: Unplasticized poly (vinyl chloride) (PVC-U) pipes for water supply
Status: Valid GB/T 10002.1: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 10002.1-2023 | English | 569 |
Add to Cart
|
5 days [Need to translate]
|
Unplasticized poly (vinyl chloride) (PVC-U) pipes for water supply
| Valid |
GB/T 10002.1-2023
|
| GB/T 10002.1-2006 | English | 599 |
Add to Cart
|
3 days [Need to translate]
|
Unplasticized poly (vinyl chloride) (PVC-U) pipes for water supply
| Obsolete |
GB/T 10002.1-2006
|
| GB/T 10002.1-1996 | English | 639 |
Add to Cart
|
5 days [Need to translate]
|
Unplasticized polyvinyl chloride (PVC-U) pipe for water supply
| Obsolete |
GB/T 10002.1-1996
|
| GB 10002.1-1988 | English | 639 |
Add to Cart
|
5 days [Need to translate]
|
Unplasticized polyvinyl chloride (PVC-U)pipe for water supply
| Obsolete |
GB 10002.1-1988
|
PDF similar to GB/T 10002.1-2023
Basic data | Standard ID | GB/T 10002.1-2023 (GB/T10002.1-2023) | | Description (Translated English) | Unplasticized poly (vinyl chloride) (PVC-U) pipes for water supply | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G33 | | Classification of International Standard | 83.140.30 | | Word Count Estimation | 30,352 | | Date of Issue | 2023-09-07 | | Date of Implementation | 2024-04-01 | | Older Standard (superseded by this standard) | GB/T 10002.1-2006 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 10002.1-2023: Unplasticized poly (vinyl chloride) (PVC-U) pipes for water supply---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 83.140.30
CCSG33
National Standards of People's Republic of China
Replace GB/T 10002.1-2006
Rigid polyvinyl chloride (PVC-U) pipes for water supply
Published on 2023-09-07
2024-04-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration Committee
Table of contents
Preface III
Introduction V
1 Scope 1
2 Normative reference documents 1
3 Terms and definitions, symbols, abbreviations2
4 Materials 3
5 Product Category 3
6 Requirement 3
7 System suitability10
8 Test methods 11
9 Inspection Rules 13
10 Marking, transportation and storage 14
Appendix A (Informative) Temperature-to-pressure reduction coefficient 16
Appendix B (informative) Performance of rigid polyvinyl chloride (PVC-U) pipe compounds for water supply17
Appendix C (normative) Elastic sealing rings for water supply, drainage pipes and sewage pipes 18
Reference 22
Foreword
This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents"
Drafting.
This document is Part 1 of GB/T 10002.GB/T 10002 has released the following parts.
---Part 1.Rigid polyvinyl chloride (PVC-U) pipes for water supply;
---Part 2.Rigid polyvinyl chloride (PVC-U) pipe fittings for water supply;
---Part 3.Rigid polyvinyl chloride (PVC-U) valves for water supply.
This document replaces GB/T 10002.1-2006 "Hard polyvinyl chloride (PVC-U) pipes for water supply" and is consistent with GB/T 10002.1-2006
In addition to structural adjustments and editorial changes, the main technical changes are as follows.
a) Changed the scope and added application to pressure drainage pipeline systems (see Chapter 1, Chapter 1 of the.2006 edition);
b) Changes in terms and definitions (see Chapter 3, Chapter 3 of the.2006 edition);
c) Added the recommended performance of the compound (see 4.1), changed the K value requirements of PVC resin (see 4.2, 4.2 of the.2006 edition),
The requirements for the use of cleaning recycled materials have been changed (see 4.4,.2006 version of 4.4), and the requirements for elastic sealing rings have been changed (see 4.6,
Appendix C, 6.7 of the.2006 edition);
d) The nominal outer diameter range of pipes has been increased, and the outer diameter has been expanded to 1200mm (see 6.3.1);
e) The requirements for wall thickness and allowable deviation at any point have been changed (see 6.3.2, 6.4.4.1 of the.2006 edition);
f) The requirements for average wall thickness and allowable deviation of pipes are deleted (see 6.4.4.2 of the.2006 edition);
g) The requirements for the minimum joint length of the elastic sealing ring socket have been changed, and the requirements for the average inner diameter of the middle part of the elastic sealing ring socket have been added.
dn250mm~dn400mm adhesive socket minimum socket depth and average inner diameter requirements in the middle of the socket (see Table 5,.2006
version of Table 8);
h) The opacity requirements have been changed (see Table 7, 6.3 of the.2006 edition);
i) Added requirements for tensile yield stress and elongation at break (see Table 7);
j) The methylene chloride immersion test requirements are deleted (see Table 9 of the.2006 edition);
k) Added requirements for hydrostatic strength of pipe sockets (see Table 9);
l) The system suitability implementation requirements have been changed (see Chapter 7, 6.7 of the.2006 edition), and the 20℃, 1h connection sealing test requirements have been deleted.
Requirements, added 20℃, 40℃, 1000h connection sealing test requirements (see Table 12, 7.11.1 of the.2006 edition);
m) Added and changed some test methods (see Chapter 8, Chapter 7 of the.2006 edition);
n) Added inspection classification (see 9.1);
o) Changes in batching and grouping requirements (see 9.2, 8.2 and 8.3 of the.2006 version);
p) Deleted the stereotype test (see 8.4 of the.2006 version);
q) The requirements for factory inspection items have been changed (see 9.3.1, 8.5.1 of the.2006 edition);
r) The sampling plan was changed, and the acceptance quality limit (AQL) was changed from 6.5 to 4.0 (see 9.3.2, 8.5.2 of the.2006 version);
s) Changed the type inspection requirements (see 9.4, 8.6 of the.2006 edition);
t) Changed the product logo (see 10.1, 9.1 of the.2006 version);
u) The packaging mark is deleted (see 9.2 of the.2006 version);
v) The product stacking height has been changed (see 10.3, 9.4 of the.2006 edition).
Please note that some content in this document may be subject to patents. The publisher of this document assumes no responsibility for identifying patents.
This document is proposed by China Light Industry Federation.
This document is under the jurisdiction of the National Technical Committee for Standardization of Plastic Products (SAC/TC48).
This document was drafted by. Chengdu Chuanlu Plastic Group Co., Ltd., AD Co., Ltd., Fujian Yatong New Material Technology Co., Ltd.
Company, Hebei Quanen High-tech Pipe Industry Co., Ltd., Danyang Zhongwang Rubber and Plastic Products Co., Ltd., Nanya Plastic Industry (Xiamen) Co., Ltd., Hebei
Hengyun Rubber Products Co., Ltd., Fujian Jiyou Plastic Co., Ltd., Guangdong Liansu Technology Industrial Co., Ltd., Zhongyu Hose Technology Co., Ltd.
Company, Shandong Liansu Technology Industrial Co., Ltd., Rifeng Enterprise Group Co., Ltd., AD Pipeline (Anhui) Co., Ltd., Nansu Building Materials Plastic Manufacturing Co., Ltd.
Products (Shenzhen) Co., Ltd., Gudi Technology Co., Ltd., Baoding Lida Plastic Co., Ltd., Sinopec (Beijing) Chemical Research Institute Co., Ltd.
Company, Shandong Dongxin Plastic Technology Co., Ltd., Zhongshan Huanyu Industrial Co., Ltd.
The main drafters of this document. Jia Lirong, Huang Jian, Chen Xiaomei, Zhu Ruixia, Xi Quanwei, Lin Yanqing, Bai Yuguo, Lin Zhanghong, Li Tongyi,
Zhang Yongcheng, Wang Tingting, Lu Ailong, Huang Jianfeng, Wang Wenbi, Li Xianmei, Li Yanying, Li Yu'e, Pan Fuqu, Zeng Zhenguo, Liu Yue.
The previous versions of this document and the documents it replaces are as follows.
---First published as GB/T 10002.1-1988 in 1988, revised for the first time in.1996, and revised for the second time in.2006;
---This is the third revision.
Introduction
Plastic pipes and pipe fittings are widely used in urban tap water supply projects, internal and external building water supply projects, and farmland water conservancy and irrigation.
Engineering, water supply projects for industrial and mining enterprises, water supply projects for landscaping and greening, aquaculture water supply and drainage projects, etc.
GB/T 10002 aims to standardize the production and use of rigid polyvinyl chloride (PVC-U) pipes, fittings and valves for water supply.
The olefin piping system consists of the following 3 parts.
---Part 1.Rigid polyvinyl chloride (PVC-U) pipes for water supply, the purpose is to standardize the technology of rigid polyvinyl chloride pipe products for water supply
technical requirements;
---Part 2.Rigid polyvinyl chloride (PVC-U) pipe fittings for water supply, the purpose is to standardize the technology of rigid polyvinyl chloride pipe fittings for water supply
technical requirements;
---Part 3.Rigid polyvinyl chloride (PVC-U) valves for water supply, the purpose is to standardize the technology of rigid polyvinyl chloride valve products for water supply
technical requirements.
In addition, Appendix C of this document stipulates the classification, materials, requirements, test methods, inspection rules and identification, marking and
Labeling, packaging, transportation and storage, etc., with the purpose of standardizing the performance of elastic sealing rings for plastic water supply and drainage pipe products and ensuring the sealing of the sealing rings
Durability, improves the service life of plastic pipe systems, and facilitates the reference of other relevant standards.
Rigid polyvinyl chloride (PVC-U) pipes for water supply
1 Scope
This document specifies the extrusion molding of rigid polyvinyl chloride (PVC-U) pipes for water supply using rigid polyvinyl chloride (PVC-U) compounding ingredients.
Materials, product classifications, appearance, colors, specifications, physical and mechanical properties, hydrostatic strength, hygiene and systems of pipes (hereinafter referred to as "pipes")
Applicability and other requirements, describe the corresponding test methods, and stipulate inspection rules, marking, transportation, and storage content.
This document is applicable to rigid polyvinyl chloride (PVC-U) pipe systems for underground water supply in buildings or outdoors with water temperatures not exceeding 45°C, including
General purpose pressure water transmission and drinking water distribution, also suitable for the production, inspection and sales of pressure drainage pipeline systems.
Note 1.See Appendix A for the pressure reduction coefficient for operating temperatures between 0°C and 45°C.
Note 2.The purchaser is responsible for appropriately selecting the products specified in this document based on its specific application needs and in conjunction with relevant regulations, standards or specifications.
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations
For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to
this document.
GB/T 1033.1 Determination of density of plastic non-foam plastics Part 1.Dip method, liquid pycnometer method and titration method
GB/T 1685 Determination of compressive stress relaxation of vulcanized rubber or thermoplastic rubber at room temperature and high temperature
GB/T 1690 Test method for liquid resistance of vulcanized rubber or thermoplastic rubber
GB/T 2828.1 Enumeration sampling inspection procedures Part 1.Batch-by-batch inspection sampling plan retrieved by acceptance quality limit (AQL)
GB/T 2918 Standard environment for conditioning and testing of plastic specimens
GB/T 3512 Hot air accelerated aging and heat resistance test of vulcanized rubber or thermoplastic rubber
GB/T 4615 Determination of residual vinyl chloride monomer in polyvinyl chloride by gas chromatography
GB/T 5721-1993 General provisions for marking, packaging, transportation and storage of rubber sealing products
GB/T 5761 Suspension method general-purpose polyvinyl chloride resin
GB/T 6111 Determination of internal pressure resistance of thermoplastic piping systems for fluid transportation
GB/T 6671 Determination of longitudinal shrinkage of thermoplastic pipes
GB/T 7759.1 Determination of compression permanent deformation of vulcanized rubber or thermoplastic rubber Part 1.Under normal and high temperature conditions
GB/T 8802 Determination of Vicat softening temperature of thermoplastic pipes and fittings
GB/T 8804.2 Determination of tensile properties of thermoplastic pipes Part 2.Rigid polyvinyl chloride (PVC-U), chlorinated polyvinyl chloride
(PVC-C) and high-impact polyvinyl chloride (PVC-HI) pipes
GB/T 8806 Determination of dimensions of plastic components of plastic piping systems
GB/T 10002.2-2023 Rigid polyvinyl chloride (PVC-U) pipe fittings for water supply
GB/T 12832 Determination of rubber crystallization effect Hardness measurement method
GB/T 14152 Test method for external impact resistance of thermoplastic pipes. clockwise rotation method
GB/T 14837.1 Determination of components of vulcanized rubber and unvulcanized rubber by thermogravimetric analysis of rubber and rubber products - Part 1.Butadiene
Rubber, ethylene-propylene co- and terpolymers, isobutylene-isoprene rubber, isoprene rubber, styrene-butadiene rubber
GB/T 15254 180° peel test of vulcanized rubber and metal bonding
GB/T 17219 Safety Evaluation Standard for Drinking Water Transmission and Distribution Equipment and Protective Materials
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 10002.1-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 10002.1-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 10002.1-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 10002.1-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 10002.1-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 10002.1-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|