GB/T 33598-2017 PDF EnglishUS$75.00 · In stock · Download in 9 seconds
GB/T 33598-2017: Recycling of traction battery used in electric vehicle -- Dismantling specification Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB/T 33598-2017: Recycling of traction battery used in electric vehicle -- Dismantling specification---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT33598-2017 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 43.120 T 47 Recycling of Traction Battery Used in Electric Vehicle – Dismantling Specification Issued on. MAY 12, 2017 Implemented on. DECEMBER 1, 2017 Issued by. General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration of PRC. Table of ContentsForeword... 3 1 Scope... 4 2 Normative References... 4 3 Terms and Definitions... 4 4 Overall Requirements... 5 5 Operation Procedures... 6 6 Storage and Management... 9ForewordThis Standard was drafted as per the rules specified in GB/T 1.1-2009. This Standard was proposed by Ministry of Industry and Information Technology. This Standard shall be under the jurisdiction of National Technical Committee for Standardization of Automobile (SAC/TC 114). Drafting organizations of this Standard. Guangdong Brunp Recycling Technology Co., Ltd., Contemporary Amperex Technology Co., Ltd., China Automotive Technology & Research Center, Harbin Bartui Resources Recycling Technology Co., Ltd., GEM Co., Ltd., Hunan Brunp End-Of-Life Vehicles Recycling Co., Ltd., and Zhejiang Chaowei Chuangyuan Industrial Co., Ltd. Chief drafting staffs of this Standard. Yu Haijun, Zhao Zhongsong, Zhang Tongzhu, Xie Yinghao, Li Changdong, Ming Yubin, Li Zhizhuan, Zhan Yuanyuan, and Wei Yuzi. Recycling of Traction Battery Used in Electric Vehicle – Dismantling Specification1 ScopeThis Standard specifies the terms and definitions, general requirements, operating procedures, storage and management requirements for vehicle used waste battery packs (cases), and module dismantling work. This Standard is applicable to the vehicle used waste lithium-ion traction battery, metal hydride nickel traction battery pack (case), and module dismantling; it is not applicable to the vehicle used waste traction battery single-cell dismantling.2 Normative ReferencesThe following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) are applicable to this document. GB 5085.7 Identification Standards for Hazardous Wastes – General Specifications GB 18597 Standard for Pollution Control on Hazardous Waste Storage GB 18599 Standard for Pollution on the Storage and Disposal Site for General Industrial Solid Wastes GB/T 19596 Terminology of Electric Vehicles HJ 2025 Technical Specifications for Collection, Storage, Transportation of Hazardous Waste3 Terms and DefinitionsThe following terms and definitions and those ones stipulated in GB/T 19596 are applicable to this document. 3.1 Dismantling The operation dismantling the waste traction battery pack (case) and module.4 Overall Requirements4.1 General requirements 4.1.1 When designing the traction battery, the manufacturer shall consider the dismantlability, recyclability and other green design factors. 4.2 Equipment requirements 4.2.1 Shall equip with insulation gloves, protective gloves against the mechanical harm, safety helmet, insulation shoes (boots), protective mask, anti-electronic shock insulated rescue hook, and the like protective equipment. 4.3 Site requirements 4.3.1 The dismantling and storing sites shall have security facilities, such as fire facilities, alarm facilities, emergency facilities, etc. 4.3.2 The ground of dismantling and storing sites shall be hardened and anti-leakage; have the environmental protection facilities, for instance, the wastewater treatment system. 4.3.3 The dismantling and storing sites shall keep dry and ventilated, good light, and far away from the residential areas. 4.4 Safety requirements 4.4.1 Personnel safety 4.4.3 Dismantling security 4.4.3.1 Independent operation during the dismantling period shall be strictly forbidden, the dismantling work shall be carried out as per the prepared dismantling procedures and operation instructions. 4.4.3.4 After the dismantling, take insulation treatment against the waste traction battery module and single-cell.5 Operation Procedures5.1 Operation flow chart 5.1.1 The operating procedures of waste traction battery dismantling shall strictly follow three principles of safety, environmental protection and resource recycling. 5.2 Pre-treatment 5.2.1 Collect the waste traction battery’s model, manufacturer, voltage, nominal capacity, size, mass, and the like information. 5.2.2 For the liquid cooling traction battery, the special pumping system shall be adopted to discharge the coolant fully, and use special container to collect the coolant. 5.3 Dismantling 5.3.1 Traction battery pack (case) dismantling 5.3.1.3 After removal the shell, firstly dismantle brackets, partitions, and the like auxiliary fixing parts. 5.3.1.4 Use the insulation tools to remove the high-voltage wiring harness, circuit board, battery management system, high-voltage safety box and the like functional components. 5.3.2 Traction battery module dismantling 5.3.2.1 Special module-dismantling device shall be adopted to dismantle the module safely and environmentally. 5.3.2.2 Adopt the special lifting tools and lifting devices to lift the traction battery module to the dismantling tooling platform or module dismantling equipment inlet. 5.3.2.4 After removal of the shell, adopt the insulation tools to dismantle the conductor, connections strap and the like connection components, so that separate the single-cell of battery.6 Storage and Management6.1 Identify and classify the collected waste liquid and waste solid substance according to the provisions of GB 5085.7; which shall conform to the following provisions. 6.2 The single-cell of battery shall be stored uniformly; manually dismantling, discarding, landfilling or burning against the single-cell are prohibited. 6.3 The dismantled single-cell of battery, parts, materials shall use corresponding containers to store separately, identify, and perform routine inspection against them. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 33598-2017 be delivered?Answer: The full copy PDF of English version of GB/T 33598-2017 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 33598-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 33598-2017_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 33598-2017 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB/T 33598-2017?A step-by-step guide to download PDF of GB/T 33598-2017_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 33598-2017". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
