GB 30509-2014 PDF EnglishUS$70.00 · In stock · Download in 9 seconds
GB 30509-2014: [Including 2020XG1] Identification for passenger cars and their parts Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB 30509-2014: [Including 2020XG1] Identification for passenger cars and their parts---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB30509-2014NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 43.020 T 04 Identification for passenger cars and their parts [Including No.1 Amendment, 2020XG1] Issued on. FEBRUARY 19, 2014 Implemented on. DECEMBER 1, 2014 Issued by. General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration Committee. Table of ContentsForeword... 3 1 Scope... 4 2 Normative references... 4 3 Terms and definitions... 4 4 Identification information for identification for passenger cars and their parts... 4 5 Number and location of identification for passenger cars and their parts... 5 6 Marking method of identification for passenger cars and their parts... 5 No.1 Amendment [2020XG1]... 8ForewordClause 4, Clause 5, Clause 6 of this Standard are mandatory. The rest are recommendatory. This Standard was drafted in accordance with the rules given in GB/T 1.1-2009. This Standard refers to the US Federal Code, Volume 49, CFR49 § 541, Federal Motor Vehicle Anti-Theft Standards. This Standard was proposed by National Development and Reform Commission, People's Republic of China. This Standard shall be under the jurisdiction of National Technical Committee on Automobiles of Standardization Administration of China (SAC/TC 114). Main drafting organizations of this Standard. China Automotive Technology and Research Center, Ministry of Public Security Traffic Management Research Institute. The drafting organizations of this Standard. China First Automobile Group Corporation, Pan Asia Automotive Technology Center Co., Ltd., Chery Automobile Co., Ltd., SAIC- GM-Wuling Automobile Co., Ltd., Chang'an Automobile (Group) Co., Ltd., Dongfeng Motor Co., Ltd. Dongfeng Nissan Passenger Vehicle Co., Ltd., Guangzhou Automobile Toyota Motor Co., Ltd., Dongfeng Motor Corporation, Dongfeng Honda Automobile Co., Ltd., Dongfeng Peugeot Citroen Automobile Co., Ltd., Shanghai Automotive Group Co., Ltd. Technical Center. Main drafters of this Standard. Zhu Tong, Geng Lei, Gong Biao, Zhang Ruoci, Sun Hongfen, Xu Juan, Guo Hongbing, Deng Qian, Feng Yuying, Wang Lihong, Guo Chaoying, Fang Jin, Xu Hai'e, Wang Yan, Wang Xinmin. Identification for passenger cars and their parts1 ScopeThis Standard specifies the requirements for marking identification on the main parts of passenger cars. This Standard is applicable to M1 vehicles. The identification of other vehicle parts (or assemblies) can refer to use.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB 16735-2004, Road vehicle - Vehicle identification number (VIN)3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply. 3.1 interior surface as far as vehicle parts are concerned, the surface that is not directly exposed to sunlight and rain4 Identification information for identification for passenger cars and their partsThe identification information for the identification for passenger cars and their parts shall be either a) or b).5 Number and location of identification for passenger cars and their parts5.1 Passenger cars shall be marked on the visible parts of the baggage compartment with the identification for passenger cars and their parts in accordance with a) specified in Clause 4.Mark the identification for passenger cars and their parts in accordance with a) or b) in Clause 4 on the transmission (or drive motor). 5.2 Passenger cars shall have at least one electronic control unit (ECU) to immutably record the identification information for passenger cars and their parts in accordance with a) specified in Clause 4. 5.3 In addition to the provisions of 5.1 and 5.2, passenger cars shall also have at least 5 parts (or assemblies) marked with identification for passenger cars and their parts in accordance with a) or b) of Clause 4. 5.4 Parts (or assemblies) marked with the vehicle and component identification specified in 5.3 do not include the parts (or assemblies) marked with VIN in accordance with 5.2.2, 5.2.3, and 5.2.4 of GB 16735-2004.6 Marking method of identification for passenger cars and their parts6.1 The identification for passenger cars and their parts specified in 5.1 shall be marked in the form of human readable codes. The identification for passenger cars and their parts specified in 5.3 shall be in the form of a manually readable code or a combination of human readable code and machine readable code. 6.2 The identification for passenger cars and their parts shall be affixed to the parts by means of labels, or may be directly engraved on the parts; or the data information conforming to the relevant standards may be stored in the electronic control unit memory in an unchangeable manner. The identification for passenger cars and their parts shall be satisfied when it is marked by labels or directly engraved. 6.3 The vehicle manufacturer shall specify the target area for marking the identification for passenger cars and their parts on each part specified in 5.1 and 5.3. The target area shall not exceed 50% of the surface area of the part where the target area is located. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB 30509-2014 be delivered?Answer: The full copy PDF of English version of GB 30509-2014 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB 30509-2014_English with my colleagues?Answer: Yes. The purchased PDF of GB 30509-2014_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB 30509-2014 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB 30509-2014?A step-by-step guide to download PDF of GB 30509-2014_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB 30509-2014". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
