Standard Briefing:Stadard ID: GB/T 18899-2023
Stadard Title: All dielectric self-supporting optical fibre cable
Price (USD): 679
Lead day (Deliver True-PDF English version): 6 days [Need to translate]
Status: ValidEvolution and Historical Versions:
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 18899-2023 | English | 679 |
Add to Cart
|
6 days [Need to translate]
|
All dielectric self-supporting optical fibre cable
| Valid |
GB/T 18899-2023
|
| GB/T 18899-2002 | English | 1039 |
Add to Cart
|
5 days [Need to translate]
|
All dielectric self-supporting optical fiber cable
| Obsolete |
GB/T 18899-2002
|
PDF Samples:
Basic Data: | Standard ID | GB/T 18899-2023 (GB/T18899-2023) | | Description (Translated English) | All dielectric self-supporting optical fibre cable | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | M33 | | Classification of International Standard | 33.180.10 | | Word Count Estimation | 33,368 | | Date of Issue | 2023-05-23 | | Date of Implementation | 2023-12-01 | | Older Standard (superseded by this standard) | GB/T 18899-2002 | | Issuing agency(ies) | State Administration for Market Regulation, National Standardization Management Committee | Contents, Scope, and Excerpt:GB/T 18899-2023: All dielectric self-supporting optical cables
ICS 33:180:10
CCSM33
National Standards of People's Republic of China
Replacing GB/T 18899-2002
All-Dielectric Self-Supporting Optical Cable
Released on 2023-05-23
2023-12-01 implementation
State Administration for Market Regulation
Released by the National Standardization Management Committee
table of contents
Preface III
1 Range 1
2 Normative references 1
3 Terms and Definitions 2
4 Abbreviations 3
5 Model and naming 3
6 Requirements 5
7 Test method 13
8 Inspection rules 20
9 Packaging, transportation and storage 22
Appendix A (informative) Correspondence between GB/T 9771 and IEC standards and ITU-T standards for single-mode fiber codes 24
Appendix B (Informative) Typical Structure of Optical Cable 25
Appendix C (Informative) Technical Requirements for Tracking Resistance Sheath Material 26
Appendix D (Normative) Tracking Resistance Test 27
Appendix E (Informative) ADSS Installation Guidelines 28
Reference 29
foreword
This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents"
drafting:
This document replaces GB/T 18899-2002 "Full Dielectric Self-supporting Optical Cable": Compared with GB/T 18899-2002, except for structural adjustment and
Apart from editorial changes, the main technical changes are as follows:
a) The structural type composition of ADSS has been changed (see Figure 1 in 5:2, Figure 1 in 4:2 of the:2002 edition);
b) The code of the application scenario of the optical cable is added (see 5:2:3);
c) The index requirements for optical fiber ribbons have been added (see 6:1:3:2);
d) The requirements for the inner sheath are added, especially the requirements for the thickness of the inner sheath of optical cables with a span greater than 800m (see 6:1:11);
e) Deleted multimode fiber and its index requirements (see 6:4:1, 8:1:2 of the:2002 edition);
f) The requirements for fiber attenuation index after cabling are added (see 6:4:1:3);
g) Changed the requirements for the breaking force index of the optical cable (see Table 5 in 6:4:3:2, Table 4 in 8:3:2 of the:2002 edition);
h) Changed the classification requirements for decay temperature characteristics (see Table 7 in 6:4:4:2, Table 6 in 8:4:2 of the:2002 edition);
i) The test method for combustion performance has been changed (see 6:4:4:6, 9:6:6 of the:2002 edition);
j) Added requirements and test methods for outer sheath wear and loose tube bending (see 7:3:1);
k) Changed the acceptance requirements for the impact test (see 7:5:5, 8:3:4 of the:2002 edition);
l) Changed the acceptance requirements for repeated bending tests (see 7:5:6, 8:3:5 of the:2002 edition);
m) Added the bending test under tension (see 7:5:11);
n) Changed the acceptance requirements for wind-induced vibration tests (see 7:5:12, 8:3:9 of the:2002 edition);
o) Changed the acceptance requirements for galloping tests (see 7:5:13, 8:3:10 of the:2002 edition);
p) Changed the acceptance requirements for pulley test (see 7:5:14, 8:3:11 of the:2002 edition);
q) The test standard for the creep test has been changed (see 7:5:15, 9:5:8 of the:2002 edition);
r) Added the creep test under alternating tension (see 7:5:15:3);
s) The test requirements and test methods for UV resistance have been changed (see 7:6:6, 8:4:9 of the:2002 edition):
Please note that some contents of this document may refer to patents: The issuing agency of this document assumes no responsibility for identifying patents:
This document is proposed by the Ministry of Industry and Information Technology of the People's Republic of China:
This document is under the jurisdiction of the National Communications Standardization Technical Committee (SAC/TC485):
This document is drafted by: China Information and Communication Technology Group Co:, Ltd:, China Communications Service Consulting Design and Research Institute Co:, Ltd:, China Electric Power Division
Research Institute Co:, Ltd:, Shanghai National Cable Testing Co:, Ltd:, China Academy of Information and Communications Technology, Jiangsu Zhongtian Technology Co:, Ltd:, Jiangxi
Sutong Optical Information Co:, Ltd:, Jiangsu Hengtong Optoelectronics Co:, Ltd:
The main drafters of this document: Liu Cheng, Qi Qingqing, Yang Hongwei, Guo Yi, Xin Peng, Yu Jing, Hou Jiyong, Liu Tai, Hu Guohua, Xie Shuhong, Zhai Qingshi,
Ji Zhong, Shen Jiaming, Shi Huiping, Ni Haibin, Ma Shankui, Guo Kun:
The release status of previous versions of this document and the documents it replaces are as follows:
---It was first published as GB/T 18899-2002 in:2002;
--- This is the first revision:
All-Dielectric Self-Supporting Optical Cable
1 Scope
This document specifies the model, designation, requirements, test methods, and inspection of all-dielectric self-supporting optical cables (ADSS optical cables, hereinafter referred to as optical cables):
Regulations, packaging, transport and storage:
This document is applicable to the design, development, production and testing of ADSS optical cables for communication lines used in overhead power transmission systems, and is also applicable to lightning-prone
ADSS optical cables in aerial laying environments such as strips and large spans:
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text: Among them, dated references
For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
this document:
GB/T 2423:24-2013 Environmental testing - Part 2: Test method Test Sa: Simulation of solar radiation on the ground and its test
Guidelines
GB/T 2951:11-2008 General test methods for insulation and sheath materials of electric and optical cables Part 11: General test methods
Thickness and Dimensions Measurement - Mechanical Properties Test (IEC 60811-1-1:2001, IDT)
GB/T 2952 (all parts) Cable outer sheath
GB/T 6995:2-2008 Wire and Cable Identification Marking Method Part 2: Standard Colors
GB/T 7424:21-2021 General Specification for Optical Cables Part 21: Basic Test Methods for Optical Cables-Mechanical Performance Test Methods
GB/T 7424:22-2021 General Specification for Optical Cables Part 22: Basic Test Methods for Optical Cables-Environmental Performance Test Methods
GB/T 7424:23-2021 General Specification for Optical Cables Part 23: Basic Test Methods for Optical Cables-Test Methods for Optical Cable Components
GB/T 8170 Numerical rounding off rules and expression and determination of limit values
GB/T 9771:1 Single-mode fiber for communication Part 1: Characteristics of non-dispersion-shifted single-mode fiber
GB/T 9771:2 Single-mode optical fiber for communication Part 2: Cut-off wavelength shifted single-mode optical fiber
GB/T 9771:3 Single-mode optical fiber for communication Part 3: Characteristics of non-dispersion-shifted single-mode optical fiber with extended wavelength range
GB/T 9771:5 Single-mode fiber for communication Part 5: Characteristics of non-zero dispersion-shifted single-mode fiber
GB/T 15065 Black polyethylene plastic for wire and cable
GB/T 15972:20 Specifications for test methods for optical fibers - Part 20: Measurement methods and test procedures for dimensional parameters - Optical fiber geometry
parameter
GB/T 15972:22 Specifications for Test Methods of Optical Fibers Part 22: Measurement Methods and Test Procedures for Dimensional Parameters - Length
GB/T 15972:40 Specifications for test methods of optical fibers - Part 40: Measurement methods and test procedures for transmission characteristics and optical characteristics -
attenuation
GB/T 15972:42 Optical Fiber Test Method Specifications Part 42: Measurement Methods and Test Procedures for Transmission Characteristics - Wavelength Dispersion
GB/T 15972:44 Specifications for test methods of optical fibers - Part 44: Measurement methods and test procedures for transmission characteristics and optical characteristics -
cut-off wavelength
GB/T 15972:45 Specifications for test methods of optical fibers - Part 45: Measurement methods and test procedures for transmission characteristics - Mode field diameter
GB/T 15972:48 Specifications for test methods of optical fibers - Part 48: Measurement methods and test procedures for transmission characteristics and optical characteristics -
Polarization Mode Dispersion
......
|