Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 35349-2017 PDF English

US$145.00 · In stock · Download in 9 seconds
GB/T 35349-2017: Parking Brake Performance - Test Methods for Vehicles
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
Standard IDUSDBUY PDFDeliveryStandard Title (Description)Status
GB/T 35349-2017145 Add to Cart Auto, 9 seconds. Parking Brake Performance - Test Methods for Vehicles Valid

Similar standards

GB 36980.1   GB/T 36980   GB/T 33460   GB/T 45415   

GB/T 35349-2017: Parking Brake Performance - Test Methods for Vehicles

---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT35349-2017
GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 43.180 T 40 Parking Brake Performance Test Methods for Vehicles Issued on: DECEMBER 29, 2017 Implemented on: JULY 01, 2018 Issued by. General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration of PRC.

Table of Contents

Foreword ... 3 1 Scope ... 4 2 Normative References ... 4 3 Terms and Definitions ... 4 4 Test Conditions ... 5 5 Test Methods ... 5 Bibliography ... 10

Foreword

This Standard was drafted as per the rules specified in GB/T 1.1-2009. This Standard was proposed by and under the jurisdiction of National Technical Committee for Standardization of Operating Safe Technology and Testing Equipment (SAC/TC 364). Drafting organizations of this Standard. Foshan Analytical Instrument Co., Ltd., Electronic Division of China Measurement & Test Technology Research Institute, Zhejiang Jiangxing Auto Inspection Equipment Co., Ltd., Nanjing Institute of Measurement and Testing Technology, Guangdong Zhaoqing Huayu Machine Equipment Co., Ltd., and Gansu Institute of Metrology. Chief drafting staffs of this Standard. He Guihua, Yang Chunsheng, Tian Songpo, Xu Ziliang, Zhou Shensheng, Liu Feng, Yang Xiaocheng, and Gao Decheng. Parking Brake Performance Test Methods for Vehicles

1 Scope

This Standard specifies the parking brake performance test methods for vehicles. This Standard is applicable to all kinds of vehicles and combination of vehicles running on China’s roads.

2 Normative References

The following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) are applicable to this document. GB 7258 Safety Specifications for Power-Driven Vehicles Operating on Roads GB/T 13564 Roller Opposite Forces Type Automobile Brake Tester GB 21861 Items and Methods of Motor Vehicles Safety Technology Inspection GB/T 28529 Platform Brake Tester GB/T 28948 Commercial Vehicle – Front Towing Attachments GB 32087 Towing Devices for Light-Duty Vehicle

3 Terms and Definitions

The following terms and definitions and those ones stipulated in GB 7258 and GB 21816 are applicable to this document. 3.1 Parking brake performance The parking capability of vehicle on the ramp. 3.2 Parking ramp 5.3.2 Test methods 5.3.2.1 The tested vehicle is gliding at a speed of 5km/h ~ 10km/h; after placing the transmission in the neutral (the vehicle with automatic transmission can be placed in the Shift “D”); the vehicle can be driven to the flat slab steadily and upright. 5.3.2.2 When the parking brake shafts of the vehicle are on the flat slab; operate the parking brake control device as per the requirements of 5.1.2.2; then measure the parking brake force value. 5.3.2.3 When the tested wheels are on the flat slab, maintain the vehicle stationary; measure the static wheel load of each wheels. 5.3.2.4 The parking brake ratio is the percentage between the sum of the measured parking force of each parking shafts and the sum of all shafts (static) loads. 5.4 Traction test methods 5.4.1 Facilities requirements 5.4.1.1 The measurement range of the traction parking tester shall generally be no less than 7000daN (or meet the requirements of the instrument instruction manual). 5.4.1.2 The test area shall be flat, hard and clean cement or asphalt pavement; the pavement adhesion coefficient shall be no less than 0.7. 5.4.1.3 The traction devices on the front and rear parts of the vehicle, and their fixings shall not b e damaged, failed, broken or deformed to affect the normal use. 5.4.2 Test methods 5.4.2.1 Drive the tested vehicle into the test area, use service brake to stop the vehicle steadily. 5.4.2.2 Place the transmission of the tested vehicle into natural; operate the parking brake control device as per the requirement of 5.1.2.2; then release the service brake control. 5.4.2.3 Use the traction parking tester to tow the tested vehicle in the positive and negative directions; the direction of the traction force shall be parallel to the ground and parallel to the vehicle longitudinal centerline. 5.4.2.4 The instrument shall increase the traction force smoothly and slowly, the maximum traction force applied to the vehicle shall be calculated as per Formula (1). ......

Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Image 1     Image 2     Image 3     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of English version of GB/T 35349-2017 be delivered?Answer: The full copy PDF of English version of GB/T 35349-2017 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB/T 35349-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 35349-2017_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 35349-2017 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

How to buy and download a true PDF of English version of GB/T 35349-2017?

A step-by-step guide to download PDF of GB/T 35349-2017_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 35349-2017".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9