|
Std ID |
Description (Standard Title) |
|
SJ/Z 3206.5-1989
|
Treatment methods for sensitized plate and film photograph for chemical analysis using spectrum
|
|
SJ/Z 3206.6-1989
|
Shapes and dimensions of graphite electrode for emision spectrum
|
|
SJ/Z 3206.7-1989
|
Geneeral rules for preparation and sampling sample for emission spectrum analysis
|
|
SJ/Z 3206.8-1989
|
Geneeral rules for preparation of standard sample for spectrum analysis
|
|
SJ/Z 3206.9-1989
|
Methods for inspection of standard samples or sample uniformity
|
|
SJ/Z 3216-1989
|
Preservation, Packaging and packing levels for electronic products
|
|
SJ/Z 3220-1989
|
Edited figures for typical structures of cabinets and cases made of aluminium alloys
|
|
SJ/Z 3229-1989
|
Guidelines for quality assurance system of color television sets
|
|
SJ/Z 325-1972
|
(Chemical analysis of tungsten)
|
|
SJ/Z 326-1972
|
(Chemical analysis of molybdenum)
|
|
SJ/Z 327-1972
|
(Tungsten and molybdenum alloy analysis methods)
|
|
SJ/Z 328-1972
|
(Copper wire in iron-nickel alloy, copper, nickel analysis)
|
|
SJ/Z 329-1972
|
(Tungsten creep test, the high temperature treatment and metallographic examination methods)
|
|
SJ/Z 330-1972
|
Method of determination by metallurgical analysis of Nickel thickness of Nickel coated Iron strip
|
|
SJ/Z 44-1964
|
Electroplating and chemical coating--Typical processes
|
|
SJ/Z 610-1973
|
Test methods for field-excited phosphor
|
|
SJ/Z 730-1973
|
(Electron beam tube type spectrum)
|
|
SJ/Z 731-1973
|
Preferred series and types photomultiplier tubes
|
|
SJ/Z 732-1973
|
Preferred series and types of gas-filled tubes
|
|
SJ/Z 733-1973
|
Preferred series and types of X-ray tubes
|
|
SJ/Z 734-1973
|
Preferred series and types for receiving tubes
|
|
SJ/Z 736-1973
|
Preferred series and types for electronstatic control transmitting tubes
|
|
SJ/Z 819-1974
|
(Radio industry-specific process unit classification numbering)
|
|
SJ/Z 863-1974
|
(Chinese Industry Standard)
|
|
SJ/Z 863-1980
|
Preferred spectrum of values for vibration, shock and steady-state acceleration testing equipment
|
|
SJ/Z 9001.10-1987
|
Basic environmental testing procedures--Part 2: Tests--Test Z/AD: Composite temperature/humidity cyclic test
|
|
SJ/Z 9001.11-1987
|
Basic environmental testing procedures--Part 2: Tests--Test Z/AMD: Combined sequential cold, low air presure, and damp heat test
|
|
SJ/Z 9001.1-1987
|
Basic environmental testing Procedures--Part 1: General and guidance
|
|
SJ/Z 9001.12-1987
|
Basic environmental testing procedures--Part 2: Tests--Test Sa: Simulated solar radiation at ground level
|
|
SJ/Z 9001.13-1987
|
Basic environmental testing procedures--Part 2: Tests--Test J: Mould growth
|
|
SJ/Z 9001.14-1987
|
Basic environmental testing procedures--Part 2: Tests--Test Ka: Salt mist
|
|
SJ/Z 9001.15-1987
|
Basic environmental testing procedures--Part 2: Tests--Test Kb: salt mist, cyclic (sodium chloride solution)
|
|
SJ/Z 9001.16-1987
|
Basic environmental testing procedures--Part 2: Tests--Test Kc: Sulphur dioxide test for contacts and connections
|
|
SJ/Z 9001.17-1987
|
Basic environmental testing procedures--Part 2: Tests--Test Kd: Hydrogen sulphide test for contacts and connections
|
|
SJ/Z 9001.18-1987
|
Basic environmental testing procedures--Part 2: Tests--Test Fc: Vibration (sinusoidal)
|
|
SJ/Z 9001.19-1987
|
Basic environmental testing procedures--Part 2: Tests--Test Fd: Random vibration wide band-General reguirements
|
|
SJ/Z 9001.20-1987
|
Basic environmental testing procedures--Part 2: Tests--Test Fda: Random vibration wide band-Reproducibility high
|
|
SJ/Z 9001.21-1987
|
Basic environmental testing procedures--Part 2: Tests--Test Fdb: Random vibration wide band-Reproducibility medium
|
|
SJ/Z 9001.2-1987
|
Basic environmental testing procedures--Part 2: Tests--Test A: Cold
|
|
SJ/Z 9001.22-1987
|
Basic environmental testing procedures--Part 2: tests--Test Fdc: Random vibration wide band-Reproducibility low
|
|
SJ/Z 9001.23-1987
|
Basic environmental testing procedures--Part 2: Tests--Test Ea: Shock
|
|
SJ/Z 9001.24-1987
|
Basic environmental testing procedures--Part 2: Tests--Test Eb: Bump
|
|
SJ/Z 9001.25-1987
|
Basic environmental testing procedures--Part 2: Tests--Test Ec: Drop and Topple
|
|
SJ/Z 9001.26-1987
|
Basic environmental testing procedures--Part 2: Tests--Test Ed: Free fall
|
|
SJ/Z 9001.27-1987
|
Basic environmental testing procedures--Part 2: Tests--Test Ga: Acceleration, steady state
|
|
SJ/Z 9001.28-1987
|
Basic environmental testing procedures--Part 2: Tests--Test Z/AFc: Combined cold/vibration (sinusoidal)tests for both heat-dissipating and non-heat-dissipating specimens
|
|
SJ/Z 9001.29-1987
|
Basic environmental testing procedures--Part 2: Tests--Test Z/BFc: Combined high temperature/vibration (Sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimen
|
|
SJ/Z 9001.30-1987
|
Basic environmental testing procedures--Part 2: Tests--Test Q: Sealing
|
|
SJ/Z 9001.31-1987
|
Basic environmental testing procedures--Part 2: Tests--Test T: Soldering
|
|
SJ/Z 9001.3-1987
|
Basic environmental testing procedures--Part 2: Tests--Test B: Dry heat
|
|
SJ/Z 9001.32-1987
|
Basic environmental testing procedures--Part 2: Tests--Test Ta: Solderability testing by the wetting balance method
|
|
SJ/Z 9001.33-1987
|
Basic environmental testing procedures--Part 2: Tests--Test U: Rabustness of terminations and integral mounting devices
|
|
SJ/Z 9001.34-1987
|
Basic environmental testing procedures--Part 2: Tests--Test XA and guidance: Immersion in cleaning solvents
|
|
SJ/Z 9001.35-1987
|
Basic environmental testing procedures--Part 2: Tests--Guidance on change of temperature tests
|
|
SJ/Z 9001.36-1987
|
Basic environmental testing procedures--Part 2: Tests--Guidance for damp heat tests
|
|
SJ/Z 9001.37-1987
|
Basic environmental testing procedures--Part 2: Tests--Guidance to Tests Kd: Hydrogen sulphide test for contacts and connections
|
|
SJ/Z 9001.38-1987
|
Basic environmental testing procedures--Part 2: Tests--Guidance to Test Kc: Sulphur dioxide test for contacts and connections
|
|
SJ/Z 9001.39-1987
|
Basic environmental testing procedures--Part 2: Tests--Guidance on soldering tests
|
|
SJ/Z 9001.40-1987
|
Basic environmental testing procedures--Part 2: Tests--Guidance on the application of the tests of IEC publication 68 to simulate the effects of storage
|
|
SJ/Z 9001.41-1987
|
Basic environmental testing procedures--Part 2: Tests--Mounting of components equipment and other articles for dynamic tests including shock (Ea), bump (Eb), vibration (Fc and Fd) and s
|
|
SJ/Z 9001.4-1987
|
Basic environmental testing procedures--Part 2: Tests--Test N: Change of temperature
|
|
SJ/Z 9001.42-1987
|
Basic environmental testing procedures--Part 2: Tests--Test Z/AFc and Z/BFc: Combined temperature (Cold and dry heat) and vibration (sinusoidol) tests for both heat-dissiputing and
|
|
SJ/Z 9001.43-1987
|
Basic environmental testing procedures--Part 2: Tests--Guidance for solar radiation testing
|
|
SJ/Z 9001.44-1987
|
Basic environmental testing procedures--Part 3: Background information--Section One: Cold and dry heat tests
|
|
SJ/Z 9001.45-1987
|
Basic environmental testing procedures--Part 3: Background information--Section Two: Combined temperature/low air pressure tests
|
|
SJ/Z 9001.5-1987
|
Basic environmental testing procedures--Part 2: Tests--Test Ca: Damp heat, steady state
|
|
SJ/Z 9001.6-1987
|
Basic environmental testing procedures--Part 2: Tests--Test Db: Damp heat cyclic (12+12-hour cycle)
|
|
SJ/Z 9001.7-1987
|
Basic environmental testing procedures--Part 2: Tests--Test M: Low air pressure
|
|
SJ/Z 9001.8-1987
|
Basic environmental testing procedures--Part 2: Tests--Test Z/AM: Combined cold/low air pressure tests
|
|
SJ/Z 9001.9-1987
|
Basic environmental testing procedures--Part 2: Tests--Test Z/BM: Combined dry heat/low air pressure
|
|
SJ/Z 9002-1987
|
An appraisal of the problems of accelerated testing for atmospheric corrosion
|
|
SJ/Z 9003-1987
|
Test enclosures of non-injection type for constant relative humidity
|
|
SJ/Z 9006-1987
|
Guide for the inclusion of lot-by-lot and periodic inspection procedures in specifications for electronic components (or parts)
|
|
SJ/Z 9007-1987
|
Sampling plans and procedures for inspection by attributes
|
|
SJ/Z 9008.1-1987
|
Measurement of the electrical properties of microwave tubes. Part 1: Terminology
|
|
SJ/Z 9008.2-1987
|
Measurement of the electrical properties of microwave tubes. Part 2: General measurements
|
|
SJ/Z 9008.3-1987
|
Measurement of the electrical properties of microwave tubes. Part 4: Magnetrons
|
|
SJ/Z 9008.4-1987
|
Measurement of electrical properties of microwave tubes--Part 5: Low-power oscilator klystrons
|
|
SJ/Z 9008.5-1987
|
Measurement of electrical properties of microwave tubes--Part 6: High-power klystrons
|
|
SJ/Z 9008.6-1987
|
Measurement of electrical properties of microwave tubes--Part 7: Gas-filled microwave switching devices
|
|
SJ/Z 9008.7-1987
|
Measurement of electrical properties of microwave tubes--Part 8: Backward-wave oscillator tubes-Otype
|
|
SJ/Z 9008.8-1987
|
Measurement of the electrical properties of microwave tubes. Part 9: Crossed-field amplifier tubes
|
|
SJ/Z 9009-1987
|
Methods for measurement of direct interelectrode capacitances of electronic tubes and valves
|
|
SJ/Z 9010.0-1987
|
Measurements of electrical properties of electronic tubes and valves--Part 0: Precautions relating to methods of measurement of electronic tubes and valves
|
|
SJ/Z 9010.10-1987
|
Measurements of electrical properties of electronic tubes and valves--Part 10: Methods of measurement of audio-frequency output power and distortion
|
|
SJ/Z 9010.11-1987
|
Measurements of electrical properties of electronic tubes and valves--Part 11: Methods of measurement of radio-frequency output power
|
|
SJ/Z 9010.1-1987
|
Measurements of electrical properties of electronic tubes and valves--Part 1: Measurement of electrode current
|
|
SJ/Z 9010.12-1987
|
Measurements of electrical properties of electronic tubes and valves--Part 12: Methods of measuring for electrode resistance, transcondductance, amplification factor, conversion resistance and conversion transconductance
|
|
SJ/Z 9010.13-1987
|
Measurements of electrical properties of electronic tubes and valves--Part 13: Methods of measurement for emission current from hot cathodes for high-vacuum electronic tubes and valvea
|
|
SJ/Z 9010.14-1987
|
Measurements of the electrical properties of electronic tubes and valves. Part 14: Methods of measurement of radar and oscilloscope cathode-ray tubes
|
|
SJ/Z 9010.15-1987
|
Measurements of electrical properties of electronic tubes and valves--Part 15: Methods of measurement for spurious and unwanted electrode currents
|
|
SJ/Z 9010.16-1987
|
Measurements of the electrical properties of electronic tubes and valves. Part 16: Methods of measurement for television picture tubes
|
|
SJ/Z 9010.17-1987
|
Measurements of electrical properties of electronic tubes and valves--Part 17: Methods of measurement for gasfilled tubes and valves
|
|
SJ/Z 9010.18-1987
|
Measurements of electrical properties of electronic tubes and valves--Part 18: Methods of measurement for noises due to mechanical or acoustic excitations
|
|
SJ/Z 9010.19-1987
|
Measurements of electrical properties of electronic tubes and valves--Part 19: Methods of measurement for corona stabilizers
|
|
SJ/Z 9010.20-1987
|
Measurements of electrical properties of electronic tubes and valves--Part 20: Methods of measurement for thyratron pulse modulators
|
|
SJ/Z 9010.21-1987
|
Measurements of electrical properties of electronic tubes and valves--Part 21: Methods of measurement for cross-modulation in electronic tubes and valves
|
|
SJ/Z 9010.2-1987
|
Measurements of electrical properties of electronic tubes and valves--Part 2: Measurement of heater or filament current
|
|
SJ/Z 9010.22-1987
|
Measurements of the electrical properties of electronic tubes and valves. Part 22: Methods of measurement for cold cathode counting and indicator tubes
|
|
SJ/Z 9010.23-1987
|
Measurement of electrical properties of electronic tubes Part 23 Methods of measurement for vacuum pulse modulator tubes
|