GB/T 27552-2021 PDF EnglishUS$215.00 · In stock · Download in 9 seconds
GB/T 27552-2021: Destructive tests on welds in metallic materials - Microhardness testing of welded joints Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 27552: Historical versions
Similar standardsGB/T 27552-2021: Destructive tests on welds in metallic materials - Microhardness testing of welded joints---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT27552-2021 Chi S d d B T PDF A d li P 1 f 15 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 25.160.40 CCS J 33 Replacing GB/T 27552-2011 Destructive Tests on Welds in Metallic Materials - Microhardness Testing of Welded Joints (ISO 9015-2:2016, Destructive Tests on Welds in Metallic Materials - Hardness Testing - Part 2: Microhardness Testing of Welded Joints, MOD) ISSUED ON: OCTOBER 11, 2021 IMPLEMENTED ON: MAY 1, 2022 Issued by: State Administration for Market Regulation; Standardization Administration of the People’s Republic of China. Table of ContentsForeword ... 3 1 Scope ... 5 2 Normative References ... 5 3 Terms and Definitions ... 5 4 Symbols and Abbreviations ... 6 5 General Rules ... 6 6 Specimen Preparation ... 6 7 Test Procedures ... 7 7.1 Rows of Indentations (Type-R test) ... 7 7.2 Individual Indentations (Type-E test) ... 9 8 Test Results ... 10 9 Test Report ... 10 Appendix A (informative) An Example of Hardness Test Report of Rows of Indentations (Type-R test) on Welded Joints ... 11 Appendix B (informative) An Example of Hardness Test Report of Individual Indentations (Type-E test) on Welded Joints ... 13 Bibliography ... 15ForewordThis document was drafted in accordance with the stipulations of GB/T 1.1-2020 Directives for Standardization - Part 1: Rules for the Structure and Drafting of Standardizing Documents. This document serves as a replacement of GB/T 27552-2011 Destructive Tests on Welds in Metallic Materials - Microhardness Testing of Welded Joints. In comparison with GB/T 27552- 2011, apart from structural adjustments and editorial modifications, the main technical changes are as follows: ---The expression of “Scope” is modified (see Chapter 1; Chapter 1 of Version 2011); ---GB/T 4340.1 is used to replace ISO 6507-1 (see Chapter 2; Chapter 2 of Version 2011); ---The Chapter “Terms and Definitions” is added (see Chapter 3); ---“Principle” is modified into “General Rules”; the requirements for the test temperature are modified (see Chapter 5; Chapter 3 of Version 2011); ---The relevant description of HV 5 in Table 2 is deleted. Figure 2 is modified: the NOTE in the clause is modified into the main text (see 7.1; 6.1 of Version 2011); ---The description of rows of indentations (Type-R test) and individual indentations (Type- E test) is modified (see 7.1 and 7.2; 6.1 and 6.2 of Version 2011); ---The expression of test report is modified (see Chapter 9; Chapter 8 of Version 2011); ---The reference of GB/T 39082 is added (see Bibliography). This document uses the re-drafting method in the modification and adoption of ISO 9015- 2:2016 Destructive Tests on Welds in Metallic Materials - Hardness Testing - Part 2: Microhardness Testing of Welded Joints. ---The Chapter “Terms and Definitions” is added. In comparison with ISO 9015-2:2016, the technical differences and the causes for these differences are as follows: ---GB/T 4340.1, which modifies and adopts the international standard, is used to replace ISO 6507-1; ---HV 5 in Table 2 is deleted to be consistent with the stipulations of the Scope; ---The position of H in Figure 2 is modified to be consistent with the description of the symbol H in Table 1. Please be noted that certain content of this document may involve patents. The institution issuing this document does not undertake the responsibility of identifying these patents. Destructive Tests on Welds in Metallic Materials - Microhardness Testing of Welded Joints1 ScopeThis document specifies the general rules, specimen preparation, test procedures, test results and test report of the microhardness testing of welded joints [the range of test force is generally: 0.98 N ~ < 49.03 N (HV 0.1 ~ < HV 5)] performed in accordance with GB/T 4340.1. This document is applicable to the cross-sectional microhardness test of welded joints of metallic materials with a large hardness gradient. NOTE: the hardness test shall ensure that the highest hardness and lowest hardness of the weld metal and the parent material on both sides (for dissimilar materials) can be measured. This document is not applicable to the hardness test with the test force greater than or equal to 49.03 N as specified in GB/T 2654. This document is not applicable to the Vickers hardness test of resistance spot, projection and seam welds as specified in GB/T 39082. This document is not applicable to the hardness test of narrow welded joint specimens, such as: laser and electron beam, whose hardness test shall be performed in accordance with GB/T 35085.2 Normative ReferencesThrough the normative references in this text, the contents of the following documents constitute indispensable clauses of this document. In terms of references with a specified date, only versions with a specified date are applicable to this document. In terms of references without a specified date, the latest version (including all the modifications) is applicable to this document. GB/T 4340.1 Metallic Materials - Vickers Hardness Test - Part 1: Test Method (GB/T 4340.1- 2009, ISO 6507-1:2005, MOD)3 Terms and DefinitionsThis document does not have terms or definitions that need to be defined.4 Symbols and AbbreviationsThe following symbols and abbreviations are applicable to this document (see Table 1).5 General RulesThe microhardness test shall comply with the requirements of GB/T 4340.1. The microhardness test may be performed through the mode of rows of indentations (Type-R test) or individual indentations (Type-E test). For welded joint types not included in the examples, test procedures applicable to the welded joint shall be selected. The test is generally carried out at an ambient temperature of 10 C ~ 35 C. For tests with a rigorous temperature requirement, the test temperature shall be (23 5) C.6 Specimen PreparationThe preparation of specimens shall comply with the requirements of GB/T 4340.1. The cross-section of the test piece shall be prepared by machining and generally perpendicular to the axis of the weld. The machining and subsequent specimen surface preparation shall be carried out with care, so as to ensure that the hardness of the tested surface is not affected by overheating or cold working. The surface of the specimen shall be prepared and eroded in a reasonable mode, so as to accurately determine the indentation diagonal lengths in different areas of the welded joint. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 27552-2021 be delivered?Answer: The full copy PDF of English version of GB/T 27552-2021 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 27552-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 27552-2021_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 27552-2021 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 27552-2021?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 27552-2021 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 27552-2021?A step-by-step guide to download PDF of GB/T 27552-2021_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 27552-2021". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
