GB/T 37567-2019 PDF EnglishUS$150.00 · In stock · Download in 9 seconds
GB/T 37567-2019: Copper and copper alloy sheet and strip for building decoration Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB/T 37567-2019: Copper and copper alloy sheet and strip for building decoration---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT37567-2019NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 77.150.30 H 62 Copper and copper alloy sheet and strip for building decoration ISSUED ON: JUNE 04, 2019 IMPLEMENTED ON: MAY 01, 2020 Issued by: State Administration for Market Regulation; Standardization Administration of the People's Republic of China. Table of ContentsForeword ... 3 1 Scope ... 4 2 Normative references ... 4 3 Technical requirements ... 5 4 Test methods ... 10 5 Inspection rules ... 10 6 Marks, packaging, transport, storage and quality certificate ... 12 7 Order sheet (or contract) content ... 12ForewordThis Standard was drafted in accordance with the rules given in GB/T 1.1-2009. This Standard was proposed by China Nonferrous Metals Industry Association. This Standard shall be under the jurisdiction of National Technical Committee on Non-ferrous Metal of Standardization Administration of China (SAC/TC 243). Main drafting organizations of this Standard: Chinalco Luoyang Copper Processing Co., Ltd., Anhui Xinke Copper Industry Co., Ltd., Tongling Jinwei Copper Industry Co., Ltd., Ningbo Xingye Shengtai Group Co., Ltd., Shaoxing Quality and Technology Supervision and Inspection Institute, Anhui Chujiang Science and Technology New Materials Co., Ltd. Main drafters of this Standard: Zhu Yingli, Guo Xiaohui, Guo Huiwen, Zhao Wanhua, Li Jian, Ge Xiaoniu, Liu Qinglan, Mao Yaodong, Shao Ye, Liu Feng, Yu Ximeng, Du Xiyong, Sun Honggang, Ma Zichao. Copper and copper alloy sheet and strip for building decoration1 ScopeThis Standard specifies technical requirements, test methods, inspection rules, marks, packaging, transport, storage, quality certificate and content of order sheet (or contract) of copper and copper alloy sheet and strip for building decoration. This Standard is applicable to copper and copper alloy sheet and strip that are used to produce copper doors, copper tiles, bronze sculptures, roofing, roofs, exterior walls for building decoration (hereinafter referred to as the sheet and strip).2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 232, Metallic materials - Bend test GB/T 4340.1, Metallic materials - Vickers hardness test - Part 1: Test method GB/T 5121 (all parts), Methods for chemical analysis of copper and copper alloys GB/T 5231, Wrought Copper and Copper Alloys Chemical Composition Limits and Forms of Wrought Products GB/T 8170, Rules of rounding off for numerical values & expression and judgement of limiting values GB/T 8888, Wrought heavy non-ferrous metal products - Packing, marking, transporting and storing GB/T 26303.3, Measuring methods for dimensions and shapes of wrought copper and copper alloys - Part 3: Sheets and strips GB/T 34505-2017, Copper and copper alloy materials - Tensile testing at4 Test methods4.1 Chemical composition Analysis on chemical composition of the sheet and strip shall be performed according to GB/T 5121 (all parts) or YS/T 482 or YS/T 483. In arbitration, it shall be carried out according to provisions of GB/T 5121 (all parts). 4.2 Dimensions and allowable deviation Dimensions and allowable deviation testing of the sheet and strip shall be in accordance with GB/T 26303.3. 4.3 Mechanical properties Tensile test at room temperature of the sheet and strip shall be performed according to provisions of GB/T 34505-2017. Sample numbers are P01, P02, P03 in Table 3 of GB/T 34505-2017. Vickers hardness test is carried out according to provisions of GB/T 4340.1. 4.4 Bending performance Bending test of the sheet and strip is performed according to GB/T 232. 4.5 Surface quality Surface quality of the sheet and strip is inspected visually.5 Inspection rules5.1 Check and acceptance 5.1.1 Product shall be inspected by supplier to ensure product quality complies with provisions of this Standard. Supplier fills in quality certificate. 5.1.2 Purchaser shall inspect products received according to provisions of this Standard. If inspection results fail to meet requirements of this Standard and order sheet (or contract), it shall be proposed in written form to supplier and shall be solved by supplier and purchaser via negotiation. Objections to surface quality and size deviation shall be submitted within one month after products are received. Objections to other quality problems shall be submitted within three months after products are received. If arbitration is required, sampling for arbitration shall be performed by supplier and purchaser together. 5.2 Batching Bending performance Take any 2 pieces (rolls) from each batch. Take 1 sample along with rolling direction for each piece (roll). 3.5 4.4 Surface quality Piece by piece (roll by roll) 3.6 4.5 5.5 Determination of inspection results 5.5.1 Values of inspection results shall be rounded off according to provisions of GB/T 8170. Use rounded-off value comparison method to determine. 5.5.2 When chemical composition fails, this batch of products shall be rejected. 5.5.3 When dimensions, allowable deviation and surface quality fail, this piece (roll) shall be rejected. 5.5.4 When there is a sample in test results of mechanical properties, bending properties fail, it shall take samples double quantity from this batch of products (including products failed in previous inspection) to repeat rest. If re-test results meet requirements, this batch of products shall be accepted. If re-test results still fail, this batch of products shall be rejected or it is inspected piece by piece (roll by roll) by supplier. Only accepted products are delivered.6 Marks, packaging, transport, storage and qualitycertificate Product’s marks, packaging, transport, storage and quality certificate shall comply with provisions of GB/T 8888.7 Order sheet (or contract) contentOrder sheet (or contract) for products listed in this Standard shall include following information: a) product name; b) alloy designation or code; c) supply state; d) dimensions; e) weight; ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 37567-2019 be delivered?Answer: The full copy PDF of English version of GB/T 37567-2019 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 37567-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 37567-2019_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 37567-2019 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB/T 37567-2019?A step-by-step guide to download PDF of GB/T 37567-2019_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 37567-2019". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
