Q/BQB 616-2023 (Q/BQB 616-2018) PDF EnglishUS$125.00 · In stock · Download in 9 seconds
Q/BQB 616-2018: Thick steel plate for high strength welded structure Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Q/BQB 616: Historical versions
Similar standardsQ/BQB 616-2018: Thick steel plate for high strength welded structure---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/QBQB616-2018ENTERPRISE STANDARD OF BAOSTEEL CO., LTD. Thick steel plate for high strength welded structure Issued on. January 30, 2018 Issued by. Baoshan Iron and Steel Co., Ltd. Table of ContentsSelf-commitment... 3 Technical indicator 1... 4 1 General technical requirements... 5 2 Dimensions, shapes, weights and tolerances... 5 3 Technical requirements... 5 4 Inspections and tests... 7 Self-commitment The contents of the Q/BQB 616-2018 "Thick steel plate for high strength welded structure" that is prepared and published by our company are in compliance with the relevant national laws and regulations, mandatory standards and relevant industrial policies. In accordance with the prescribed procedures, it is approved and issued by the corporate legal representative. The products that are produced by our company meet the technical requirements specified in this Standard. The reference number to the standard is indicated on the corresponding product package. Our company is responsible for the truthfulness, accuracy and legality of the proclaimed public information. Our company takes full legal responsibility for the consequences of the implementation of this Standard. Baoshan Iron and Steel Co., Ltd. January 30, 2018 Thick steel plate for high strength welded structure This is an indicator requirement document of technical indicator 1.1 General technical requirementsUnless otherwise specified in this Standard, the steel plates that are supplied in accordance with this Standard shall comply with the corresponding requirements of the Q/BQB 600.2 Dimensions, shapes, weights and tolerancesThe higher unevenness accuracies PF.S1 and PF.S2 of the trimmed steel plates shall comply with the requirements of Table 2.Other dimensions, shapes, weights and tolerances shall comply with the provisions of Q/BQB 600. Table 2 Measuring length Higher unevenness accuracy tolerances at different levels, not greater than PF.S1 PF.S2 1000mm 7mm 5mm3 Technical requirements3.1 The steel’s designations and chemical compositions (smelting analysis) shall comply with the requirements of Table 3. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. |
