Std ID |
Description (Standard Title) |
QC/T 867-2011
|
Round weld nuts
|
QC/T 868-2011
|
Plastic hexagon nuts
|
QC/T 869-2011
|
Short-cycle drawn arc welding studs
|
QC/T 870-2011
|
Double end studs. bm=1.25d
|
QC/T 871-2011
|
Double end studs. bm=2d
|
QC/T 872-2011
|
Hexagon weld nuts with flange
|
QC/T 873-2011
|
Hexalobular socket raised countersunk (oval) head self drilling screws with tapping screw thread
|
QC/T 874-2011
|
Hexalobular socket countersunk head self drilling screws with tapping screw thread
|
QC/T 875-2011
|
Hexalobular socket pan head self drilling screws with tapping screw thread
|
QC/T 876-2011
|
Hexagon collar head tapping screws for plastic
|
QC/T 877-2011
|
Hexagon flange head tapping screws for plastic
|
QC/T 878-2011
|
Hexalobular socket pan head tapping screws for plastic
|
QC/T 879-2011
|
Plastic expansion nut with open end. Type E
|
QC/T 880-2011
|
No unscrew bolt
|
QC/T 881-2011
|
Welding studs for plastic
|
QC/T 882-2011
|
Split clamps
|
QC/T 883-2011
|
Sealing plugs
|
QC/T 884-2011
|
Hexagon socket pipe magnetic plugs
|
QC/T 885-2011
|
B type spring nuts. Prevailing torque type
|
QC/T 886-2011
|
Weld studs for arc welding
|
QC/T 887-2011
|
Ventilating hose assembly
|
QC/T 888-2011
|
All-metal hexagon collar weld nuts. Prevailing torque type
|
QC/T 889-2011
|
Retainers for shafts. Type A
|
QC/T 890-2011
|
Plastic expansion nut with open end. Type D
|
QC/T 891-2011
|
Welding screws for plastic
|
QC/T 892-2011
|
Open end blind rivets with break pull mandrel and protruding head for plastic parts
|
QC/T 894-2011
|
On-board measurement methods for emissions from heavy-duty hybrid electric vehicles
|
QC/T 924-2011
|
Fuel consumption limits for heavy-duty commercial vehicles(The first stage)
|
QC/T 222-2010
|
General specifications for tipper
|
QC/T 223-2010
|
Performance test methods for tipper
|
QC/T 449-2010
|
Technical conditions and test methods of insulated and refrigerated vehicles
|
QC/T 460-2010
|
Technical specification of hydraulic cylinder for dump truck
|
QC/T 468-2010
|
Automobile radiator
|
QC/T 560-2010
|
Bulk-cement deliver tanker. Specifications and methods of performance test
|
QC/T 666.1-2010
|
Auto air-condition (HFC-134a) seal parts. Part 1: Rubber O-rings
|
QC/T 666-2010
|
Automotive air conditioning (HFC-134a) - Part 1 Seals: O -shaped rubber seals
|
QC/T 667-2010
|
Concrete truck mixer-requirements and test methods
|
QC/T 825-2010
|
The technical specification of tipper hydraulic system
|
QC/T 826-2010
|
Bridge inspection vehicle
|
QC/T 829-2010
|
Measurement methods for diesel vehicle aftertreatment devices
|
QC/T 830-2010
|
Electronic ballast for high-intensity-discharge lamp of motor vehicle
|
QC/T 831-2010
|
Technical specification of power slide for passenger car seat
|
QC/T 832-2010
|
Vehicle exhaust gas-operated water heating radiator
|
QC/T 833-2010
|
Technical specifications of pressure relief valve for automobile air conditioning system
|
QC/T 834-2010
|
Variable displacement swash plate type compressor assembly for automobile air conditioning
|
QC/T 835-2010
|
Fixed displacement compressor assembly with double headed swash plate for automobile air conditioning system
|
QC/T 836-2010
|
Classification and code of special purpose vehivle
|
QC/T 837-2010
|
Types of hybrid electric vehicles
|
QC/T 838-2010
|
Ultracapacitor electric city bus
|
QC/T 839-2010
|
Power supply system for ultracapacitor electric city bus
|
QC/T 14-2009
|
Tyre air-pressure gauge for automobile
|
QC/T 227.1-2009
|
Test methods of the friction perfamance of brake lining for motorcycles and mopeds
|
QC/T 227.2-2009
|
Test methods of the adhesive bonding shearing strength of brake lining for motorcycles and mopeds
|
QC/T 232-2009
|
Strength requirements and test methods for brake handle of motorcycles and mopeds
|
QC/T 44-2009
|
Vehicle-windshield window wiper of motor
|
QC/T 462-2009
|
Automobile engine working hourmeter
|
QC/T 60-2009
|
Methods of running test on bench for motorcycles and mopeds
|
QC/T 631-2009
|
Automotive exhaust muffler assembly technical specification and test methods
|
QC/T 633-2009
|
The seats of passenger vehicles
|
QC/T 658-2009
|
Air-conditioning refrigeration system performances road test method for motor vehicles
|
QC/T 71-2009
|
Rims of motorcycles and mopeds
|
QC/T 807-2009
|
Snow removal vehicle
|
QC/T 808-2009
|
Technical specifications for bloodmobile
|
QC/T 810-2009
|
Solenoid switch for automobile starters specification
|
QC/T 811-2009
|
The microwave maintenance vehicle for bituminous pavement
|
QC/T 812-2009
|
Specifications and test methods for oil separator for crankcase ventilation of diesel engine
|
QC/T 813-2009
|
Technical requirements for special equipments of dimethyl-ether vehicles
|
QC/T 814-2009
|
Mounting requirements of special equipment for dimethyl-ether vehicles
|
QC/T 815-2009
|
Quick- filling receptacle of DME vehicle
|
QC/T 816-2009
|
Specification of mobile hydrogen refueling vehicles
|
QC/T 817-2009
|
Durability requirements and testing methods of reed valve type second air injectors for motorcycles and mopeds
|
QC/T 819-2009
|
Frame of two-wheel motorcycle and two-wheel moped
|
QC/T 820-2009
|
Stepper motor for automobile and motorcycle instrument
|
QC/T 821-2009
|
Engine cold-water and oil temperature sensor for automobile
|
QC/T 822-2009
|
Engine oil pressure sensor for automobile
|
QC/T 824-2009
|
Tachometer sensor for automobile
|
QC 001002-4-2008
|
IEC Quality Assessment System for Electronic Components (IECQ) - Rules of procedure - Part 4: Avionics assessment program requirements
|
QC/T 235-2008
|
Specification and test methods for exhaust muffler of motorcycles and mopeds
|
QC/T 275-2008
|
Metallographic examination of piston with ringcarrier for automotive engines
|
QC/T 311-2008
|
Performance requirements and bench test methods of automobile brake master cylinder
|
QC/T 553-2008
|
Metallographic examination of piston for engines of automobile and motorcycle
|
QC/T 61-2008
|
Specifications and test methods on intensifying test of engine of motorcycles and mopeds
|
QC/T 626-2008
|
Motor vehicles-window regulators
|
QC/T 79.1-2008
|
Road vehicles. Coiled pipe assemblies for pneumatic braking connection between motor vehicles and towed vehicles. Part 1: Dimensions
|
QC/T 79.2-2008
|
Road vehicles. Coiled tube assemblies for air brake connection between towing and towed vehicles. Part 2: Performance requirements
|
QC/T 796-2008
|
Automobile fuel consumption labels
|
QC/T 798-2008
|
Multilayers plastic tubing for automotive fuel system
|
QC/T 799-2008
|
Telescopic belt truck conveyer
|
QC/T 800-2008
|
Method of bed test of continuously variable transmission for motorcycles and mopeds
|
QC/T 801-2008
|
Technical requirements and testing methods of reed valve type second air injectors for motorcycles and mopeds
|
QC/T 802-2008
|
General principles of drawing and document for motorcycles and mopeds
|
QC/T 803.1-2008
|
Technical specification of the oxygen sensor for motor vehicles. Part 1: Tube type heated lambda sensor
|
QC/T 804-2008
|
Instrument panel for passenger cars
|
QC/T 805-2008
|
Passenger car. Technique specification of slide for seat
|
QC/T 806-2008
|
Technical specification of electromagnetic clutch for compressor of A/C
|
QC/T 208-2007
|
Temperature alarms for automobile
|
QC/T 209-2007
|
Flexible shaft for automobile and motorcycle
|
QC/T 213-2007
|
Automobile and motorcycle instrument terminology
|
QC/T 215-2007
|
Type methodology for automobile and motorcycle instrument
|
QC/T 217-2007
|
Pressure alarms for automobile
|