Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

QC/T 222-2025 English PDF

US$359.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
QC/T 222-2025: Dump truck
Status: Valid

QC/T 222: Historical versions

Standard IDUSDBUY PDFLead-DaysStandard Title (Description)Status
QC/T 222-2025359 Add to Cart 4 days Dump truck Valid
QC/T 222-2010229 Add to Cart 3 days General specifications for tipper Valid
QC/T 222-1997439 Add to Cart 4 days (Dump Truck General technical conditions) Obsolete


Basic data

Standard ID: QC/T 222-2025 (QC/T222-2025)
Description (Translated English): Dump truck
Sector / Industry: Automobile & Vehicle Industry Standard (Recommended)
Classification of Chinese Standard: T53
Classification of International Standard: 43.160
Word Count Estimation: 18,115
Date of Issue: 2025-05-09
Date of Implementation: 2025-11-01
Older Standard (superseded by this standard): QC/T 222-2010, QC/T 223-2010
Issuing agency(ies): Ministry of Industry and Information Technology of the People's Republic of China

QC/T 222-2025: Dump truck

---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/QCT222-2025
Automobile Industry Standards of the People's Republic of China Dump Truck Replace QC/T 222-2010, QC/T 223-2010 Released on May 9, 2025 2025-11-01 Implementation CCS T 53 ICS 43.160 Ministry of Industry and Information Technology of the People's Republic of China issued Preface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Technical Requirements 5 5 Test methods 8 6 Inspection Rules 10 7 Identification and accompanying documents 11

Table of Contents

Preface This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces QC/T 222-2010 "General Technical Specifications for Dump Trucks" and QC/T 223-2010 "Test Methods for Dump Trucks", except In addition to structural adjustments and editorial changes, the main technical changes are as follows. --Changed the scope of application of the document (see Chapter 1, Chapter 1 of QC/T 222-2010); -- Added dump trucks, lift dump trucks, conveyor dump trucks, horizontal dump trucks, push dump trucks, and the largest Lifting angle, sideboard locking device, maximum closing angle, fully open angle, cargo box top cover, cargo box internal length, cargo box internal height, cargo box Definition of internal width (see 3.1, 3.1.1, 3.1.2, 3.1.3, 3.1.4, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9); -- Deleted the requirements for fire extinguishers (see 3.14 of QC/T 222-2010); -- Deleted the requirements for lubricating oil (see 3.16 of QC/T 222-2010); --Deleted the requirement for the difference between the maximum lift angle and the design value (see 3.18 of QC/T 222-2010); -- The requirement that the performance of dump trucks must comply with the design requirements for Class II chassis has been deleted (see 3.7 of QC/T 222-2010); -- Changed the requirements for dump truck alarm devices (see 4.1.4.1, 3.22 of QC/T 222-2010); --Added the requirements for the speed of dump trucks when the cargo box of the lifted dump truck is not reset (see 4.1.4.4); --Added safety warning sign requirements for dump truck operating devices (see 4.1.4.5); --Added requirements for limit devices of lift dump trucks (see 4.1.4.6); --Added requirements for support devices of lift-type dump trucks (see 4.1.4.7); --Added stability requirements for lift dump trucks (see 4.1.4.8 and 4.1.4.9); --Added requirements for articulated locking devices for lift dump trucks (see 4.1.4.10); --Added translation speed requirements for translation dump trucks (see 4.1.5.2); --Added unloading speed requirements for conveyor dump trucks (see 4.1.5.3); --Added unloading speed requirements for push-type dump trucks (see 4.1.5.4); --Added the requirements for the residual rate of unloading (see 4.1.5.5); --Reliability requirements have been changed (see 4.1.5.6, 3.23 of QC/T 222-2010); --Changed the requirements for cargo containers (see 4.2, 3.20, 3.24, and 3.25 of QC/T 222-2010); --Added general requirements and performance requirements for reversing valves (see 4.3.10); --Added hydraulic system requirements (see 4.3); --Added relevant requirements for electric lifting systems (see 4.4); --Added top cover requirements (see 4.6); --Added requirements for guardrail locking devices (see 4.7); --Changed the measurement method of dimensional parameters (see 5.2, 3.1 of QC/T 223-2010); --The quality parameter measurement method has been changed (see 5.3, 3.2 of QC/T 223-2010); --The test method for self-degradation has been changed (see 5.7, 3.4 of QC/T 223-2010); --The test method for the self-unloading performance test has been changed (see 5.8, 3.3 of QC/T 223-2010); --Deleted the test of solid contamination of hydraulic oil in hydraulic system (see 3.5 of QC/T 223-2010); --Deleted the test method for the lift alarm device (see 3.7 of QC/T 223-2010); --Added the top cover test method (see 5.12); --Changed the factory inspection requirements (see 6.1, 4.1 of QC/T 222-2010); --Changed the type inspection requirements (see 6.2, 4.2 of QC/T 222-2010); -- Changed the labeling requirements (see 7.1, 5.1 of QC/T 222-2010); --Deleted the instruction manual requirements (see 5.2 of QC/T 222-2010); --Changed the requirements for accompanying documents (see 7.2, 6.1 of QC/T 222-2010); --Transportation and storage requirements have been deleted (see 6.2 and 6.3 of QC/T 222-2010). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed and coordinated by the National Technical Committee for Standardization of Automotive Products (SAC/TC 114). This document was drafted by. China National Heavy Duty Truck Group Qingdao Heavy Industry Co., Ltd., Chitian Automobile Co., Ltd., Sany Special Automobile Co., Ltd. Company, Haiwo Machinery (China) Co., Ltd., China National Heavy Duty Truck Group Hubei Huawei Special Purpose Vehicle Co., Ltd., Hebei Xinhongchang Heavy Industry Group, Henan Juntong Vehicle Co., Ltd., Qingte Group Co., Ltd., CIMC Vehicles (Shaanxi) Automobile Co., Ltd., Jiangxi Jiangling Group Special Purpose Vehicle Co., Ltd., Sinotruk Liuzhou Yunli Special Purpose Vehicle Co., Ltd., Hunan Valin Lianyuan Steel Co., Ltd., and China Automotive Research Institute Automobile Inspection Center (Wuhan) Co., Ltd., Wuzheng Environmental Protection Technology Co., Ltd., Suizhou Product Quality Supervision and Inspection Institute, BYD Auto Industry Co., Ltd., Dongfeng Motor Co., Ltd., CIMC Vehicles (Jiangmen) Co., Ltd., Tongya Automobile Manufacturing Co., Ltd., Dongfeng Commercial Vehicle Co., Ltd., Shandong Wuzheng Group Co., Ltd., Hanyang Special Purpose Vehicle Research Institute. The main drafters of this document are. Cheng Xiaodong, Hu Yan, Liu Zhu, Cai Lianying, Liu Dongwei, Yang Wuhong, Li Xuesong, Zhang Lin, Zhang Shigong, Kong Fei, Tan Aiguo, Liao Jing, Li Hui, Feng Huijian, Jiang Wenjuan, Fang Kekui, Zheng Xinghua, Li Hang, Liu Dongdong, Yang Fengqin, Zhao Jing, Ding Chuanjie, Yang Cong, Si Minjie, Yan Weiwei, Dai Xiaojian, Tang Shengjun, Li Guizi, Cao Qi, Ou Lizhou, Yu Bin, Jiang Chunling, Liang Liang, Liu Cheng, Lin Wengan, Tian Zhongmeng, Wei Changhe, Zhang Qingfu, Hu Chao, Li Bo. The previous versions of this document and the documents it replaces are as follows. --First published in 1985 as JBn 4047.1-85; --First issued in.1997 as QC/T 222-1997; --First revised in.2010; --This is the second revision, incorporating the contents of QC/T 223-2010 "Test Methods for Dump Trucks" (QC/T 223-2010 The replacement documents and previous versions of the "Dump Truck Test Method" are JBn 4047.2-85 "Dump Truck Performance Test Method", QC/T 223-1997 "Test methods for dump trucks"). Dump Truck 1 Scope This document specifies the technical requirements, test methods, inspection rules, markings and accompanying documents for dump trucks. This document applies to dump trucks modified from Class II chassis of standard vehicles. 2 Normative references The contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to this document. document. GB 1589 External dimensions, axle loads and mass limits for motor vehicles, trailers and motor vehicle trains GB/T 3639 Cold drawn or cold rolled precision seamless steel tube GB/T 3766 General rules and safety requirements for hydraulic transmission systems and their components GB 7258 Technical conditions for motor vehicle operation safety GB/T 12534 General rules for road test methods for motor vehicles GB/T 14172 Bench test method for static roll stability of vehicles, trailers and vehicle trains GB/T 18411 Motor Vehicle Product Labels GB/T 25610 Earth-moving machinery dump truck cargo box support device and cab tilt support device GB/T 38900 Motor Vehicle Safety Technical Inspection Items and Methods GB/T 40494 Motor Vehicle Product Instructions BB/T 0037-2012 Double-sided coated polyvinyl chloride flame retardant waterproof cloth and tarpaulin JB/T 5943 General technical requirements for welding parts of construction machinery JB/T 7039 Hydraulic vane pump JB/T 7041 (all parts) Hydraulic pumps JB/T 8727 Hydraulic hose assembly JB/T 8729 Hydraulic multi-way reversing valve QC/T 319 Special-purpose vehicle power take-off QC/T 460 Technical Specifications for Dump Truck Hydraulic Cylinders QC/T 484 Automobile Paint Coating QC/T 625 Coatings and chemical treatment layers for automobiles QC/T 644 Technical requirements for automobile metal fuel tanks QC/T 29104 Limits of solid particle contamination of hydraulic oil in special-purpose vehicle hydraulic systems 3 Terms and Definitions The following terms and definitions apply to this document.
......
Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of QC/T 222-2025_English be delivered?

Answer: Upon your order, we will start to translate QC/T 222-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of QC/T 222-2025_English with my colleagues?

Answer: Yes. The purchased PDF of QC/T 222-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version QC/T 222-2025?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version QC/T 222-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.