GB/T 1596-2017 PDF EnglishUS$195.00 · In stock · Download in 9 seconds
GB/T 1596-2017: Fly ash used for cement and concrete Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 1596: Historical versions
GB/T 1596-2017: Fly ash used for cement and concrete---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT1596-2017GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 91.100.10 Q 11 Replacing GB/T 1596-2005 Fly ash used for cement and concrete Issued on. JULY 12, 2017 Implemented on. JUNE 1, 2018 Issued by. General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration Committee. Table of ContentsForeword... 3 1 Scope... 5 2 Normative references... 5 3 Terms and definitions... 6 4 Classification... 6 5 Grade... 7 6 Technical requirements... 7 7 Test methods... 9 8 Inspection rules... 10 9 Packaging, marks, transport and storage... 12 Annex A (Normative) Test method for water demand ratio of fly ash... 13 Annex B (Normative) Test method for water content of fly ash... 15 Annex C (Normative) Test method for strength activity index of fly ash... 17ForewordThis Standard was drafted in accordance with the rules given in GB/T 1.1-2009. This Standard replaces GB/T 1596-2005 Fly ash used for cement and concrete. Compared with GB/T 1596-2005, the main technical changes in this Standard are as follows. - modified “reference sample. complies with GSB 14-1510 Cement standard sample used for strength testing” to “reference cement. Portland cement or ordinary Portland cement that complies with GSB 14-1510, or is of strength grade of 42.5 specified in GB 175 and this Standard” (see 3.2 of this Edition, 3.2 of Edition 2005); - in technical requirements, added indicators of “SiO2, Al2O3, Fe2O3 total mass fraction, density and strength activity” in “mixed fly ash for concrete and mortar”; the Grade II fly ash fineness index was modified from “45μm square hole sieve residue is not greater than 25%” to “45μm square hole sieve residue is not greater than 30%”; Grade III fly ash loss was modified from “not greater than 15.0%” to “not greater than 10.0%” (see 6.1 of this Edition, 6.1 of Edition 2005); - in technical requirements, added indicators of “SiO2, Al2O3, Fe2O3 total mass fraction and density” in “fly ash used for cement activity mixed materials” (see 6.2 of this Edition); - modified the radioactive indicators from “qualified” to “meet building body material requirements in GB 6566” (see 6.2 of this Edition, 6.3 of Edition 2005); - when using dry or semi-dry desulfurization process, the resulting fly ash shall be subjected to the detection of hemihydrate calcium sulfite content; added specified indicators and test methods (see 6.4 and 7.5 of this Edition); - added radioactive test sample ratio (see 7.9 of this Edition); - modified the reference cement mortar fluidity in fly ash water ratio test from “130mm ~ 140mm” to “145mm ~ 155mm”; modified the test procedures at the same time (see Annexes A.3 and A.5 of this Edition; Annexes B.3 and B.5 of Edition 2005). This Standard was proposed by China Building Materials Federation. This Standard shall be under the jurisdiction of National Technical Committee on Cement of Standardization Administration of China (SAC/TC 184). Main drafting organizations of this Standard. China Building Materials Academy, Yangtze River Water Resources Commission Academy of Sciences of the Yangtze River, Shanghai Academy of Building Research, China Three Gorges Corporation, Zhuzhou Hongxin Special Building Material Co., Ltd., Xiamen ISO Standard Sand Co. Ltd. The drafting organizations of this Standard. Yuanbaoshan Power Co., Ltd., Huadian Power International Co., Ltd., Zouxian Power Plant, Sichuan Tao Feng Fly Ash Trade Co., Ltd., Guizhou Mingchuan Fly Ash Co., Ltd., Xuanwei Power Fly Ash Development Co., Ltd., Shenzhen Weihai Building Materials Co., Ltd., Shanghai Construction Materials Co., Ltd., Jiangsu Huanghai Cement Co., Ltd., Xinjiang Tianshan Cement Co., Ltd., Shandong Zhuozhou Cement Co., Ltd., Ningbo Xinhai Construction Materials Testing Co., Ltd., Shanghai Bridge Industrial Co., Ltd., Yunnan Building Materials Products Quality Inspection Institute, Inner Mongolia Building Materials Product Quality Inspection Institute. Main drafters of this Standard. Jiang Lizhen, Zhu Wenshang, Wang Shuyin, Du Yong, Yang Lixiang, Li Wenwei, Yan Jianjun, Shen Yanjun, Chen Guiquan, Li Laifang, Xue Yueyu, Yu Haibo, Wu Baohua, Zhu Mintao, Deng Minhui, Wang Jianbiao, Li Xihua, Chen Wenyao, Gong Bo, He Jiangfang, Wu Feicai, Gao Huijuan, He Jun, Liu Qingbin, Lin Maosong, Ma Zhaomu, Wang Xingqin, Ren Fenmei. Versions of standard substituted by this Standard are. - GB/T 1596-1979, GB/T 1596-1991, GB/T 1596-2005. Fly ash used for cement and concrete1 ScopeThis Standard specifies the terms and definitions, classification, grade, technical requirements, test methods, inspection rules, packaging, marks, transport and storage of fly ash used for cement and concrete. This Standard is applicable to the fly ash used as admixture when mixing mortar and concrete as well as the fly ash used as active mixed material in cement production.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB 175, Common Portland Cement GB/T 176, Method for Chemical Analysis of Cement GB/T 208, STANDARD test method for cement density GB/T 1345, The Test Sieving Method for Fineness of Cement GB/T 1346, Standard test method for water requirement for normal consistency setting time and soundness of the Portland cement GB/T 2419, Test method for fluidity of cement mortar GBT 5484, Methods for chemical analysis of gypsum GB 6566, Limits of radionuclides in building materials3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply. 3.1 fly ash powder collected in flue gas of pulverized coal stove of power plant 3.2 reference cement Portland cement or ordinary Portland cement that complies with GSB 14-1510, or is of strength grade of 42.5 specified in GB 175 and this Standard 3.4 reference mortar mixed by reference cement and specified grade standard sand according to a mass ratio of 1.3 3.5 testing mortar mixed by testing sample and specified grade standard sand according to a mass ratio of 1.34 Classification4.1 According to category of coal, it is divided into F type fly ash (fly ash collected from the burning of anthracite or bituminous coal) and C type fly ash (fly ash collected from the calcination of lignite or sub-bituminous coal; calcium oxide content is generally greater than or equal to 10%).5 GradeThe fly ash used for mixing mortar and concrete is divided into three grades. I, II, III.6 Technical requirements6.1 Physical and chemical performance requirements The fly ash used for mixing mortar and concrete shall meet requirements of Table 1.The fly ash used for cement activity mixed materials shall meet requirements of Table 1. 6.2 Radioactivity Meet building body material requirements in GB 6566. 6.3 Alkali content Represented by the calculated value of Na2O + 0.658K2O. When there are requirements for alkali content in fly ash application, it shall be confirmed by the supplier and the purchaser.7 Test methods7.1 Fineness Carry out according to 45μm negative pressure sieve method in GB/T 1345. Sieving time is 3 min. 7.2 Water demand ratio In accordance with Annex A. 7.3 Loss, sulfur trioxide, free calcium oxide, silicon dioxide, aluminum oxide, ferric oxide, alkali content shall be in accordance with GB/T 176. 7.4 Water content In accordance with Annex B. 7.5 Hemihydrate calcium sulfite In accordance with GB/T 5484. 7.8 Strength activity index In accordance with Annex C. 7.9 Radioactivity Mix well the fly ash and the Portland cement that meets GB 175 requirements according to a mass ratio of 1.1.Detect according to GB 6566.8 Inspection rules8.1 Numbering and sampling Before leaving factory, the numbering and sampling of fly ash shall be carried out according to same category and same grade. 8.2 Exit-factory inspection 8.2.1 For the fly ash used for mixing concrete and mortar, the exit-factory inspection items shall be all items in Table 1 of 6.1 except the loss and strength activity index. Add 6.4 hemihydrate calcium sulfite (CaSO3 · 1/2H2O) for the fly ash discharged by using dry or semi-dry desulfurization process. 8.3 Type inspection 8.3.1 The type inspection items for the fly ash used for mixing concrete and mortar shall be specified in Table 1 of 6.1, 6.2 and 6.4. 8.3.2 The type inspection items for the fly ash used for cement activity mixed material shall be specified in Table 2 of 6.1, 6.2 and 6.4. 8.4 Determination rules 8.4.1 Exit-factory inspection 8.4.1.1 When the exit-factory inspection items for the fly ash used for mixing concrete and mortar meet technical requirements of Table 1 of 6.1 and 6.4, the exit-factory inspection shall be qualified. Should any item fail to meet the requirements, it is permitted to re-sample from same number for the re-inspection of all items. The determination shall be based on the re-inspection results. 8.4.2 Type inspection 8.4.2.1 When the exit-factory inspection items for the fly ash used for mixing concrete and mortar meet technical requirements of Table 1 of 6.1, 6.2, 6.4, the type inspection shall be qualified. Should any item fail to meet the requirements, it is permitted to re-sample from this batch of samples remained for the re-inspection of all items. The determination shall be based on the re-inspection results. 8.5 Inspection report The inspection report shall include exit-factory number, exit-factory inspection items, classification, grade. When required by the user, the producer shall send out the inspection results except the strength activity index within 7 days from the date of issue of the fly ash, and report the result of the strength activity index within 32 days. 8.6 Arbitration When the quality of fly ash is controversial, the relevant organizations shall sign the approved samples and submit them to the quality supervision and inspection agencies approved by the country at the provincial level or above for arbitration and inspection.9 Packaging, marks, transport and storage9.1 Packaging Fly ash can be bulk or bagged. The net content per bag is 25 kg or 40 kg. The net content of each bag shall not be less than 99%. Other packaging specifications shall be determined negotiated by the supplier and the purchaser. 9.2 Marks Bulk fly ash should provide a card, including product name, classification, grade, net content, batch number, the implementation number of standards, the name and address of the manufacturer, production date. Packaged bag of fly ash shall be marked with the same content as bulk fly ash card. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 1596-2017 be delivered?Answer: The full copy PDF of English version of GB/T 1596-2017 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 1596-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 1596-2017_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 1596-2017 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 1596-2017?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 1596-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 1596-2017?A step-by-step guide to download PDF of GB/T 1596-2017_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 1596-2017". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
