Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB 1886.331-2021 PDF English

US$95.00 · In stock · Download in 9 seconds
GB 1886.331-2021: National food safety standard - Food additives - Ammonium phosphate
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
Standard IDUSDBUY PDFDeliveryStandard Title (Description)Status
GB 1886.331-202195 Add to Cart Auto, 9 seconds. National food safety standard - Food additives - Ammonium phosphate Valid

Similar standards

GB 1886.330   GB 1886.332   GB 1886.329   GB 1886.324   

GB 1886.331-2021: National food safety standard - Food additives - Ammonium phosphate

---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB1886.331-2021
GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA National food safety standard - Food additives - Ammonium phosphate ISSUED ON: FEBRUARY 22, 2021 IMPLEMENTED ON: AUGUST 22, 2021 Issued by: National Health Commission of the People's Republic of China; State Administration for Market Regulation.

Table of Contents

Foreword ... 3 1 Scope ... 4 2 Molecular formula and relative molecular mass ... 4 3 Technical requirements ... 4 Appendix A Inspection method ... 6 National food safety standard - Food additives - Ammonium phosphate

1 Scope

This Standard applies to the food additive ammonium phosphate that is produced with liquid ammonia and the food additive phosphoric acid (including wet-process phosphoric acid) as raw materials.

2 Molecular formula and relative molecular mass

2.1 Molecular formula (NH4)2HPO4 2.2 Relative molecular mass 132.06 (according to the international relative atomic mass in 2018)

3 Technical requirements

3.1 Sensory requirements Sensory requirements shall be in accordance with Table 1. Table 1 – Sensory requirements 3.2 Physical and chemical indicators Physical and chemical indicators shall be in accordance with Table 2. Table 2 – Physical and chemical indicators

Appendix A

Inspection method WARNING: Some reagents which are used in this test method are toxic or corrosive, so, be careful when operating! If necessary, perform it in a fume hood. If it is splashed on the skin, use water to rinse it immediately. If it is serious, seek medical attention immediately. A.1 General provisions The reagents and water that are used in this Standard, when no other requirements are specified, refer to analytical reagents and grade-III water which is specified in GB/T 6682. The standard solutions, preparations and products for impurity determination, which are used in the test, are all prepared in accordance with the provisions of GB/T 601, GB/T 602, and GB/T 603, when no other requirements are specified. The used solution, if not indicated which solvent is used, refers to aqueous solution. A.2 Identification test A.2.1 Reagents and materials A.2.1.1 Nitric acid solution: 1+8. A.2.1.2 Ammonia solution: 1+1. A.2.1.3 Sodium hydroxide solution: 40 g/L. A.2.1.4 Silver nitrate solution: 17 g/L. A.2.1.5 Litmus red test paper. A.2.2 Identification method A.2.2.1 Identification of phosphate ion Weigh about 1.0 g of the sample; dissolve it in 20 mL of water; use nitric acid solution to adjust the pH to neutral. Add silver nitrate solution, to produce a yellow precipitate. This precipitate is soluble in ammonia solution or nitric acid solution. A.2.2.2 Identification of ammonium ion Weigh about 1.0 g of the sample; dissolve it in 20 mL of water; add sodium hydroxide solution; the released ammonia gas can turn the wet litmus red test paper blue. Heating can promote the decomposition of the sample. A.3 Determination of the content of ammonium phosphate [(NH4)2HPO4] A.3.1 Method summary After the sample is dissolved, it reacts with formaldehyde to generate an acid equivalent to the content of ammonium salt. Use sodium hydroxide standard titration solution to titrate; use an acidity meter to indicate the end point. According to the volume of the consumed sodium hydroxide standard titration solution, calculate the content of ammonium phosphate. A.3.2 Reagents and materials A.3.2.1 Formaldehyde solution: 1+1. A.3.2.2 Sodium hydroxide standard titration solution: c(NaOH) = 1 mol/L. A.3.2.3 Carbon dioxide-free water. A.3.3 Instruments and apparatuses A.3.3.1 Acidity meter: resolution of 0.01 pH, equipped with glass electrode and saturated calomel electrode (or composite electrode). A.3.3.2 Electromagnetic stirrer: equipped with a stirring rotor. A.3.4 Analysis steps Weigh about 1.8 g of the sample, accurate to 0.000 2 g; place it in a 150 mL beaker. Add 50 mL of carbon dioxide-free water; place it on the electromagnetic stirrer; put in the stirring rotor; stir until the sample is dissolved; add 40 mL of newly prepared formaldehyde solution; stir well and leave it for 30 min. Put the electrode of the calibrated acidity meter into the sample solution; use sodium hydroxide standard titration solution to titrate the pH to 8.9 as the end point; record the volume of consumed sodium hydroxide standard titration solution. Do a blank test at the same time. Except that no sample is added, the type and amount of other reagents (except the standard titration solution) are the same as the sample solution. A.3.5 Result calculation The mass fraction w1 of the content of ammonium phosphate [(NH4)2HPO4] is calculated according to Formula (A.1). ......

Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Image 1     Image 2     Image 3     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of English version of GB 1886.331-2021 be delivered?Answer: The full copy PDF of English version of GB 1886.331-2021 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB 1886.331-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB 1886.331-2021_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB 1886.331-2021 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

How to buy and download a true PDF of English version of GB 1886.331-2021?

A step-by-step guide to download PDF of GB 1886.331-2021_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB 1886.331-2021".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9