|
Std ID |
Description (Standard Title) |
|
SJ/Z 9010.24-1987
|
Measurements of the electrical properties of electronic tubes. Part 24: Methods of measurement of cathode-ray charge-storage tubes
|
|
SJ/Z 9010.25-1987
|
Measurements of the electrical properties of electronic tubes. Part 25: Methods of measurement of Geiger-Muller counter tubes
|
|
SJ/Z 9010.26-1987
|
Measurement of electrical properties of electronic tubes Part 26 Methods of measurement for camera tubes
|
|
SJ/Z 9010.27-1987
|
Measurement of electrical properties of electronic tubes Part 27 Methods of measurement for intermodulation products in transmitting tubes
|
|
SJ/Z 9010.28-1987
|
Measurement of electrical properties of electronic tubes Part 28 Methods of measurement of color TV picture tubes
|
|
SJ/Z 9010.3-1987
|
Measurements of electrical properties of electronic tubes and valves--Part 3: Measurement of equivalent input and output admittances
|
|
SJ/Z 9010.4-1987
|
Measurements of electrical properties of electronic tubes and valves--Part 4: Methods of measuring noise factor
|
|
SJ/Z 9010.5-1987
|
Measurements of electrical properties of electronic tubes and valves--Part 5: Methods of measuring hiss and hum
|
|
SJ/Z 9010.6-1987
|
Measurements of electrical properties of electronic tubes and valves--Part 6: Methods of application of mechanical shock (impulse excitation) to electronic tubes and valves
|
|
SJ/Z 9010.7-1987
|
Measurements of electrical properties of electronic tubes and valves--Part 7: Measurement of equivalent noise resistance
|
|
SJ/Z 9010.8-1987
|
Measurements of electrical properties of electronic tubes and valves--Part 8: Measurement of cathode heating time and heater warm-up time
|
|
SJ/Z 9010.9-1987
|
Measurements of electrical properties of electronic tubes and valves--Part 9: Methods of measuring the cathode-interface impedance
|
|
SJ/Z 9011.1-1987
|
Measurement of photosensitive devices. Part 1: Basic recommendations
|
|
SJ/Z 9011.2-1987
|
Measurement of photosensitive devices--Part 2: Measurement of phototubes
|
|
SJ/Z 9011.3-1987
|
Measurement of photosensitive devices. Part 3: Methods of measurement of Photoconductive cells for use in the visible spectrum
|
|
SJ/Z 9011.4-1987
|
Measurement of photosensitive devices--Part 4: Methods of measurement for photomultipliers
|
|
SJ/Z 9012-1987
|
Standard test procedures for photomultiplier tubes for scintillation counting
|
|
SJ/Z 9013-1987
|
Measurements of incidental ionizing radiation from electronic tubes
|
|
SJ/Z 9014.3-1987
|
Semiconductor components - Discrete components and integrated circuits Part 6 Thyristors
|
|
SJ/Z 9015.2-1987
|
Semiconductor devices--Integrated circuits--Part 2: Digital integrated circuits
|
|
SJ/Z 9016-1987
|
Semiconductor devices--Mechanical and climatic test methods
|
|
SJ/Z 9017-1987
|
Dimensions of electronic tubes
|
|
SJ/Z 9018-1987
|
Numbering of electrodes and designation of units in electronic tubes and valves
|
|
SJ/Z 9019-1987
|
Preparation of outline drawings of oscilloscopes and picture tubes
|
|
SJ/Z 9020-1987
|
Photometric and colorimetric methods of measurement for the light emitted by cathode-ray tube screens
|
|
SJ/Z 9021.1-1987
|
Mechanical standardization of semiconductor devices. Part 1: Preparation of drawings or semiconductor devices
|
|
SJ/Z 9021.2-1987
|
Mechanical standardization of semiconductor devices--Part 2: Dimensions
|
|
SJ/Z 9021.3-1987
|
Mechanical standardization of semiconductor devices. Part 3: General rules for the preparation of outline drawings of integrated circuits
|
|
SJ/Z 9021.4-1987
|
Mechanical standardization of semiconductor devices. Part 4: Coding system and classification into forms of package outlines for semiconductor devices
|
|
SJ/Z 9022.1-1987
|
Guide for the choice of Colours to be used for the marking of capacitors and resistors
|
|
SJ/Z 9023.1-1987
|
Fiber optic branching devices Part 2: Sectional specifications - Transmission star couplers
|
|
SJ/Z 9023.2-1987
|
Fibre optic switches--Part 1: Generic specification
|
|
SJ/Z 9023-1987
|
Fibre optic branching devices--Part 1: Generic specification
|
|
SJ/Z 9024-1987
|
Identification cards - Machine readable passports
|
|
SJ/Z 9025-1987
|
Identification cards--Physical characteristics
|
|
SJ/Z 9026.1-1987
|
(Identification cards - Recording technique Part I: letterpress)
|
|
SJ/Z 9026.2-1987
|
(Identification cards - Recording technique Part II: Magnetic Stripe)
|
|
SJ/Z 9026.3-1987
|
(Identification cards - Recording technique - Part III: the ID-1 card positioning embossed characters)
|
|
SJ/Z 9026.4-1987
|
(Identification cards - Recording technique Part IV: Read-only channel and two tracks --1 positioning)
|
|
SJ/Z 9026.5-1987
|
(Identification cards - Recording technique - Part V: read - write track --3 Road location)
|
|
SJ/Z 9027-1987
|
Identification cards--Numbering system and registration procedure for issuer identifiers
|
|
SJ/Z 9028-1987
|
Identification cards--Financial transaction cards
|
|
SJ/Z 9029.1-1987
|
Disturbances in power supply systems caused by household appliances and similar electrical equipment Part 1: Definitions
|
|
SJ/Z 9029.2-1987
|
Disturbances in power supply systems caused by household appliances and similar electrical equipment Part 2: Harmonic waves
|
|
SJ/Z 9029.3-1987
|
Disturbances in power supply systems caused by household appliances and similar electrical equipment Part 3: Voltage fluctuation
|
|
SJ/Z 9030-1987
|
Non-ionizing radiation hazard in frequency range of 10 -- 300, 000 MHz
|
|
SJ/Z 9031-1987
|
Considerations on determination of reference impedance of interference characteristics of household appliances and similar electrical equipment
|
|
SJ/Z 9032-1987
|
guidelines - measuring method of short duration of transient signal on low-voltage power and signal cables
|
|
SJ/Z 9033-1987
|
Printed boards. Part 1: General information for the specification writer
|
|
SJ/Z 9034-1987
|
Packaging of components for automatic assembly Part 1: Tape packaging of components with axial lead
|
|
SJ/Z 9035-1987
|
Stabilized supply apparatus for measurement
|
|
SJ/Z 9036-1987
|
Electrical and electronic measuring and testing equipment
|
|
SJ/Z 9037-1987
|
Quick terminal
|
|
SJ/Z 9038-1987
|
EMI filter
|
|
SJ/Z 9039-1987
|
fusing resistor and temperature-limit resistor for radio and television equipment
|
|
SJ/Z 9040-1987
|
Dual in-line converter device
|
|
SJ/Z 9041-1987
|
Across-the-line, antenna-coupling and line-by-pass capacitors for radio and television-type appliances
|
|
SJ/Z 9042-1987
|
Over-current and over-temperature protection device for radio and television equipment
|
|
SJ/Z 9045-1987
|
Information processing - Magnetic disk for data storage devices - 160, 000 flux transitions per track, with OD of 356mm
|
|
SJ/Z 9046-1987
|
Information processing - Magnetic disk for data storage devices - 107, 500 flux transitions per track, with OD of 266 and 356mm
|
|
SJ/Z 9047-1987
|
Information processing. Representation of numerical values in charactor strings for information interchange
|
|
SJ/Z 9048-1987
|
Information processing - Reels for 12. 7mm wide magnetic tapes - size of 16, 18 and 22
|
|
SJ/Z 9049-1987
|
Information processing. Self-Loading cartridges for 12.7mm wide magnetic tape
|
|
SJ/Z 9050-1987
|
Dictation equipment. Basic operating requirements
|
|
SJ/Z 9051-1987
|
Office machines and printing machines used for information processing -- widths of fabric printing ribbonsoon spools
|
|
SJ/Z 9052-1987
|
Printing ribbons. Minimum markings to appear on containers
|
|
SJ/Z 9053-1987
|
Office machines and printing machines used for information processing. Widths of one-time paper or plastic printing ribbons and marking to indicate the end of the ribbons
|
|
SJ/Z 9054-1987
|
Forms design sheet and layout chart
|
|
SJ/Z 9055-1987
|
Paper or plastic printing ribbons. Characteristics of cores
|
|
SJ/Z 9056-1987
|
Office machines and printing machines used for information processing--Widths of fabric printing ribbons exceeding 19mm
|
|
SJ/Z 9056-2016
|
(Information processing office machines and printers on a reel width of more than 19mm of fabric printing)
|
|
SJ/Z 9057-1987
|
(Dictation devices - Symbols)
|
|
SJ/Z 9058-1987
|
Office machines-keyboards-key numbering system and layout charts
|
|
SJ/Z 9059-1987
|
Keyboards for countries whose languages have alphabetic extenders - Guidelines for harmonization
|
|
SJ/Z 9060-1987
|
Information processing - Guidelines for documentation of computer-based application systems
|
|
SJ/Z 9061-1987
|
Information processing--Specification of single-hit decision tables
|
|
SJ/Z 9062-1987
|
(Information processing - processing order by record set the volume of the program flow)
|
|
SJ/Z 9063-1987
|
Commercial audio equipment
|
|
SJ/Z 9064-1987
|
Safety of information processing and business equipment
|
|
SJ/Z 9065-1987
|
Laboratory equipment
|
|
SJ/Z 9066-1987
|
High-voltage components for television equipment
|
|
SJ/Z 9067-1987
|
Implosion-protected cathode-ray tubes for television equipment
|
|
SJ/Z 9068-1987
|
Antenna discharge unit
|
|
SJ/Z 9069-1987
|
Wire connection board
|
|
SJ/Z 9070-1987
|
Special fuses for radio and television equipment
|
|
SJ/Z 9071-1987
|
Binary floating-point arithmetic for microprocessor system
|
|
SJ/Z 9072.1-1987
|
Calculation of effective parameters of magnetic parts
|
|
SJ/Z 9072.2-1987
|
Dimensions of cross-core (X-core) made of magnetic oxides and its accessories
|
|
SJ/Z 9072.3-1987
|
(Transformer and inductor cores manufacturer catalogs information on ferrite materials)
|
|
SJ/Z 9072.4-1987
|
Axial lead cores made of magnetic oxides or iron powder
|
|
SJ/Z 9073.1-1987
|
All-or-nothing electrical relays
|
|
SJ/Z 9073.2-1987
|
Electrical relays--Part 5: Insulation tests for electrical relays
|
|
SJ/Z 9073.3-1987
|
Electrical relays--Part 15: Enderance tests for electrical relay contacts--Specification for the characterics of test equipment
|
|
SJ/Z 9073.4-1987
|
Electrical relays--Part 18: Dimensions for general purpose all-or-nothing relays
|
|
SJ/Z 9074.1-1987
|
Expression of properties of cathode-ray oscilloscopes--Part 1: General
|
|
SJ/Z 9074.2-1987
|
Expression of the properties of cathode-ray oscilloscops. Part 2: Storage oscilloscopes
|
|
SJ/Z 9075-1987
|
Expression of the properties of sampling oscilloscopes
|
|
SJ/Z 9076-1987
|
Expression of the properties of logic analyzers
|
|
SJ/Z 9077-1987
|
Accompanying documents of electronic measuring instrument
|
|
SJ/Z 9078-1987
|
Expression method of properties for signal generators
|