Search result: GB/T 8595-2023 (GB/T 8595-2008 Older version)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 8595-2023 | English | 604 |
Add to Cart
|
5 days [Need to translate]
|
Earth-moving machinery - Operator’s controls
| Valid |
GB/T 8595-2023
|
| GB/T 8595-2008 | English | 559 |
Add to Cart
|
3 days [Need to translate]
|
Earth-moving machinery -- Operator controls
| Obsolete |
GB/T 8595-2008
|
| GB/T 8595-2001 | English | 599 |
Add to Cart
|
4 days [Need to translate]
|
Earth-moving machinery -- Operator controls
| Obsolete |
GB/T 8595-2001
|
| GB/T 8595-1988 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Crawler tractors and crawler loaders--Operatorcontrols
| Obsolete |
GB/T 8595-1988
|
| Standard ID | GB/T 8595-2023 (GB/T8595-2023) | | Description (Translated English) | Earth-moving machinery - Operator��s controls | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | P97 | | Classification of International Standard | 53.100 | | Word Count Estimation | 34,391 | | Date of Issue | 2023-09-07 | | Date of Implementation | 2023-09-07 | | Older Standard (superseded by this standard) | GB/T 8595-2008 | | Issuing agency(ies) | State Administration for Market Regulation, National Standardization Administration |
GB/T 8595-2023. Control devices for drivers of earthmoving machinery
ICS 53.100
CCSP97
National Standards of People's Republic of China
Replace GB/T 8595-2008
Earthmoving machinery driver's controls
(ISO 10968.2020,IDT)
Published on 2023-09-07
Implemented on 2023-09-07
State Administration for Market Regulation
Released by the National Standardization Administration Committee
Table of contents
Preface III
1 range 1
2 Normative reference documents 1
3 Terms and Definitions 2
4 Requirements for control devices 4
4.1 Overview 4
4.2 Position of control device 4
4.3 Spacing of control devices 4
4.4 Measures to prevent movement or danger caused by external forces5
4.5 Pedal 5
5 Movement of control device 6
5.1 General 6
5.2 Multi-function control device 6
6 control force 7
Appendix A (Normative) Earthmoving Machinery---Host 9
Appendix B (normative) Earthmoving machinery --- working equipment 14
Appendix C (Normative) Earthmoving Machinery---Attached Devices 18
Appendix D (informative) Grader 21
Appendix E (informative) Bulldozer 25
Reference 28
Preface
This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents"
Drafting.
This document replaces GB/T 8595-2008 "Control Devices for Earthmoving Machinery Drivers". Compared with GB/T 8595-2008, except for the structure
In addition to adjustments and editorial changes, the main technical changes are as follows.
a) Changed the scope and added a description of unapplicable devices (see Chapter 1, Chapter 1 of the.2008 edition);
b) Added terms such as host machine, working device, accessory device, joystick, single-lever control device, double-lever control device (see 3.1, 3.5~
3.8, 3.11~3.20);
c) The content of the main control device has been changed and the accessory control device has been added (see 3.2, 3.1 of the.2008 edition);
d) Added an overview of the control device (see 4.1);
e) Changed the distance between adjacent center lines of finger-operated control devices without spacers (see Table 1,.2008 version
4.2.2);
f) Added requirements for distance between keys on the touch screen or buttons on the joystick, expected non-simultaneous use and expected simultaneous use of the pedals.
Pedal spacing requirements when boarding (see Table 1);
g) Added the principles that the type, location and operation method of typical main control devices should comply with (see 5.1.1);
h) Added requirements for foot-operated control devices (see 5.1.5);
i) The electrical signal requirement is deleted (see 5.1.5 of the.2008 version);
j) Added requirements for drivers entering and exiting the driver’s position (see 5.1.7);
k) Added gear/transmission/speed selection control requirements (5.1.8);
l) The basic functions of the multi-function control device and the content of the additional control mechanism on the device have been changed (see 5.2, 5.2 of the.2008 edition);
m) Changed the list of "controlling forces" (see Chapter 6, Chapter 6 of the.2008 edition);
n) Added example diagrams of the main engine and inverted U-shaped control device (see Figure A.1~Figure A.3);
o) Added control types, locations, operating requirements and examples of attachments (see Appendix C).
This document is equivalent to ISO 10968.2020 "Controls for drivers of earthmoving machinery".
Please note that some content in this document may be subject to patents. The publisher of this document assumes no responsibility for identifying patents.
This document is proposed by China Machinery Industry Federation.
This document is under the jurisdiction of the National Earthmoving Machinery Standardization Technical Committee (SAC/TC334).
This document was drafted by. Jiangsu XCMG Engineering Machinery Research Institute Co., Ltd., Huaneng Yimin Coal and Electricity Co., Ltd., Xuzhou XCMG Transmission
Technology Co., Ltd., Tianjin Engineering Machinery Research Institute Co., Ltd., Fangyuan Mark Certification Group Xiamen Co., Ltd., Lonking (Shanghai) Machinery Manufacturing
Co., Ltd., Shandong Carter Heavy Industry Machinery Co., Ltd.
The main drafters of this document. Wang Xia, Jiang Wen, Jiang Liqiao, Chen Baoqing, Ke Wenxun, Hua Liangbin, Liu Changjin, Xie Anxiang.
This document was first published in 1988, revised for the first time in.2001, revised for the second time in.2008, and this is the third revision.
Earthmoving machinery driver's controls
1 Scope
This document specifies requirements and guidance for machine controls directly operated by the driver of earthmoving machinery as defined in ISO 6165.prescribed hand
Finger, hand or foot control devices, but does not limit the application of other control forms, control positions or control actions.
This document does not apply to devices not directly related to machine control.
Note. For machines with driver-controlled remote controls see ISO 15817.
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations
For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to
this document.
ISO 3411 Earth-moving machinery driver’s body dimensions and driver’s minimum movement space (Earth-movingmachinery-
Note. GB/T 8420-2011 Body dimensions of earthmoving machinery drivers and minimum movement space of drivers (ISO 3411.2007, IDT)
ISO 3450 Performance requirements and test methods for braking systems of earth-moving machinery, wheeled or high-speed rubber tracked machines (Earth-
Note. GB/T 21152-2018 Performance requirements and test methods for braking systems of earthmoving machinery wheeled or high-speed rubber tracked machines (ISO 3450.
2011,MOD)
ISO 5010 Earth-moving machinery wheeled machine steering requirements (Earth-movingmachinery-Wheeledmachines-
Note. GB/T 14781-2014 Steering requirements for tire-type earthmoving machinery (ISO 5010.2007, IDT)
ISO 6405-1 Symbols for operator controls and other display devices of earth-moving machinery Part 1.General symbols (Earth-
Note. GB/T 8593.1-2021 Symbols for driver controls and other display devices of earthmoving machinery Part 1.General symbols (ISO 6405-1.
2017,IDT)
ISO 6405-2 Symbols for operator controls and other display devices of earthmoving machinery Part 2.Machines, work equipment and accessories
Note. GB/T 8593.2-2021 Symbols for driver controls and other display devices of earthmoving machinery Part 2.Machines, working devices and accessories
Special symbols (ISO 6405-2.2017, IDT)
ISO 10265 Performance requirements and test methods for braking systems of tracked machinery for earth-moving machinery (Earth-moving
Note. GB/T 19929-2014 Performance requirements and test methods for braking systems of tracked earthmoving machinery (ISO 10265.2008, IDT)
ISO 17063 Performance requirements and test methods for braking systems of earth-moving machinery for pedestrian operated machines (Earth-movingma-
cedures)
Note. GB/T 25609-2010 Braking system performance requirements and test methods for earth-moving machinery and pedestrian operated machines (ISO 17063.2003, IDT)
......
GB/T 8595-2008
Earth-moving machinery. Operator's controls
ICS 53.100
P97
National Standards of People's Republic of China
GB/T 8595-2008/ISO 10968.2004
Replacing GB/T 8595-2001
Moving machinery operating device
(ISO 10968.2004, IDT)
Posted 2008-08-26
2009-02-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Preface Ⅰ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 operating device Position 2
5 manipulator motion 3
6 Operating Force 4
The main common operating device Appendix A (normative) moving machinery hosts 6
The main operating device 9 Annex B (normative) moving machinery working device
GB/T 8595-2008/ISO 10968.2004
Foreword
This standard is identical with ISO 10968.2004 "moving machinery operating device" (in English).
This standard is equivalent to translate ISO 10968.2004.
For ease of use, this standard made the following editorial changes.
--- The "this International Standard" be replaced by "this standard";
--- Delete foreword international standards;
--- Of ISO 10968.2004 international standard referenced with the international standard has been adopted as the standard instead of the corresponding country.
This standard replaces GB/T 8595-2001 "moving machinery to manipulate."
This standard compared with GB/T 8595-2001, the main changes are as follows.
--- Standard name from "moving machinery manipulation" to "moving machinery operating device";
--- Increased provision 3.3,3.4,3.5,5.2,6.4, A. 3.2, A. 4.2, A. 4.3, A. 5.1.2, A. 6.2, A. 6.3.3, B. 1.4
B. 1.5, B. 2.2, B. 3.2, B. 4.3, B. 4.6, B. 5.4;
--- Remove the original Appendix C "manipulator of a typical arrangement."
The Standard Annexes A and B are normative appendix.
The standard proposed by China Machinery Industry Federation.
This standard by the national earthmoving machinery Standardization Technical Committee (SAC/TC334) centralized.
This standard is drafted by. Tianjin Institute of Mechanical Engineering.
Participated in the drafting of this standard. Xiamen, Xiamen Engineering Machinery Company Limited.
Drafters of this standard. Wu Yun Cai, Li Wei Ping.
This standard replaces the standards previously issued as follows.
--- GB/T 8595-1988, GB/T 8595-2001.
GB/T 8595-2008/ISO 10968.2004
Moving machinery operating device
1 Scope
This standard specifies the requirements and guidelines (the main driver for manipulating apparatus GB/T 8498 defined moving machinery chauffeur-driven manipulation
Remotely operated machines see ISO 15817.2005).
The standard for finger, hand or foot operated device provisions, but does not restrict other forms of manipulation, maneuvering position or manipulate actions
application. However, the layout of the recommended operating device should follow the general principles and requirements for safety and ergonomics of the driver.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 8420 moving machinery physical dimensions of operators and minimum operator space (GB/T 8420-2000, eqv
ISO 3411.1995)
GB/T 8498 Earth - moving machinery - Basic types - Identification and terms and definitions (GB/T 8498-2008, ISO 6165.2006, IDT)
GB/T 8593.1 moving machinery - Symbols for operator controls and other displays - Part 1. Common symbols (GB/T 8593.1-
1998, eqv ISO 6405-1.1991)
GB/T 8593.2 moving machinery - Symbols for operator controls and other displays - Part 2. Specific symbols for machines, equipment and accessories
No. (GB/T 8593.2-1998, eqv ISO 6405-2.1993)
GB/T 14781 earthmoving machinery mechanical steering wheel capacity (GB/T 14781-1993, eqv ISO 5010.1992)
Performance requirements and test methods GB/T 19929 moving machinery crawler machine brake system (GB/T 19929-2005,
ISO 10265.1998, MOD)
Performance requirements and test methods GB/T 21152 earthmoving machinery tires machines brake system (GB/T 21152-2007,
ISO 3450.1996, IDT)
GB/T 21935 earthmoving machinery comfort zone and reach for manipulation (GB/T 21935-2008, ISO 6682. 1986,
IDT)
GB/T 22356 earthmoving machinery keylock starting system (GB/T 22356-2008, ISO 10264.1990, IDT)
GB/T 22359 moving machinery - Electromagnetic compatibility (GB/T 22359-2008, ISO 13766.2006, IDT)
ISO 15817.2005 Earth-moving machinery - Safety requirements for remote control
ISO 15998.2008 Earth-moving machinery applications electronic components machine control system (MCS) functional safety and performance criteria
test
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1
Manipulation device (see GB/T 21935) and drivers frequently used continuously.
Note. The main operating device as follows.
a) Host.
1) Steering;
GB/T 8595-2008/ISO 10968.2004
......
|