GB 25029-2010 PDF EnglishUS$150.00 · In stock · Download in 9 seconds
GB 25029-2010: Steel slag cement for road Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB 25029-2010: Steel slag cement for road---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB25029-2010GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 91.100.10 Q 11 Steel slag cement for road ISSUED ON: SEPTEMBER 02, 2010 IMPLEMENTED ON: JULY 01, 2011 Issued by: General Administration of Quality Supervision, Inspection and Quarantine of PRC; Standardization Administration of PRC. This standard was renamed to recommended standard from March 23, 2017. Its number was changed to GB/T 25029-2010. Table of ContentsForeword ... 3 1 Scope ... 4 2 Normative references ... 4 3 Terms and definitions ... 5 4 Components and materials ... 5 5 Strength grade ... 6 6 Technical requirements ... 6 7 Test method ... 7 8 Inspection rules ... 8 9 Packaging, marking, transportation and storage ... 10 Steel slag cement for road1 ScopeThis standard specifies the definition, composition and material, strength grade, technical requirements, test methods, inspection rules, packaging, marking, transportation and storage of steel slag cement for road. This standard applies to steel slag cement for road.2 Normative referencesThe provisions in following documents become the provisions of this Standard through reference in this Standard. For the dated references, the subsequent amendments (excluding corrections) or revisions do not apply to this Standard; however, parties who reach an agreement based on this Standard are encouraged to study if the latest versions of these documents are applicable. For undated references, the latest edition of the referenced document applies. GB/T 176 Methods for chemical analysis of cement GB/T 203 Granulated blast furnace slag used for cement production GB/T 750 Method for soundness of Portland cement GB/T 1346 Test methods for water requirement of normal consistency, setting time and soundness of the Portland cement (GB/T 1346-2001, eqv ISO 9597:1989) GB/T 5483 Natural gypsum GB/T 8074 Testing method for specific surface of cement - Blaine method GB 9774 Sacks for packing cement GB/T 12573 Sampling method for cement GB/T 12960 Quantitative determination of constituents of cement GB 13693 Portland cement for road GB/T 17671 Method of testing cements - Determination of strength (ISO method) (GB/T 17671-1999, idt ISO 679:1989) 4.4 Granulated blast furnace slag Granulated blast furnace slag meeting the requirements of GB/T 203. 4.5 Granulated blast furnace slag powder Granulated blast furnace slag powder that meets the requirements of GB/T 18046. 4.6 Road Portland cement clinker Road Portland cement clinker that meets the requirements of GB 13693. 4.7 Plaster 4.7.1 Natural gypsum: Gypsum or mixed gypsum that shall conform to category G or category M grade 2 (inclusive) or higher as specified in GB/T 5483. 4.7.2 Industrial by-product gypsum: It shall meet the industrial by-product gypsum specified in GB/T 21371. 4.8 Grinding aid Grinding aids are allowed to be added during cement grinding; the addition amount shall not exceed 0.5% of the cement mass. The grinding aids shall meet the requirements of JC/T 667.5 Strength gradeThe strength grade of steel slag cement for road is divided into grades 32.5 and 42.5.6 Technical requirements6.1 Sulfur trioxide The sulfur trioxide content (mass fraction) shall not exceed 4.0%. 6.2 Setting time The initial setting time is not less than 90 min; the final setting time is not more than 600 min. 6.3 Stability The stability test adopts the autoclave method; the autoclave expansion rate shall not be greater than 0.50%. producer shall check the cement components at least monthly, the annual average shall meet the requirements of 4.1, the single inspection value shall not exceed 2% of the maximum limit specified in this standard. In order to ensure the accuracy of the component determination results, the manufacturer shall adopt appropriate production procedures and appropriate methods to verify the reliability of the selected method; document the verified method. 7.2 Sulfur trioxide (SO3), chloride ion, sodium oxide (Na2O), potassium oxide (K2O) content Test according to GB/T 176. 7.3 Specific surface area Test according to GB/T 8074. 7.4 Water consumption and setting time for standard consistency Test according to GB/T 1346. 7.5 Steaming stability Test according to GB/T 750. 7.6 Dry shrinkage rate Test according to JC/T 603. 7.7 Abrasion resistance Test according to JC/T 421. 7.8 Strength Test according to GB/T17671.8 Inspection rules8.1 Numbering and sampling Cement is numbered and sampled according to the same type and grade before leaving the factory. Bagged cement and bulk cement shall be numbered and sampled separately. Each number is a sampling unit; the cement’s exit-factory number is based on the annual output of steel slag cement for road: Above 100000 t but not more than 400 t is a number; less than 100000 t but not shall be agreed upon by the buyer and the seller and shall be indicated in the contract or agreement. The seller has the responsibility to inform the buyer of the acceptance method. When there is no written contract or agreement, or the method of acceptance is not indicated in the contract or agreement, the seller shall indicate the words "use the cement inspection report of the same number as the basis for acceptance" on the invoice. 8.6.2 When taking the inspection result of the physical specimen as the basis for acceptance, the buyer and the seller shall jointly take the sample and sign & seal it before shipment or the place of delivery. The sampling method is carried out according to GB 12573, the sampling quantity is 28 kg, which is reduced into two equal parts. One part shall be kept by the seller for 40 days, the other part shall be inspected by the buyer according to the items and methods specified in this standard. Within 40 days, if the buyer considers that the quality of the product does not meet the requirements of this standard, whilst the seller has objections, both parties shall send another specimen kept by the seller to a national cement quality supervision and inspection agency as recognized by the province or above for arbitration inspection. The arbitration inspection of cement stability shall be completed within 10 days from the date of sampling. 8.6.3 When the manufacturer’s inspection report of the cement with the same number is used as the basis for acceptance, the buyer will sample the cement with the same number before shipment or at the time of delivery. The both parties shall sign-seal it and the seller retains it for 90 days; or otherwise it recognizes the seller’s sampling, or the retained sample from the cement of same number which was sign-sealed and kept for 90 d. Within 90 days, when the buyer has doubts about the quality of cement, the buyer and the seller will send the jointly approved samples to a national cement quality supervision and inspection agency recognized by the province or above for arbitration inspection.9 Packaging, marking, transportation and storage9.1 Packaging Cement can be packed in bags or in bulk. The net content of each bag of bagged cement is 50 kg, which shall not be less than 99% of the marked mass; the total mass (including packaging bags) of 20 bags randomly selected shall not be less than 1000 kg. Other packaging forms are determined through negotiation between the supplier and the buyer, but the relevant bag mass requirements must comply with the above principles. The cement packaging bag shall meet the requirements of GB 9774. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB 25029-2010 be delivered?Answer: The full copy PDF of English version of GB 25029-2010 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB 25029-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB 25029-2010_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB 25029-2010 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB 25029-2010?A step-by-step guide to download PDF of GB 25029-2010_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB 25029-2010". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
