GB/T 39019-2020 PDF EnglishUS$170.00 · In stock · Download in 9 seconds
GB/T 39019-2020: Custom furniture - Technical requirements for composite assembly identification Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB/T 39019-2020: Custom furniture - Technical requirements for composite assembly identification---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT39019-2020GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 97.140 Y 81 Custom furniture - Technical requirements for composite assembly identification ISSUED ON: JULY 21, 2020 IMPLEMENTED ON: FEBRUARY 01, 2021 Issued by: State Administration for Market Regulation; Standardization Administration of the People’s Republic of China. Table of ContentsForeword ... 3 1 Scope ... 4 2 Normative references ... 4 3 Terms and definitions ... 4 4 Requirements ... 5 Appendix A (informative) Examples of identification content, identification position, electronic identification form ... 9 Appendix B (normative) List of relevant standards for symbols, codes, terms and measurement units ... 12 Custom furniture - Technical requirements for composite assembly identification1 ScopeThis Standard specifies the terms and definitions, and requirements for the composite assembly identification of custom furniture. This Standard applies to the composite assembly identification of custom furniture.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 16734 Names of Chinese main woods GB/T 18107 Hongmu GB/T 18513 Names of Chinese main imported woods GB/T 28202 Furniture industry terminology QB/T 2913.1 Term standards of finished panel furniture - Part 1: Term of cabinet & rack QB/T 2913.2 Term standards of finished panel furniture - Part 2: Term of table QB/T 2913.3 Term standards of finished panel furniture - Part 3: Term of Bed3 Terms and definitionsFor the purpose of this document, the terms and definitions defined in GB/T 28202, QB/T 2913.1, QB/T 2913.2, QB/T 2913.3 and the following apply. 3.1 composite assembly identification Clear indications that are made using marks, symbols, words or other signs on product parts and finished products, to facilitate the composite assembly of products. 4.5 Requirements for identification words and symbols 4.5.1 When the furniture products supplied to domestic users are marked in words, they shall be marked in Chinese. If it is marked in both Chinese and foreign languages at the same time, the Chinese shall be conspicuous and prominent, and the Chinese shall be placed before the foreign language. 4.5.2 The marks, symbols, words or other markings on the product shall not be easily damaged or faded. 4.5.3 The composite assembly process can be illustrated by diagrams, charts and operation procedure diagrams. 4.5.4 The symbols, codes, terms and measurement units in the identification shall comply with the provisions of the relevant standards (see Appendix B), and shall be consistent. 4.5.5 The diagrams, symbols and abbreviations shall be noted when they appear for the first time in the identification. 4.5.6 The Chinese characters, numbers and letters used in the identification of furniture products shall be clear and easy to identify. The Chinese characters used in the identification shall be standard Chinese. 4.5.7 The font height of the warning titles such as “Danger”, “Warning” and “Caution” in the warning words shall not be less than 4.9 mm, and the font height of the warning content shall not be less than 3.7 mm. It is advisable to use Hanyu Pinyin or foreign language at the same time. The Hanyu Pinyin and foreign language shall be smaller than the corresponding Chinese, and the font height shall not be less than 1.5 mm. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 39019-2020 be delivered?Answer: The full copy PDF of English version of GB/T 39019-2020 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 39019-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 39019-2020_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 39019-2020 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB/T 39019-2020?A step-by-step guide to download PDF of GB/T 39019-2020_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 39019-2020". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
