GB/T 33594-2017 (GB/T33594-2017, GBT 33594-2017, GBT33594-2017) & related versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | See Detail | Status | Similar PDF |
| GB/T 33594-2017 | English | 145 |
Add to Cart
|
0-9 seconds. Auto delivery.
|
Charging cables for electric vehicles
|
GB/T 33594-2017
| Valid |
GBT 33594-2017
|
Buy with any currencies (Euro, JPY, KRW...): GB/T 33594-2017 Preview this PDF: GB/T 33594-2017
GB/T 33594-2017: PDF in English (GBT 33594-2017)
GB/T 33594-2017
GB
NATIONAL STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 29.060.20
K 13
Charging cables for electric vehicles
ISSUED ON. MAY 12, 2017
IMPLEMENTED ON. DECEMBER 01, 2017
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China;
Standardization Administration of the People's Republic of
China.
3. No action is required - Full-copy of this standard will be automatically &
immediately delivered to your EMAIL address in 0~60 minutes.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Terms and definitions ... 6
4 Use features ... 8
5 Code, model and product expression method ... 9
6 Technical requirements ... 12
7 Cable marking ... 21
8 Insulated core identification ... 21
9 Routine test ... 23
10 Sample test ... 24
11 Type test ... 26
12 Inspection rules ... 42
13 Packaging, transportation and storage ... 45
Appendix A (Normative) Insulation hardness determination ... 46
Appendix B (Normative) Sheath tear resistance test method ... 49
Appendix C (Normative) Saponification test ... 52
Foreword
This standard was drafted in accordance with the rules given GB/T 1.1-2009.
This standard was proposed by the China Electrical Equipment Industry
Association.
This standard shall be under the jurisdiction of the National Power Cable
Standardization Technical Committee (SAC/TC 213).
The drafting organizations of this standard. Shanghai Electric Cable Research
Institute, Shanghai National Cable Testing Center Co., Ltd., China Quality
Certification Center, Wuxi Xinhongye Special Plastic Cable Co., Ltd.,
Guangdong OMG Conducting Technology Co., Ltd., Hengyang Hengfei Cable
Co., Ltd., Zhongtian Technology and Equipment Cable Co., Ltd., Wuxi Pearl
Cable Co., Ltd., Zhongli Technology Group Co., Ltd., Jinbei Electric Co., Ltd.,
Jinlongyu Group Co., Ltd., Shenzhen WOER Heat-Shrinkage Material Co., Ltd.,
Jiangsu Hengtong Power Cable Co., Ltd., Guangzhou Nanyang Cable Co.,
Ltd., Far East Cable Co., Ltd., Zhejiang Wanma Co., Ltd., Jiangsu
Shangshang Cable Group Co., Ltd., Changzhou Marine Cable Co., Ltd.,
Yangzhou Yaguang Cable Co., Ltd., DEKRA Quality Certification (Shanghai)
Co., Ltd., Guangdong Institute of Product Quality Supervision and Inspection,
Hunan Changgao High Voltage Switchgear Corporation.
The main drafters of this standard. Li Na, Zhu Yonghua, Qu Wenbo, Xiao
Jidong, Yang Juanjuan, Xie Zhiguo, Guan Lili, Guan Yong, Liu Yaoxun, Wang
Fushan, Xu Pengfei, Yu Jinhua, Sun Jianyu, Yang Zhiqiang, Lu Zhicai, Zhang
Qiang, Guan Xinyuan, Wang Zhihui, Wang Chuanbin, Liu Huanxin, Zhu Jun,
Gao Jun, Jia Yunpeng, Hong Jian, Liu Weihai, Lu Shenggan, Wang Can.
Charging cables for electric vehicles
1 Scope
This standard specifies the use characteristics, expression methods, technical
requirements, marking, test methods and requirements, inspection rules and
cable packaging, transportation and storage of charging cables for electric
vehicles.
This standard applies to the charging cables (which may include the signal or
control core) having a rated voltage AC 450/750 V and below and DC 1.0 kV
and below for the conductive charging device of electric vehicles.
2 Normative references
The following documents are essential to the application of this document. For
the dated documents, only the versions with the dates indicated are applicable
to this document; for the undated documents, only the latest version (including
all the amendments) are applicable to this Standard.
GB/T 1690-2010 Rubber, vulcanized or thermoplastic - Determination of the
effect of liquids
GB/T 2423.3-2006 Environmental testing for electric and electronic
products - Part 2. Testing method test Cab. Damp heat steady state
GB/T 2951.11-2008 Common test methods for insulating and sheathing
materials of electric and optical cables - Part 11. Methods for general
application - Measurement of thickness and overall dimensions
GB/T 2951.12-2008 Common test methods for insulating and sheathing
materials of electric and optical cables - Part 12. Methods for general
application - Thermal ageing methods
GB/T 2951.13-2008 Common test methods for insulating and sheathing
materials of electric and optical cables - Part 13. Methods for general
application - Measurement for determining the density - Water
GB/T 2951.14-2008 Common test methods for insulating and sheathing
materials of electric and optical cables - Part 14. Methods for general
application - Test at low temperature
GB/T 2951.21-2008 Common test methods for insulating and sheathing
materials of electric and optical cables - Part 21. Methods specific to
elastomeric compounds - Ozone resistance, hot set and mineral
GB/T 2951.31-2008 Common test methods for insulating and sheathing
materials of electric and optical cables - Part 31. Methods specific to PVC
compounds - Pressure test at high temperature - Test for cracking
resistance
GB/T 3048.4-2007 Test methods for electrical properties of electric cables
and wires - Part 4. Test of DC resistance of conductors
GB/T 3048.5-2007 Test methods for electrical properties of electric cables
and wires - Part 5. Test of insulation resistance
GB/T 3048.8-2007 Test methods for electrical properties of electric cables
and wires - Part 8. AC voltage test
GB/T 3048.9-2007 Test methods for electrical properties of electric cables
and wires - Part 9. Spark test of insulated cores
GB/T 3048.14-2007 Test methods for electrical properties of electric cables
and wires - Part 14. DC voltage test
GB/T 3956-2008 Conductors of insulated cables
GB/T 4909.2 Test methods for bare wires - Part 2. Measurement of
dimensions
GB/T 5013.2-2008 Rubber insulated cables of rated voltages up to and
including 450/750V - Part 2. Test methods
GB/T 16422.2-2014 Plastics - Methods of exposure to laboratory light
sources - Part 2. Xenon-arc sources
GB/T 17650.1-1998 Test on gases evolved during combustion of materials
from cables - Part 1. Determination of the amount of halogen acid gas
GB/T 17650.2-1998 Test on gases evolved during combustion of materials
from cables - Part 2. Determination of degree of acidity of gases by
measuring pH and conductivity
GB/T 17737.1-2000 Radio-frequency cables - Part 1. Generic specification -
General, definitions, requirements and test methods
GB/T 18380.12-2008 Test on electric and optical fiber cables under fire
conditions - Part 12. Test for vertical flame propagation for a single insulated
wire or cable - Procedure for 1kW pre-mixed flame vertical spread test
method
GB 29518-2013 Diesel engines NOx reduction agent - Aqueous urea
solution (AUS 32)
JB/T 8137 (all parts) Delivery drums for electric wires and cables
JB/T10696.6-2007 Test methods for determining mechanical physical and
chemical properties of electric cables and wires - Part 10. Rat gnawing test
ISO 48.2010 Rubber, vulcanized or thermoplastic - Determination of
hardness (hardness between 10 IRHD and 100 IRHD)
IEC 60684-2. 2011 Flexible insulation sleeving - Part 2. Methods of test
3 Terms and definitions
The terms and definitions as defined in GB/T 2900.10 AND the following terms
and definitions apply to this document.
3.1
Nominal value
It refers to the specified magnitude which is often used in forms.
Note. In this standard, the magnitude which is usually introduced by the
nominal value is verified through measurement under the consideration of
the specified tolerance.
3.2
Median value
It refers to the middle value of the several values obtained from test AND
arranged in the order of ascending (or descending) if the number of values
is odd, OR the average of the middle two values if the number of values is
even.
3.3
Rated voltage
It refers to the reference voltage which is used for cable design, use and
electrical performance test.
5 Code, model and product expression method
5.1 Code
5.1.1 Product code
EV. electric vehicle
AC (can be omitted). for AC charging
DC. for DC charging
5.1.2 Conductor structure
(Omitted). the fifth copper conductor
R. the 6th copper conductor
5.1.3 Insulation material code
S. Thermoplastic elastomer at continuous working temperature 70 °C (TPE)
S90. Thermoplastic elastomer at continuous working temperature 90 °C (TPE)
E. The ethylene-propylene rubber or similar synthetic rubber at continuous
working temperature 90 °C
EY. Rigid ethylene-propylene rubber or similar halo...
......
| Standard ID | GB/T 33594-2017 (GB/T33594-2017) | | Description (Translated English) | Charging cables for electric vehicles | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K13 | | Classification of International Standard | 29.060.20 | | Word Count Estimation | 39,341 | | Date of Issue | 2017-05-12 | | Date of Implementation | 2017-12-01 | | Quoted Standard | GB/T 1690-2010; GB/T 2423.3-2006; GB/T 2900.10; GB/T 2951.11-2008; GB/T 2951.12-2008; GB/T 2951.13-2008; GB/T 2951.14-2008; GB/T 2951.21-2008; GB/T 2951.31-2008; GB/T 3048.4-2007; GB/T 3048.5-2007; GB/T 3048.8-2007; GB/T 3048.9-2007; GB/T 3048.14-2007; GB | | Drafting Organization | Shanghai Cable Research Center, Shanghai China Cable Testing Center Co., Ltd., China Quality Certification Center, Wuxi Xin Hongye Special Plastic Cable Co., Ltd., Guangdong Ogilvy & Mather Transmission Technology Co., Ltd., Hengyang Hengfei Cable Co., Ltd., transit technology Equipment Co., Ltd., Wuxi Pearl Cable Co., Ltd., Zhongli Technology Group Co., Ltd., Jinbei Electric Co., Ltd., Jinlongyu Group Co., Ltd., Shenzhen Wal-Mart Nuclear Materials Co., Ltd., Jiangsu Hengtong Power Cable Co., Guangzhou Ocean Cable Co., Ltd., Far East Cable Co., Ltd., Zhejiang Wanma Co., Ltd., Jiangsu Shangshang Cable Group Co., Ltd., Changzhou Marine Cable Co., Ltd., Yangzhou Yaguang Cable Co., Ltd., Dekai Quality Certification (Shanghai) Co., Research on Guangdong Product Quality Supervision and Inspection | | Administrative Organization | National Wire and Cable Standardization Technical Committee (SAC/TC 213) | | Proposing organization | China Electrical Appliances Industry Association | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, China National Standardization Administration Committee | | Summary | This standard specifies the characteristics, representations, technical requirements, logos, test methods and requirements, inspection rules, and packaging, transport and storage of cables for electric vehicle charging cables. This standard applies to electric vehicle conduction charging connection device with rated voltage AC 450/750 V and below, DC 1.0 kV and below charging cable (which can include signal or control wire core). |
|