GB/T 37571-2019 PDF EnglishUS$150.00 · In stock · Download in 9 seconds
GB/T 37571-2019: Copper and Copper Alloy Strip for Relay Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB/T 37571-2019: Copper and Copper Alloy Strip for Relay---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT37571-2019GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 77.150.30 H 62 Copper and Copper Alloy Strip for Relay ISSUED ON: JUNE 4, 2019 IMPLEMENTED ON: MAY 1, 2020 Issued by: State Administration for Market Regulation; Standardization Administration of the People’s Republic of China. Table of ContentsForeword ... 3 1 Scope ... 4 2 Normative References ... 4 3 Technical Requirements ... 5 4 Test Methods ... 11 5 Inspection Rules ... 12 6 Marking, Packaging, Transportation, Storage and Quality Certificate ... 14 7 Order Form (or contract) Content ... 14ForewordThis Standard was drafted in accordance with the rules in GB/T 1.1-2009. This Standard was proposed by China Nonferrous Metals Industry Association. This Standard shall be under the jurisdiction of National Technical Committee 243 on Nonferrous Metals of Standardization Administration of China (SAC/TC 243). The drafting organizations of this Standard: Ningbo XINGYE SHENGTAI Group Co. Ltd.; Ningbo XINGYE XINTAI New Electronic Materials Co., Ltd.; Anhui XINKE Copper Industry Co., Ltd.; TONGLING JINVI Copper Corp.; KAIMEILONG Precision Copper Strip (Henan) Co., Ltd.; Jiangxi JPTK Science and Technology Co., Ltd.; Shaoxing Quality and Technology Supervision and Inspection Institute. The main drafters of this Standard: Jinjing, Shaoye, Liufeng, Ge Xiaoniu, Liu Qinglan, Liu Aikui, Hewei, Du Xiyong, Wu Xiaolong, Wang Dongya, Mao Yaodong, Liudong, Tang Junlie, Li Minghua, Wang Zhongxiang, Shi Kejun, Wangqun, Meng Fanjian, Zhao Pinxiao, Kong Hongtao. Copper and Copper Alloy Strip for Relay1 ScopeThis Standard stipulates the technical requirements, test methods, inspection rules, marking, packaging, transportation, storage, quality certificate and order form (or contract) content of copper and copper alloy strip for relay. This Standard is applicable to copper and copper alloy strip for relay (hereinafter referred to as strip).2 Normative ReferencesThe following documents are indispensable to the application of this document. In terms of references with a specified date, only versions with a specified date are applicable to this document. In terms of references without a specified date, the latest version (including all the modifications) is applicable to this document. GB/T 232 Metallic Materials - Bend Test; GB/T 351 Metallic Materials - Resistivity Measurement Method; GB/T 4340.1 Metallic Materials - Vickers Hardness Test - Part 1: Test Method; GB/T 5121 (all parts) Methods for Chemical Analysis of Copper and Copper Alloys; GB/T 5231 Designation and Chemical Composition of Wrought Copper and Copper Alloys; GB/T 8170 Rules of Rounding-off for Numerical Values & Expression and Judgement of Limiting Values; GB/T 8888 Wrought Heavy Non-ferrous Metal Products - Packing, Marking, Transportation, Storing and Certificate of Quality; GB/T 26303.3 Measuring Methods for Dimensions and Shapes of Wrought Copper and Copper Alloys - Part 3: Sheets and Strips; GB/T 32791 Electromagnetic (eddy-current) Examination Method for Electrical Conductivity of Copper and Copper Alloys; GB/T 34505-2017 Copper and Copper Alloy Materials - Tensile Testing at Room Temperature; YS/T 482 Methods for Analysis of Copper and Copper Alloys - The Atomic Emission Tensile sample shall comply with the stipulations in GB/T 34505-2017. The type of sample shall select P01 from Table 3 in GB/T 34505-2017. Test method of Vickers hardness of strip shall comply with the stipulations in GB/T 4340.1. 4.4 Bending Performance Bending performance of strip shall comply with the stipulations in GB/T 232. 4.5 Electrical Performance Electrical performance test of strip shall comply with the stipulations in GB/T 32791 or GB/T 351. Arbitration shall comply with the stipulations in GB/T 351. 4.6 Surface Quality Surface quality of strip shall receive visual inspection.5 Inspection Rules5.1 Inspection and Acceptance Inspection 5.1.1 Strip shall be inspected by the supply side, which shall guarantee that product quality complies with the requirements of this Standard and the order form (or contract). Moreover, quality certificate shall be filled out. 5.1.2 The demand-side shall inspect the received products in accordance with the stipulations in this Standard and the order form (or contract). If the inspection result does not comply with the requirements of this Standard and the order form (or contract), this shall be proposed to the supply-side in the written form; and solved by the demand- side and the supply-side through negotiation. Objections regarding surface quality and dimensional deviations shall be proposed within 1 month upon receiving the products. Other quality objections shall be proposed within 3 months upon receiving the products. If arbitration is needed, arbitration sampling shall be jointly conducted by the demand- side and the supply-side. 5.2 Group Batch Strip shall be submitted for acceptance inspection in batches. Each batch shall be constituted of strips of the same designation, status and specification. Generally speaking, the weight of each batch shall be not more than 4,500 kg (if that batch is under the same furnace No., then, batch weight may not be restricted). 5.3 Inspection Items 5.3.1 Each batch of strips shall receive inspection of chemical composition, dimensions and allowable deviations, bending performance and surface quality. 5.5.2 When the inspection result of chemical composition is disqualified, then, the batch of strips shall be determined as disqualified. 5.5.3 When dimensions, allowable deviations and surface quality are disqualified, the coil of strip shall be determined as disqualified. 5.5.4 When there are samples that are disqualified in the inspection result of mechanical properties, bending performance and electrical performance, take a double size of samples for re-inspection from that batch of strips (including the coil of strip that is disqualified in the previous inspection). If the re-inspection result is completely qualified, then, that batch of strips shall be determined as qualified. If the re-inspection result is still disqualified, then, that batch of strips shall be determined as disqualified. Or, the supply-side may inspect coil by coil, and deliver those that are qualified.6 Marking, Packaging, Transportation, Storage andQuality Certificate Products’ marking, packaging, transportation, storage and quality certificate shall comply with the stipulations in GB/T 8888.7 Order Form (or contract) ContentOrder form (or contract) content of materials listed in this Standard shall include the following content: a) Product name; b) Designation (code); c) Status of supply; d) Weight; e) Dimensional precision (common grade or high-precision grade); f) Either tensile test or hardness test (choose one from them); g) Electrical performance (when the demand-side requests); h) Serial No. of this Standard; i) Others. __________ END __________ ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 37571-2019 be delivered?Answer: The full copy PDF of English version of GB/T 37571-2019 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 37571-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 37571-2019_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 37571-2019 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB/T 37571-2019?A step-by-step guide to download PDF of GB/T 37571-2019_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 37571-2019". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
