GB/T 39799-2021 PDF EnglishUS$155.00 · In stock · Download in 9 seconds
GB/T 39799-2021: Dimensions, Shape, Weight and Tolerances of Titanium and Titanium Alloy Bars and Wires Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB/T 39799-2021: Dimensions, Shape, Weight and Tolerances of Titanium and Titanium Alloy Bars and Wires---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT39799-2021 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 77.150.50 CCS H 04 Dimensions, Shape, Weight and Tolerances of Titanium and Titanium Alloy Bars and Wires ISSUED ON: MARCH 09, 2021 IMPLEMENTED ON: OCTOBER 01, 2021 Issued by: State Administration for Market Regulation; Standardization Administration of PRC. Table of ContentsForeword ... 3 1 Scope ... 4 2 Normative References ... 4 3 Terms and Definitions ... 4 4 Cross-Sectional Shape ... 5 5 Dimensions and Tolerances ... 6 6 Appearance ... 9 7 Weight ... 10 Appendix A (Informative) Density of Titanium and Titanium Alloy ... 11ForewordThis Document was drafted as per the rules specified in GB/T 1.1-2009 Directives for Standardization – Part 1: Structure and Drafting of Standards. Please note some contents of this Document may involve patents. The issuing agency of this Document shall not assume the responsibility to identify these patents. This Document was proposed by China Nonferrous Metals Industry Association. This Document shall be under the jurisdiction of National Technical Committee for Standardization of Nonferrous Metals (SAC/TC 243). Drafting organizations of this Document: Baoti Group Ltd.; Baoji Titanium Industry Co., Ltd.; China Nonferrous Metals Techno-Economic Research Institute; and AVIC Metal Test Technology Co., Ltd. Chief drafting staffs of this Document: Hu Zhijie, Feng Junning, Xie Chen, Zhang Jiangfeng, Ma Zhongxian, Bai Zhihui, Zhang Fang, Feng Yongqi, Gao Qi, and Jia Shuanxiao. Dimensions, Shape, Weight and Tolerances of Titanium and Titanium Alloy Bars and Wires1 ScopeThis Document specifies the cross-sectional shape, size and tolerance, appearance and weight of titanium and titanium alloy bars and wires. This Document is applicable to titanium and titanium alloy wires with a diameter of 0.1mm~7.0mm (hereinafter referred to as wire); titanium and titanium alloy round bars with a diameter of greater than 7.0mm~450.0mm (hereinafter referred to as round bars); titanium and titanium alloy square bars with the side length of 30.0mm~450.0mm (hereinafter referred to as square bars); titanium and titanium alloy rectangular bars with a thickness of 25.0mm~204.0mm and a width of 25.0mm~254.0mm (hereinafter referred to as rectangular bars) .2 Normative ReferencesThe following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) is applicable to this document. GB/T 8170 Rules of Rounding off for Numerical Values & Expression and Judgement of Limiting Values3 Terms and DefinitionsFor the purposes of this document, the following terms and definitions apply. 3.1 Roundness The cross-sectional shape of the round bar is close to the theoretical roundness. 3.2 Squareness The cross-sectional shapes of the square bars and rectangular bars are close to the theoretical squareness. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. |
