Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 42395.1-2023 PDF English

US$200.00 · In stock · Download in 9 seconds
GB/T 42395.1-2023: Ergonomics - Sound quality limits and test methods for household appliance noise - Part 1: Refrigerator
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
Standard IDUSDBUY PDFDeliveryStandard Title (Description)Status
GB/T 42395.1-2023200 Add to Cart Auto, 9 seconds. Ergonomics - Sound quality limits and test methods for household appliance noise - Part 1: Refrigerator Valid

Similar standards

GB/T 40230.1   GB/T 36607   GB/T 36606   GB/T 45285   

GB/T 42395.1-2023: Ergonomics - Sound quality limits and test methods for household appliance noise - Part 1: Refrigerator


---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT42395.1-2023
GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 13.180 CCS A 25 Ergonomics - Sound quality limits and test methods for household appliance noise - Part 1: Refrigerator ISSUED ON: MARCH 17, 2023 IMPLEMENTED ON: OCTOBER 1, 2023 Issued by: State Administration for Market Regulation; Standardization Administration of the PRC.

Table of Contents

Foreword ... 3 Introduction ... 4 1 Scope ... 5 2 Normative references ... 5 3 Terms and definitions ... 5 4 Sound quality limit requirements for noise ... 6 5 Test methods ... 7 Ergonomics - Sound quality limits and test methods for household appliance noise - Part 1: Refrigerator

1 Scope

This document gives the sound quality limit requirements and test methods for refrigerator noise. This document applies to household refrigerators. This document does not apply to commercial refrigerators.

2 Normative references

The contents of the following documents, through normative references in this text, constitute indispensable provisions of this document. Among them, for dated references, only the edition corresponding to that date applies to this document. For undated references, the latest edition (including all amendments) applies to this document. GB/T 4214.1-2017 Test method for noise of household and similar electrical appliances - General requirements GB/T 6882-2016 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms ISO 532-2:2017 Acoustics - Methods for calculating loudness - Part 2: Moore- Glasberg method

3 Terms and definitions

The following terms and definitions apply to this document. 3.1 Sound quality The suitability of sound for a specific technical goal or task connotation. 3.2 Loudness Note: If the refrigerator does not have the defrosting function, it only needs to meet the condition a).

5 Test methods

5.1 Test acoustic environment The sound quality test of refrigerator noise shall be carried out in a hemi-anechoic room. The background noise shall meet the requirements in 5.2 of GB/T 6882-2016. 5.2 Measuring instruments Measuring instruments shall comply with the requirements in Clause 5 of GB/T 4214.1- 2017. 5.3 Test conditions 5.3.1 Sample machine location and installation Place the sample machine at the geometric center of the ground of the test site; adjust the foot to the lowest level of noise generation. Movable parts (such as food racks or ice trays) in the sample machine need to be fastened in an appropriate way, to avoid additional noise caused by excited vibrations. An acoustic reflector shall be provided at the rear of the sample machine. The acoustic reflector shall meet the following requirements: - The reflector is (10±5)mm from the rear of the sample machine; is perpendicular to the ground; see Figure 1; - The size of the reflector shall be larger than the projected size of the rear of the sample machine; - The sound absorption coefficient of the reflector shall be less than 0.06. 5.3.2 Operating conditions The sample machine shall be run with no load. All doors (or covers) shall be closed. The thermostat shall be set as follows: - Refrigerator: 5 °C; - Freezer: -22 °C; - Other function rooms: System default temperature. 5.3.3 Environmental conditions The climatic conditions of the test environment shall meet the following requirements: - Temperature: 20 °C~26 °C; - Relative humidity: 30%~70%; - Atmospheric pressure: 86 kPa~106 kPa. 5.3.4 Test conditions 5.3.4.1 Daily operation mode After the sample machine is equipped according to the requirements of 5.3.1 and 5.3.2 AND operated for at least 16 h, it is tested in a stable operation period. During the test, if the temperature in the refrigerator reaches the temperature set by the thermostat AND the machine stops, the test shall be interrupted at this time. After the compressor restarts for 2 min, the test shall be carried out again. Note: If the sample machine is equipped with a user-operable controller, within a certain period of time, it can control the temperature change of the sample machine; such as the switch of functions such as quick cooling, quick freezing, and holidays; so it is in an off state. 5.3.4.2 Defrost mode After the sample machine is equipped according to the preset conditions of use AND has been running for at least 16 h, turn on the defrost mode. During the recovery period after defrosting, start the test 5 min after the compressor is started. 5.3.5 Microphone position Place the microphone at the center of the front of the sample machine; 500 mm from the refrigerator and 1500 mm from the ground; as shown in Figure 1. ......

Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Image 1     Image 2     Image 3     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of English version of GB/T 42395.1-2023 be delivered?Answer: The full copy PDF of English version of GB/T 42395.1-2023 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB/T 42395.1-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 42395.1-2023_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 42395.1-2023 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

How to buy and download a true PDF of English version of GB/T 42395.1-2023?

A step-by-step guide to download PDF of GB/T 42395.1-2023_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 42395.1-2023".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9