GB/T 223.17-1989 PDF EnglishUS$85.00 · In stock · Download in 9 seconds
GB/T 223.17-1989: Methods for chemical analysis of iron, steel and alloy - The diantipyrylmethane photometric method for the determination of titanium content Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Similar standardsGB/T 223.17-1989: Methods for chemical analysis of iron, steel and alloy - The diantipyrylmethane photometric method for the determination of titanium content---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT223.17-1989 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA GB/T 223.17-89 Replacing GB 223.17-82 Method for chemical analysis of iron, steel and alloy The diantipyrylmethane photometric method for the determination of titanium content Issued on: FEBRUARY 21, 1989 Implemented on: JULY 01, 1990 Issued by. Ministry of Metallurgical Industry of the People’s Republic of China Table of Contents1 Subject content and application scope... 3 2 Method summary... 3 3 Reagents... 3 4 Analysis steps... 4 5 Calculation of analysis results... 6 6 Precision... 6 Additional Explanation... 7 Methods for chemical analysis of iron, steel and alloy The diantipyrylmethane photometric method for the determination of titanium content1 Subject content and application scopeThis standard specifies the determination of titanium content by using the diantipyrylmethane photometric method. This standard applies to the determination of titanium content in nickel base and iron-nickel based alloy. Determination range. 0.010% ~ 2.400%.2 Method summaryUse acid to dissolve the sample; in 1.2~3.6 mol/L hydrochloric acid medium, use ascorbic acid to reduce iron; the titanium and diantipyrylmethane will form a yellow complex; determine its absorbance. In color liquid, the vanadium content is less than 2 mg; the molybdenum content is less than 1.5 mg; the tungsten content is more than 1 mg [Translator note. should be “less than 1 mg”. However, there is no Corrigendum from Chinese Authority yet]; the contents of niobium, tantalum, zirconium, and rare earth are less than 0.5 mg; the boron content is less than 0.2mg; the contents of tin, antimony, lead, and bismuth are less than 0.1 mg; there will be no interference. When the tungsten content is more than 1 mg, use citric acid to complex; when the molybdenum content is more than 1.5 mg, add molybdenum with the same content in the working curve to offset interference.3 Reagents3.1 Potassium pyrosulphate. 3.2 Hydrochloric acid (ρl. 19 g / mL). 3.3 Hydrochloric acid (2+1). 3.4 Nitric acid (ρl. 42 g/mL). 3.5 Ammonium hydroxide (ρ 0.90 g/mL). 4.2 Determination 4.2.1 Place the sample (4.1) in a 150 mL conical flask; add 10~20 mL of mixed-acid of hydrochloric acid (3.2) and nitric acid (3.4) in appropriate proportion heat to dissolve; add 15 mL of sulfuric acid (3.6) (For sample that contains tungsten, directly add 30 mL of sulfuric acid (3.7); heat to dissolve; drop-add nitric acid (3.4) to destroy carbide). Evaporate it until oleum emits; take down to cool slightly. 4.2.2 Add 50 mL of water; heat to dissolve the salts. Take down to cool to room temperature. If the tungsten content in the transferred sample solution is more than 1 mg, after oleum emits, cool slightly; add 10 mL of ammonium citrate solution (3.11) and 10 mL of water; cool slightly; add 35 mL of ammonium hydroxide (3.5); heat until the tungstic acid is dissolved; and boil until there is no ammonia odor. Cool slightly; add 15 mL of sulfuric acid (3.6); cool to room temperature. Note. the insoluble residues usually contain little titanium, so it can be ignored. If the titanium in residues needs to be recycled, use slow filter paper with a small amount of pulp to filter the solution (4.2.1~4 2.2) in a 100 mL volumetric flask. Use sulfuric acid (3.8) to wash the filter paper; retain the filtrate. Transfer the residues and filter paper to a platinum crucible to ash and burn; add 2 drops of sulfuric acid (3.6) and 2~3 mL of hydrofluoric acid (3.9); evaporate them to dry. Add 0.5 g of potassium pyrophosphate (3.1) to melt; use a small amount of sulfuric acid (3.7) to leach; combine them in filtrate. 4.2.3 Transfer the solution (4.2.2) in a 100 mL volumetric flask; dilute with water to the scale; mix uniformly. 4.2.4 Transfer two portions of 10.00 mL of solution (4.2.3) (transfer 5.00 mL, when the titanium content is more than 0.5%); place into two 50 mL volumetric flasks respectively; Conduct according to 4.2.5 and 4.2.6. 4.2.5 Color liquid. add 5 mL of ascorbic acid solution (3.10); mix uniformly; add 15 mL of hydrochloric acid (3.3); place for 5 minutes (the solution temperature shall be above 20 °C, so as to ensure the reduction of iron); add 15 mL of diantipyrylmethane solution (3.12); use water to dilute to the scale; mix uniformly. Place it under room temperature for more than 40 minutes. 4.2.6 Reference solution. Conduct according to 4.2.5, except that diantipyrylmethane solution is not added. 4.2.7 Transfer part of color liquid in absorption vessel (see table 2); use reference solution as the reference; measure the absorbance at wavelength of 390 nm of spectrophotometer. 4.2.8 Find the corresponding titanium content in color liquid from the working curve, according to the measured absorbance of solution. 4.3 Working curve drawing ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 223.17-1989 be delivered?Answer: The full copy PDF of English version of GB/T 223.17-1989 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 223.17-1989_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 223.17-1989_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 223.17-1989 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB/T 223.17-1989?A step-by-step guide to download PDF of GB/T 223.17-1989_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 223.17-1989". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
