GA/T 720: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GA/T 720-2014 | English | RFQ |
ASK
|
8 days [Need to translate]
|
Procedures for fire standard development
| Obsolete |
GA/T 720-2014
|
| GA/T 720-2007 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Procedures for fire protection standardization
| Obsolete |
GA/T 720-2007
|
PDF similar to GA/T 720-2014
Standard similar to GA/T 720-2014 GB 13495.1 GB 8624 GB/T 8626 GA/T 974.4 Basic data | Standard ID | GA/T 720-2014 (GA/T720-2014) | | Description (Translated English) | Procedures for fire standard development | | Sector / Industry | Public Security (Police) Industry Standard (Recommended) | | Classification of Chinese Standard | C80 | | Classification of International Standard | 13.220.01 | | Word Count Estimation | 50,511 | | Older Standard (superseded by this standard) | GA/T 720-2007 | | Quoted Standard | GB/T 1.1; GB/T 20000.1; GB/T 20000.2; GB/T 20000.3; GB/T 20000.6; GB/T 20000.7; GB/T 20000.8; GB/T 20000.9; GB/T 20001.1; GB/T 20001.2; GB/T 20001.3; GB/T 20001.4; GB/T 20001.10; GB/T 20002.1; GB/T 20002.2; GB/T 20002.3; GB/T 20002.4; GB/T 20003.1; GA/T 1 | | Regulation (derived from) | Announcement of the Ministry of Public Security (2015.02.16); Industry Standard Record Announcement No. 4 of 2015 (No. 184 of the General Administration of Industrial Safety of the People Republic of China) | | Issuing agency(ies) | Ministry of Public Security | | Summary | This standard stipulates the code number, basic requirements, work procedures of each phase and standard revising list, standard project plan adjustment, standard publicizing and daily management. This standard applies to fire national standards and indus | GA/T 720-2014: Procedures for fire standard development---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Procedures for fire standard development
ICS 13.220.01
C80
People's Republic of China Public Security Industry Standards
Replacing GA/T 720-2007
Fire amend standards program
Issued on. 2014-11-13
2014-11-13 implementation
People's Republic of China Ministry of Public Security
Table of Contents
Preface Ⅰ
1 Scope 1
2 Normative references 1
3 Label 1
4 Basic requirements 2
5 preparatory phase 2
6 Phase 4 project
7 draft stage 5
8 comments for Stage 6
9 Review Stage 7
10 approval stage 11
11 publication stage 11
12 review stage 11
13 repealed stage 12
14 amendments standard developed 12
15 standard project planning and coordination 13
16 standard Publicizing and daily management 13
Appendix A (informative) standard application documents for the project in style 15
Annex B (informative) Fire standard application form and rationality Shape 22
Annex C (normative) Fire revision of the standard project contracts Shape 24
Annex D (informative) Fire Classification criteria commonly used international standards (ICS) and Chinese Standard Literature Classification 32
Annex E (informative) Summary Standard treatment table style 33 views
Annex F (normative) General principles of fire safety standards experts to review the signature 34
Annex G (informative) Standard Form Han Shen Shape 35
Appendix H (informative) Fire approval standard table style 37
Annex I (informative) standard declaration Shape 38
Appendix J (informative) mandatory standards through reports Shape 40
Annex K (informative) standard review form Shape 43
Annex L (informative) standard style table amendments for approval 44
References 47
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
Instead of the standard GA/T 720-2007 "Standard for Fire and revision procedures", as compared with GA/T 720-2007, in addition to editorial repair
Change outside the main technical changes are as follows.
--- Modify the list of normative references (see Chapter 2, Section 2 of the 2007 edition);
--- Delete terms and definitions (see the 2007 version of Chapter 3);
--- Modify the code (see Chapter 3, Chapter 4 of the 2007 edition);
--- Information about fire safety standards and revision process of information system management requirements (see 4.5);
--- Modify the presentation of the various stages of preparation and revision of standards relating to the outcome of phase and duty cycle (see the edition 4.6,2007
6.1.4,6.2.4,6.3.3,6.4.4,6.5.4,6.6.6);
--- Modified documents when applying fire standards project (see 5.1.2, Annex A, 2007 edition 6.1.1.3, Annex A);
--- Modified standard signing the project contract provisions (see 6.2, Appendix B, Appendix C, 2007 version 6.2.3, Appendix B, Appendix C);
--- Altered the structure of the draft standard when drafting the provisions of the contents (see version 7.2.2,2007 6.3.2.3);
--- Modify the contents of the standard preparation instructions written provisions (see version 7.2.3,2007 6.3.2.4);
--- Increases the formation of the standard provisions of the documents submitted for review (see 8.3);
--- Modify the principles for determining when the review expert to review standard techniques (see edition 9.1.4,2007 6.5.1.3);
--- Modify the specific procedures for the technical review of the draft standard for examination regulations (see 9.2,2007 version 6.5.2);
--- Remove the approval stage of the provisions of the applicable content into the results of the review and approval process and other work documents validation procedures, and complete
Good file for approval of the validation requirements (see 9.3,9.4,2007 version 6.6);
--- Increasing the approval phase of the work program (see Chapter 10);
--- Increasing the publishing phase of the work program (see Chapter 11);
--- Increased repeal phase of the program (see Chapter 13);
--- Amendments modify the standard setting procedures (see Chapter 14, 2007 version 7.4);
--- Revised standard project plans to adjust the work program (see Chapter 15, 2007 version 6.7);
--- Revised standard Publicizing the work program (see 16.1,2007 version 7.1).
This standard was proposed by the Ministry of Public Security Fire Department.
This standard by the National Standardization Technical Committee based on the standard fire Technical Committee (SAC/TC113/SC1) centralized.
This standard was drafted. Ministry of Public Security Fire Bureau, Ministry of Public Security in Tianjin Fire Research Institute, Shanghai Fire Research Institute of Ministry of Public Security, Ministry of Public Security Fire Shenyang
Research Institute, Ministry of Public Security of Sichuan Fire Research Institute.
The main drafters of this standard. Qu Li, Han Weiping, Li Yanjun, Guo Song, Shen Wen, Hu Rui, easing Yao, Liu Lianxi Chuang Shuang, Zhu Qing, Mao Yiping,
Zhang Decheng, Cheng Daobin, boosting Liu, Zhang Xuekui, Lu Zhi Bao, Shen Jian Min, Liu Junjun, Sui Hulin.
This standard replaces the standards previously issued as follows.
--- GA/T 720-2007.
Fire amend standards program
1 Scope
This standard specifies the fire safety standards and revision of the code, the basic requirements of the various stages of the work program and the development of standards amendments, standards
Project adjustment, standard Publicizing and daily management.
This standard applies to fire national standards and industry standards revision work. Fire place standard revision of the system can be implemented by reference.
This standard does not apply to construction Technical Standards on Fire (Fire Code) revision of the system.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 1.1 Standardization Guide Part 1. Standard structure and drafting
(All parts) GB/T 20000 standardization Guide
GB/T 20001 (all parts) Rules for drafting standards
Drafting GB/T 20002 (all parts) standard in specific content
Part 1 GB/T 20003.1 special program standards. The standard deals with patents
GA/T 1048.1 standard English translation requirements - Part 1. Terminology
GA/T 1048.2 standard English translation requirements - Part 2. Standard Name
Code 3
Fire amend standards may use the code specified in Table 1 (see GB/T 16733-1997).
Table 1 Code
Name Code Name Code
National Fire Protection Standardization Technical Committee TC113
Public Safety industry standardization
Technical guidance document
GA /Z
National Standardization Technical Committee on Fire
It belongs to the Technical Committee
SC standard project approval filings PWI
Mandatory national standard GB standard project plan NP
Recommended national standard GB/T standard draft WD
National standardization technical guidance document GB/Z standard manuscript CD
Mandatory public safety industry standard GA draft standard for approval DS
Recommended public safety industry standard GA/T standards published draft FDS
|