Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 38943.1-2020 PDF English

US$850.00 · In stock · Download in 9 seconds
GB/T 38943.1-2020: Earth-moving machinery--Electrical safety of machines utilizing electric drives and related components and systems - Part 1: General requirements
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
Standard IDUSDBUY PDFDeliveryStandard Title (Description)Status
GB/T 38943.1-2020850 Add to Cart Auto, 9 seconds. Earth-moving machinery--Electrical safety of machines utilizing electric drives and related components and systems - Part 1: General requirements Valid

Similar standards

GB/T 44257.1   GB/T 44257.2   GB/T 41495   GB/T 45375   

GB/T 38943.1-2020: Earth-moving machinery--Electrical safety of machines utilizing electric drives and related components and systems - Part 1: General requirements


---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT38943.1-2020
GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 53.100 P 97 GB/T 38943.1-2020 / ISO 14990-1.2016 Earth-Moving Machinery – Electrical Safety of Machines Utilizing Electric Drives and Related Components and Systems – Part 1.General Requirements (ISO 14990-1.2016, IDT) Issued on. JULY 21, 2020 Implemented on. NOVEMBER 1, 2020 Issued by. State Administration for Market Regulation; Standardization Administration of the People’s Republic of China.

Table of Contents

Foreword... 6 Introduction... 8 1 Scope... 9 2 Normative References... 10 3 Terms, Definitions and Abbreviated Terms... 12 3.1 Electric shock protection-related terms and definitions... 12 3.2 Control-related terms and definitions... 15 3.3 Electrical infrastructure-related terms and definitions... 15 3.4 Risk-related terms and definitions... 16 3.5 Miscellaneous terms and definitions... 18 3.6 Abbreviated terms... 18 4 General Requirements... 19 4.1 General... 19 4.2 Provisions for handling... 20 4.3 Provisions for transportation and storage... 20 4.4 Components and devices... 20 4.5 Intended operating environment... 20 4.6 Electrical source... 21 5 Protection against Electric Shock Hazards... 22 5.1 General... 22 5.2 Protection by enclosures... 22 5.3 Protection by insulation... 24 5.4 Protection against residual voltages... 24 5.5 Protection by barriers... 25 5.6 Protection by inaccessibility... 25 5.7 Special considerations for low voltage energy storage devices and related buses... 25 5.8 Prevention of touch voltage... 26 5.9 Protection by automatic disconnection of source... 26 5.10 Protection by equipotential bonding... 27 5.11 Protection by use of PELV... 32 6 Protection against Electrical Fire Hazards... 34 6.1 General... 34 6.2 Fire hazard assessment... 34 6.3 Prevention of ignition... 34 6.4 Minimizing the spread of fire... 34 7 Protection against Thermal Hazards... 34 8 Protection against Mechanical Hazards... 34 9 Protection against Abnormal Operation Hazards... 34 9.1 General... 34 9.2 Overcurrent protection (OCP)... 35 9.3 Abnormal temperature protection... 36 9.4 Earth (or chassis in the case of self-powered machines) fault/residual current protection ... 36 9.5 Protection against over-voltages due to lightning and to switching surges... 36 9.6 Protection against other abnormal operation hazards... 37 10 Electric Power Source... 37 10.1 Disconnection of source... 37 10.2 Prevention of unintended start-up... 39 10.3 External electrical charging... 39 11 Wiring... 40 11.1 General... 40 11.2 Conductors... 40 11.3 Insulation... 41 11.4 Conductor and cable ampacity... 41 11.5 Flexible cables... 41 11.6 Assemblies having sliding contacts... 42 11.7 Connections and routing... 44 11.8 Identification of conductors... 46 11.9 Wiring inside enclosures... 48 11.10 Wiring outside enclosures... 49 11.11 Ducts and boxes... 52 12 Electric Motors and Generators... 55 12.1 General... 55 12.2 Enclosures... 55 12.3 Dimensions... 55 12.4 Mounting and compartments... 55 12.5 Criteria for motor selection or design... 56 12.6 Overheating protection... 56 12.7 Overspeed protection... 56 13 Non-Motor Loads... 57 13.1 Accessories... 57 13.2 Local lighting... 57 14 Controls... 58 14.1 Control circuits... 58 14.2 Control functions... 59 14.3 Protective interlocks... 59 14.4 Control functions in the event of failure... 59 14.5 Operator interface and machine-mounted control devices... 63 14.6 Controlgear. location, mounting, and enclosures... 64 14.7 Access to low and high-voltage equipment... 68 15 Manuals and Technical Documentation... 68 15.1 General... 68 15.2 Information to be provided... 68 15.3 Documentation... 69 15.4 Overview diagrams and function diagrams... 69 15.5 Circuit diagrams... 69 15.6 Operator’s manual... 70 15.7 Maintenance manual and service literature... 70 15.8 Parts list... 71 16 Marking... 71 16.1 General... 71 16.2 Warning signs... 72 16.3 Functional identification... 73 16.4 Marking of equipment... 73 16.5 Reference designations... 73 16.6 Protective equipotential bonding terminals... 73 17 Tests... 73 17.1 General... 73 17.2 Protective equipotential bonding circuit continuity... 74 17.3 Conditions for protection by automatic disconnection of source... 75 17.4 Insulation resistance tests... 76 17.5 Voltage withstand tests... 76 17.6 Protection against residual voltages... 77 17.7 Functional tests... 77 17.8 Retesting... 77 17.9 IP test for high-voltage equipment... 77 Annex A (Informative) List of Significant Hazards... 78 Annex B (Normative) TN Systems - Protection against Indirect Contact... 80 Annex C (Informative) Explanation of Emergency Operation Functions... 84 Annex D (Informative) Comparison of Selected Requirements of GB/T 38943, UN ECE R100 and ISO 6469-3... 85 Bibliography... 90

Foreword

GB/T 38943 Earth-Moving Machinery - Electrical Safety of Machines Utilizing Electric Drives and Related Components and Systems consists of the following 3 parts. --- Part 1.General Requirements; --- Part 2.Particular Requirements for Externally-Powered Machine; --- Part 3.Particular Requirements for Self-Powered Machines. This Part is Part 1 of GB/T 38943. This Standard was drafted as per the rules specified in GB/T 1.1-2009. This Part used translation method to equivalently adopt ISO 14990-1.2016 Earth-Moving Machinery – Electrical Safety of Machines Utilizing Electric Drives and Related Components and Systems – Part 1.General Requirements. The Chinese documents that have consistent correspondence with the international documents referenced in this Part are as follows. --- GB/T 311.2-2013 Insulation co-ordination - Part 2.Application guide (IEC 60071-2.1996, MOD); --- GB/T 4208-2017 Degrees of protection provided by enclosure (IP code) (IEC 60529.2013, IDT) --- GB/T 4728.1-2018 Graphical symbols for electrical diagrams - Part 1.General information (IEC 60617 DB, MOD); ---- GB/T 5465.1-2009 Electrical equipment with the basic rules of graphic symbols - Part 1.Creation of symbol originals (IEC 60417 DB.2007-01, MOD); --- GB/T 7251.1-2013 Low-voltage switchgear and controlgear assemblies - Part 1.General rules (IEC 61439-1.2011, IDT); --- GB/T 11024.1-2019 Shunt capacitors for A.C. power systems having a rated voltage above 1 000 V - Part 1.General (IEC 60871-1.2014, MOD); --- GB/T 14048.1-2012 Low-voltage switchgear and controlgear - Part 1.General rules (IEC 60947-1.2011, MOD); --- GB/T 16935.1-2008 Insulation coordination for equipment within low-voltage systems - Part 1.Principles requirements and tests (IEC 60664-1.2007, IDT); --- GB/T 17299-1998 Earth-moving machinery - Minimum access dimensions (idt ISO 2860.1992); --- GB/T 19212.1-2016 Safety of power transformers, power supplies, reactors and similar products - Part 1.General requirements and tests (IEC 61558-1.2009, MOD); --- GB/T 25686-2018 Earth-moving machinery - Safety requirements for remote operator control systems (ISO 15817.2012, IDT); --- GB/T 34989-2017 Connectors - Safety requirements and tests (IEC 61984.2008, MOD). This Part was proposed by China Machinery Industry Federation. This Part shall be under the jurisdiction of National Technical Committee on Earth-Moving Machinery of Standardization Administration of China (SAC/TC 334). Drafting organizations of this Part. XCMG Construction Machinery; Longgong (Shanghai) Machine Manufacturing Co., Ltd.; Guangxi Liugong Machinery Co., Ltd.; Tianjin Research Institute of Construction Machinery Co., Ltd.; Inner Mongolia North Hauler Joint Stock Co., Ltd.; and Shaanxi Tonly Heavy Industries Co., Ltd. Chief drafting staffs of this Part. Song Tianjia, Zhang Hanbin, Cai Wen, Deng Yanfang, Li Laiping, Zhao Rong, and Xue Yanjie.

1 Scope

This Part of GB/T 38943 specifies general safety requirements for the electrical equipment and its components incorporated into earth-moving machines (EMMs) as defined in ISO 6165, and addresses the safety of operators, technicians, service/maintenance personnel and bystanders.

2 Normative References

The following documents are essential to the application of this Document. For the dated documents, only the versions with the dates indicated are applicable to this Document; for the undated documents, only the latest version (including all the amendments) is applicable to this Document.

3 Terms, Definitions and Abbreviated Terms

For the purposes of this document, the terms, definitions and abbreviated terms given in ISO 12100 and the following apply.

4 General Requirements

If factory-built, type-tested HV switchgear is employed it shall comply with applicable standards (e.g., IEC 62271-1, IEC 62271-200, and IEC 62271-201). The electrical equipment of the EMM shall be protected against or be tolerant of the ingress of harmful solids and liquids, including dust, acids, corrosive gases, and salts, that might be present in the operating environment.

5 Protection against Electric Shock Hazards

Live parts shall be contained within enclosures that comply with the relevant requirements of Clause 4, Clause 12 and Clause 14, and which provide protection against direct contact of at least IP2X or IPXXB.

6 Protection against Electrical Fire Hazards

IEC 60695-1-20, IEC 60695-1-21, and IEC 60695-1-30 provide guidance regarding flammability and ignitability of nonmetallic parts and materials. Component standards usually address these concerns, and they generally take precedence over the generic IEC 60695 standards.

7 Protection against Thermal Hazards

Protection against thermal hazards should be according to ISO 20474-1.

8 Protection against Mechanical Hazards

Protection against mechanical hazards should be according to GB/T 25607 and ISO 20474-1.

9 Protection against Abnormal Operation Hazards

Appropriate protection shall be provided on liquid-filled electrical equipment (e.g. transformers, reactors, and switchgear) to account for the effects of abnormal temperature, overpressure or leakage. ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Image 1     Image 2     Image 3     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of English version of GB/T 38943.1-2020 be delivered?Answer: The full copy PDF of English version of GB/T 38943.1-2020 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB/T 38943.1-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 38943.1-2020_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 38943.1-2020 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

How to buy and download a true PDF of English version of GB/T 38943.1-2020?

A step-by-step guide to download PDF of GB/T 38943.1-2020_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 38943.1-2020".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9