CNCA 00C-004-2013 PDF EnglishUS$155.00 · In stock · Download in 9 seconds
CNCA 00C-004-2013: China Compulsory Certification Implementation Rules - Utilization of manufacturing enterprise test resources and other certification results Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Similar standardsCNCA 00C-004-2013: China Compulsory Certification Implementation Rules - Utilization of manufacturing enterprise test resources and other certification results---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/CNCA00C-004-2013 Notice of the CNCA on Issue of China Compulsory Certification Implementation Rules for Manufacturing Enterprise Classification Management No.27, 2013 In order to further promote the scientific, standardized, and effective implementation of compulsory certification, according to “Certification & Accreditation Ordinances”, “Administrative Measures for China Compulsory Certification”, and the overall plan for document adjustment of China compulsory certification implementation rules, the Certification and Accreditation Administration of the PRC (CNCA) has completed the preparation of two new general implementation rules. “China Compulsory Certification Implementation Rules - Manufacturing Enterprise Classification Management, Certification Mode Selection and Determination” and “China Compulsory Certification Implementation Rules - Utilization of Manufacturing Enterprise Testing Resource and Other Certification Results”, now released for implementation. Notice is hereby given. Table of Contents0 Introduction... 4 1 Terms and definitions... 4 1.1 TMP mode... 4 1.2 WMT mode... 4 2 Utilization of factory testing resource... 4 2.1 Application scope... 4 2.2 Implementation mode... 5 2.3 Condition requirements... 5 2.4 Qualification and maintenance... 7 2.5 Duties and responsibilities... 7 2.6 Implementation requirements... 8 2.7 Charges... 8 3 Utilization of other certification results... 9 3.1 Application scope... 9 3.2 Responsibilities... 9 3.3 Implementation requirements... 10 3.4 Charges... 101 Terms and definitions1.1 TMP mode The mode in which the designated laboratory directly uses the testing equipment in the factory laboratory to conduct testing [Testing at Manufacturer's Premises, abbreviated as TMP]. 1.2 WMT mode The mode in which the designated laboratory uses the testing equipment in the factory laboratory to witness testing [Witnessed Manufacturer's Testing, abbreviated as WMT].2 Utilization of factory testing resource2.1 Application scope 2.1.1 Type test. It only applies to the following CCC certified products 2.2 Implementation mode According to the comprehensive situation of equipment resources, human resources, and soft resources of factory laboratory, combined with product characteristics, the utilization of factory testing resources for sample testing is classified into TMP and WMT modes. 2.2.1 TMP mode Qualified engineers from designated laboratories sent by designated certification bodies use the testing equipment of factory laboratory for testing. The factory shall send testing personnel to assist. 2.2.2 WMT mode Qualified engineers from designated laboratories sent by designated certification bodies witness the factory laboratory’s test conditions and all tests completed by using the laboratory’s equipment, or according to the test plan submitted by the factory to certification body, witness part of the test conditions and the test items. 2.3 Condition requirements This Rules specifies the basic conditions for the utilization of factory testing resources. The designated certification body shall, according to specific products and specific management needs, establish specific condition requirements. 2.3.1 TMP mode 2.3.2 WMT mode 2.4 Qualification and maintenance 2.4.1 The factory shall apply to the certification body, and conduct self-inspection according to the above conditions, and submit the self-inspection results and related materials to the certification body for review with the application. 2.4.2 The certification body shall conduct regular (e.g., once a year, determined according to the frequency of utilization) supervision of the approved factory laboratories (which may be conducted in combination with the factory annual supervision), and organize the factory laboratories to participate in the comparison test, to ensure the accuracy and validity of the test results and maintain qualifications. 2.5 Duties and responsibilities 2.5.1 Duties 2.5.1.1 Duties of designated certification body 2.5.1.2 Duties of designated laboratory 2.5.2 Responsibilities The utilization of factory testing resources for sample testing does not exempt, mitigate, or transfer the responsibility of designated laboratories and certification bodies specified in “Administrative Provisions on China Compulsory Certification” for test results and certification results. 2.6 Implementation requirements The certification body shall formulate specific implementation procedures according to the above principles, clarify the specific responsibilities of each party in the implementation process, and sign relevant agreements with designated laboratories and factory laboratories, to make arrangements for confidentiality, safety responsibility of engineers, and other related matters. 2.7 Charges The TMP testing fee shall be charged according to the upper limit between the 50% of “Product Testing Fee Standard for China Compulsory Certification” filed with the National Development and Reform Commission and the man-hour man-day fees for laboratory capability review and on-site inspection (The maximum shall not exceed 100% of the total testing fees).3 Utilization of other certification results3.1 Application scope The implementation rules for the certificate of product certification and certificate of management system certification, issued by the certification body authorized and approved by the CNCA, shall be filed in accordance with national regulations. The certificates shall be valid. 3.1.2 System certification When implementing compulsory product certification, enterprises with valid certificates of service and management system certification issued by the certification body authorized by the CNCA, shall be evaluated by the certification body according to the actual situation. 3.2 Responsibilities The utilization of voluntary certification results does not exempt, mitigate, or transfer the responsibility of designated laboratories and certification bodies specified in “Administrative Provisions on China Compulsory Certification” for test results and certification results. 3.3 Implementation requirements The designated certification body shall establish management procedures for utilization of other certification results, Notice of the CNCA on Issue of China Compulsory Certification Implementation Rules for Manufacturing Enterprise Classification Management No.27, 2013 In order to further promote the scientific, standardized, and effective implementation of compulsory certification, according to “Certification & Accreditation Ordinances”, “Administrative Measures for China Compulsory Certification”, and the overall plan for document adjustment of China compulsory certification implementation rules, the Certification and Accreditation Administration of the PRC (CNCA) has completed the preparation of two new general implementation rules. “China Compulsory Certification Implementation Rules - Manufacturing Enterprise Classification Management, Certification Mode Selection and Determination” and “China Compulsory Certification Implementation Rules - Utilization of Manufacturing Enterprise Testing Resource and Other Certification Results”, now released for implementation. Notice is hereby given.Table of Contents0.Introduction... 4 1.Terms and definitions... 4 1.1 TMP mode... 4 1.2 WMT mode... 4 2.Utilization of factory testing resource... 4 2.1 Application scope... 4 2.2 Implementation mode... 5 2.3 Condition requirements... 5 2.4 Qualification and maintenance... 7 2.5 Duties and responsibilities... 7 2.6 Implementation requirements... 8 2.7 Charges... 8 3.Utilization of other certification results... 9 3.1 Application scope... 9 3.2 Responsibilities... 9 3.3 Implementation requirements... 10 3.4 Charges... 101.Terms and definitions1.1 TMP mode The mode in which the designated laboratory directly uses the testing equipment in the factory laboratory to conduct testing [Testing at Manufacturer's Premises, abbreviated as TMP]. 1.2 WMT mode The mode in which the designated laboratory uses the testing equipment in the factory laboratory to witness testing [Witnessed Manufacturer's Testing, abbreviated as WMT].2.Utilization of factory testing resource2.1 Application scope 2.1.1 Type test. It only applies to the following CCC certified products 2.2 Implementation mode According to the comprehensive situation of equipment resources, human resources, and soft resources of factory laboratory, combined with product characteristics, the utilization of factory testing resources for sample testing is classified into TMP and WMT modes. 2.2.1 TMP mode Qualified engineers from designated laboratories sent by designated certification bodies use the testing equipment of factory laboratory for testing. The factory shall send testing personnel to assist. 2.2.2 WMT mode Qualified engineers from designated laboratories sent by designated certification bodies witness the factory laboratory’s test conditions and all tests completed by using the laboratory’s equipment, or according to the test plan submitted by the factory to certification body, witness part of the test conditions and the test items. 2.3 Condition requirements This Rules specifies the basic conditions for the utilization of factory testing resources. The designated certification body shall, according to specific products and specific management needs, establish specific condition requirements. 2.3.1 TMP mode 2.3.2 WMT mode 2.4 Qualification and maintenance 2.4.1 The factory shall apply to the certification body, and conduct self-inspection according to the above conditions, and submit the self-inspection results and related materials to the certification body for review with the application. 2.4.2 The certification body shall conduct regular (e.g., once a year, determined according to the frequency of utilization) supervision of the approved factory laboratories (which may be conducted in combination with the factory annual supervision), and organize the factory laboratories to participate in the comparison test, to ensure the accuracy and validity of the test results and maintain qualifications. 2.5 Duties and responsibilities 2.5.1 Duties 2.5.1.1 Duties of designated certification body 2.5.1.2 Duties of designated laboratory 2.5.2 Responsibilities The utilization of factory testing resources for sample testing does not exempt, mitigate, or transfer the responsibility of designated laboratories and certification bodies specified in “Administrative Provisions on China Compulsory Certification” for test results and certification results. 2.6 Implementation requirements The certification body shall formulate specific implementation procedures according to the above principles, clarify the specific responsibilities of each party in the implementation process, and sign relevant agreements with designated laboratories and factory laboratories, to make arrangements for confidentiality, safety responsibility of engineers, and other related matters. 2.7 Charges The TMP testing fee shall be charged according to the upper limit between the 50% of “Product Testing Fee Standard for China Compulsory Certification” filed with the National Development and Reform Commission and the man-hour man-day fees for laboratory capability review and on-site inspection (The maximum shall not exceed 100% of the total testing fees).3.Utilization of other certification results3.1 Application scope The implementation rules for the certificate of product certification and certificate of management system certification, issued by the certification body authorized and approved by the CNCA, shall be filed in accordance with national regulations. The certificates shall be valid. 3.1.2 System certification When implementing compulsory product certification, enterprises with valid certificates of service and management system certification issued by the certification body authorized by the CNCA, shall be evaluated by the certification body according to the actual situation. 3.2 Responsibilities The utilization of voluntary certification results does not exempt, mitigate, or transfer the responsibility of designated laboratories and certification bodies specified in “Administrative Provisions on China Compulsory Certification” for test results and certification results. 3.3 Implementation requirements The designated certification body shall establish management procedures for utilization of other certification results, ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. |
