GB/T 40182-2021 PDF EnglishUS$170.00 · In stock · Download in 9 seconds
GB/T 40182-2021: Guideline of determining plasticized materials in toys or parts of toys that can be placed in the mouth Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB/T 40182-2021: Guideline of determining plasticized materials in toys or parts of toys that can be placed in the mouth---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT40182-2021 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 97.200.50 CCS Y 57 Guideline of determining plasticized materials in toys or parts of toys that can be placed in the mouth ISSUED ON: MAY 21, 2021 IMPLEMENTED ON: MAY 21, 2021 Issued by: State Administration for Market Regulation; Standardization Administration of PRC. Table of ContentsForeword ... 3 1 Scope ... 4 2 Normative references ... 4 3 Terms and definitions ... 4 4 Judgment of plasticized materials ... 6 5 Judgment of accessible ... 6 6 Judgment of toys or toy parts that can be placed in the mouth ... 7 7 Judgment summary ... 9 Appendix A (Informative) Examples of toys that can be placed in the mouth . 11 Appendix B (Informative) Flow chart of judging selection of plasticizer test for toy products ... 14 References ... 16 Guideline of determining plasticized materials in toys or parts of toys that can be placed in the mouth1 ScopeThis document provides guideline of determining plasticized materials in toys or parts of toys that can be placed in the mouth. This document applies to all products and materials, which are designed or scheduled for use by children under the age of 14 when playing, as well as packaging materials, which are scheduled to be retained. Note: This document is the guideline of determining plasticized materials in toys or parts of toys that can be placed in the mouth, which are covered in 5.3.7 of GB 6675.1- 2014 "Toys safety - Part 1: Basic code".2 Normative referencesThe provisions in following documents become the provisions of this Standard through reference in this Standard. For the dated references, the subsequent amendments (excluding corrections) or revisions do not apply to this Standard; however, parties who reach an agreement based on this Standard are encouraged to study if the latest versions of these documents are applicable. For undated references, the latest edition of the referenced document applies. GB 6675.1-2014 Toys safety - Part 1: Basic code GB 6675.2 Safety of toys - Part 2: Mechanical and physical properties GB 6675.4-2014 Safety of toys - Part 4: Migration of certain elements GB/T 22048 Toys and children products - Determination of phthalate plasticizers in polyvinyl chloride plastic3 Terms and definitionsThe terms and definitions as defined in GB 6675.1-2014 and GB 6675.4-2014, as well as the following terms and definitions, apply to this document. 3.1 Toy All products and materials, which are designed or scheduled to be used by children under the age of 14 when playing. [Source: GB 6675.1-2014, 3.1] 3.2 Normal use The obvious way of playing with toys, according to the operating instructions of the toy (3.1), or according to the traditional or customary methods. [Source: GB 6675.1-2014, 3.16] 3.3 Reasonably foreseeable abuse The way of use of the toy in a method not recommended by the supplier, BUT may occur under normal circumstances, including the normal free behavior of children such as combining toys. Example: Disassemble, drop, or use the toy in a non-recommended way. [Source: GB 6675.1-2014, 3.17] 3.4 Accessible Toys (3.1) parts or parts are touched by any part before the shoulder of the touchable probe, as described in GB 6675.2. [Source: GB 6675.1-2014, 3.19] 3.5 Coating All material layers, which are formed or attached to the base material of the toy (3.1), including colored paint, varnish, raw lacquer, ink, polymer or other substances of similar nature, regardless of whether it contains metal particles OR through which method it attaches to the toy; it can be scraped off with a sharp blade. [Source: GB 6675.4-2014, 3.2] When considering possible exposure routes for toy products, it shall include swallowing, licking, sucking, prolonged contact with human skin, etc. After normal use according to GB 6675.2 or reasonably foreseeable abuse tests, carry out judgement of the accessible, in accordance with GB 6675.2. If the part is accessible OR can be touched by any part before the shoulder of the touchable probe, it is considered to be accessible. Note: GB 6675.2 stipulates that certain specific toy products need to be tested for reasonably foreseeable abuse for all age groups. Example: There is a sticker on a toy; the glue on the sticker is a plasticized material. After passing the reasonably foreseeable test of GB 6675.2, the glue is judged to be accessible. Since the glue and the attached paper cannot be effectively separated physically, it shall take sample as a whole. 5.2 Exemption Taking into account the normal and predictable behavior of children, if certain toys and toy parts can obviously exclude the possibility of swallowing, licking, sucking, prolonged contact with the skin, etc., due to their accessibility, function, mass, size or other characteristics, THEN, it is not considered accessible. Example 1: The wires which play the role of charging adaptor OR connect the external devices. Example 2: The exposed wires at the bottom of electric baby stroller, which has not been encapsulated. Example 3: Coating on the beam of a rocking device, such as a shaker. Example 4: The tires of baby carriages such as toy bicycles and electric baby stroller.6 Judgment of toys or toy parts that can be placed inthe mouth 6.1 Designed to be placed in the mouth Toys which are designed to be placed in the mouth, OR the toys or toy parts, whose detachable parts can be placed in the mouth, such as mouth-moving toys (such as harmonicas or whistles), inflatable toys, horns and other toy mouthpieces (including non-removable and removable mouthpieces), as shown in Table A.1 of Appendix A. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 40182-2021 be delivered?Answer: The full copy PDF of English version of GB/T 40182-2021 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 40182-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 40182-2021_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 40182-2021 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB/T 40182-2021?A step-by-step guide to download PDF of GB/T 40182-2021_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 40182-2021". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
