|
Std ID |
Description (Standard Title) |
|
JB/T 7626-2013
|
Testing methods for reverse-blocking triode thyristors
|
|
JB/T 7627-1994
|
Detail specification for KG5, KG10 and KG200 case-rated turn-off thyristors
|
|
JB/T 7628-1994
|
(KN Series 100A/60A to 400A/400A case - rated reverse conducting thyristor triode detailed specification)
|
|
JB/T 7629-1994
|
Specification for design and installation of refractory fiber furnace lining
|
|
JB/T 7630.1-1998
|
Microglass fiber separator for lead acid storage batteries
|
|
JB/T 7630.1-2008
|
Glass micro-fiber for lead-acid batteries
|
|
JB/T 7630.2-1998
|
Microporous rubber separator for lead acid storage batteries
|
|
JB/T 7630.2-2008
|
Microporous rubber separators for lead-acid batteries
|
|
JB/T 7630.3-1998
|
Sintered polyvinyl chloride separator for lead acid storage batteries
|
|
JB/T 7630.3-2008
|
Sintered polyvinyl chloride separators for lead-acid batteries
|
|
JB/T 7630.4-1998
|
Melt-blown polypropyrene separator for lead storage batteries
|
|
JB/T 7630.4-2008
|
Melt-spray polypropylene separators for lead-acid batteries
|
|
JB/T 7630.5-1998
|
Microporous polyethylene separator for lead acid storage batteries
|
|
JB/T 7630.5-2008
|
Microporous polyethylene separators for lead-acid batteries
|
|
JB/T 7630-1994
|
(Lead-acid batteries ultra-fine glass fiber separator)
|
|
JB/T 7631-1994
|
Electronic thermo-controllers for transformers
|
|
JB/T 7631-2005
|
Electronic thermo-controllers for transformers
|
|
JB/T 7632-1994
|
(Oil-type series reactor core Test Guidelines)
|
|
JB/T 7632-2006
|
Test guide for series reactors
|
|
JB/T 7633-1994
|
(Transformer oil cooler with strong spiral plate)
|
|
JB/T 7633-2007
|
Spiral-type forced-oil and water coolers for transformer
|
|
JB/T 7634-1994
|
(Low-power motor slot insulation inserting machine)
|
|
JB/T 7634-2004
|
Statorslot insulation inserting machine
|
|
JB/T 7635-1994
|
(Battery truck machine test methods)
|
|
JB/T 7636-1994
|
(Battery handling vehicle type spectrum)
|
|
JB/T 7637-1994
|
(Large ring coil taping machine technical conditions)
|
|
JB/T 7638-1994
|
(Humid Tropics secondary circuit with the power system control and protection screen (cabinet/desk) technical requirements)
|
|
JB/T 7638-2002
|
Specification for control and protection panel (cabinet, desk) of secondary circuit of power system in heat and moisture environment
|
|
JB/T 7639.1-1994
|
Metal cold stampings for relays and accessories. General technical conditions
|
|
JB/T 7639.2-1994
|
Metal cold stampings for relays and accessories. Tolerance
|
|
JB/T 7640-1994
|
(Double-click the turbine series type spectrum)
|
|
JB/T 7641.1-1994
|
Specifications for electric drive mining dumper
|
|
JB/T 7641.2-1994
|
Test method for electric drive mining dumper
|
|
JB/T 7642.1-1994
|
(Universal die die holder. Daibing round punch holder)
|
|
JB/T 7642.2-1994
|
(Universal die die holder. Daibing rectangle mold base)
|
|
JB/T 7642.3-1994
|
(A Common die die die holder seat)
|
|
JB/T 7642.4-1994
|
(General. B die die die holder seat)
|
|
JB/T 7642.5-1994
|
(Universal die die holder. Flexural modulus die holder)
|
|
JB/T 7642.6-1995
|
(Die universal mold base - steel mold base)
|
|
JB/T 7642.7-1995
|
(Die universal mold base - mold base)
|
|
JB/T 7642.8-1995
|
(Die universal mold base -C type lower die)
|
|
JB/T 7643.1-1994
|
(Die template rectangular recessed template)
|
|
JB/T 7643.1-2008
|
Stamping die plates. Part 1: Rectangular die plates
|
|
JB/T 7643.2-1994
|
(Die template rectangular fixed plate)
|
|
JB/T 7643.2-2008
|
Stamping die plates. Part 2: Rectangular retaining plates
|
|
JB/T 7643.3-1994
|
(Die template rectangular plate)
|
|
JB/T 7643.3-2008
|
Stamping die plates. Part 3: Rectangular bolster plates
|
|
JB/T 7643.4-1994
|
(Die template concave circular template)
|
|
JB/T 7643.4-2008
|
Stamping die plates. Part 4: Round die plates
|
|
JB/T 7643.5-1994
|
(Die template circular fixing plates)
|
|
JB/T 7643.5-2008
|
Stamping die plates. Part 5: Round retaining plates
|
|
JB/T 7643.6-1994
|
(Die template circular plate)
|
|
JB/T 7643.6-2008
|
Stamping die plates. Part 6: Round bolster plates
|
|
JB/T 7644.1-1994
|
(Single punch die template single punch plate)
|
|
JB/T 7644.1-2008
|
Single punch plates of stamping dies. Part 1: Retaining plates for single punches
|
|
JB/T 7644.2-1994
|
(Single punch die template single punch plate)
|
|
JB/T 7644.2-2008
|
Single punch plates of stamping dies. Part 2: Bolster plates for single punches
|
|
JB/T 7644.3-1994
|
(Single punch die template. Partial loaded single punch plate)
|
|
JB/T 7644.3-2008
|
Single punch plates of stamping dies. Part 3: Retaining plates for side-fixed single punches
|
|
JB/T 7644.4-1994
|
(Single punch die template. Partial loaded single punch plate)
|
|
JB/T 7644.4-2008
|
Single punch plates of stamping dies. Part 4: Bolster plates for side-fixed single punches
|
|
JB/T 7644.5-1994
|
(Single punch die template. Ball Lock single punch plate)
|
|
JB/T 7644.5-2008
|
Single punch plates of stamping dies. Part 5: Retaining plates for ball-locked single punches
|
|
JB/T 7644.6-1994
|
(Single punch die template. Ball Lock single punch plate)
|
|
JB/T 7644.6-2008
|
Single punch plates of stamping dies. Part 6: Bolster plates for ball-locked single punches
|
|
JB/T 7644.7-1994
|
(Single punch die template. Partial ball locking single punch plate)
|
|
JB/T 7644.7-2008
|
Single punch plates of stamping dies. Part 7: Retaining plates for ball-locked side-fixed single punches
|
|
JB/T 7644.8-1994
|
(Single punch die template. Partial single punch ball locking plate)
|
|
JB/T 7644.8-2008
|
Single punch plates of stamping dies. Part 8: Bolster plates for ball-locked side-fixed single punches
|
|
JB/T 7645.1-1994
|
(Small die guide. A guide column)
|
|
JB/T 7645.1-2008
|
Guide units of stamping dies. Part 1: Small guide pillars. Type A
|
|
JB/T 7645.2-1994
|
(B Die guide Small guide column)
|
|
JB/T 7645.2-2008
|
Guide units of stamping dies. Part 2: Small guide pillars. Type B
|
|
JB/T 7645.3-1994
|
(Die guide Small guide sleeve)
|
|
JB/T 7645.3-2008
|
Guide units of stamping dies. Part 3: Small guide bushes
|
|
JB/T 7645.4-1994
|
(Die guide. Plate fixed guide column)
|
|
JB/T 7645.4-2008
|
Single punch plates of stamping dies. Part 8: Bolster plates for ball-locked side-fixed single punches
|
|
JB/T 7645.5-1994
|
(Die guide. Plate fixed bushing)
|
|
JB/T 7645.5-2008
|
Guide units of stamping dies. Part 5: Plate-fixed guide pillars
|
|
JB/T 7645.6-1994
|
(Die guide means. Platen)
|
|
JB/T 7645.6-2008
|
Guide units of stamping dies. Part 6: Clamping plates
|
|
JB/T 7645.7-1994
|
(Die guide. Guide column seat)
|
|
JB/T 7645.7-2008
|
Guide units of stamping dies. Part 7: Guide pillar holders
|
|
JB/T 7645.8-1994
|
(Die guide. Bushing seat)
|
|
JB/T 7645.8-2008
|
Guide units of stamping dies. Part 8: Guide bush holders
|
|
JB/T 7646.1-1994
|
(Shank die. Pressure-molded handle)
|
|
JB/T 7646.1-2008
|
Stamping die shanks. Part 1: Press-fit die shanks
|
|
JB/T 7646.2-1994
|
(Die mold handle. Screw Shank)
|
|
JB/T 7646.2-2008
|
Stamping die shanks. Part 2: Screwed die shanks
|
|
JB/T 7646.3-1994
|
(Die mold handle flange Shank)
|
|
JB/T 7646.3-2008
|
Stamping die shanks. Part 3: Flanged die shanks
|
|
JB/T 7646.4-1994
|
(Shank die. Trough Shank)
|
|
JB/T 7646.4-2008
|
Stamping die shanks. Part 4: Slotted die shanks
|
|
JB/T 7646.5-1994
|
(Die mold handle Floating Shank)
|
|
JB/T 7646.5-2008
|
Stamping die shanks. Part 5: Self-centering die shanks
|
|
JB/T 7646.6-1994
|
(Die mold handle. Push activity Shank)
|
|
JB/T 7646.6-2008
|
Stamping die shanks. Part 6: Pushed-in movable die shanks
|
|
JB/T 7646.7-1995
|
(Die die handle - Universal Shank)
|
|
JB/T 7647.1-1994
|
(Die guide pins are being sold. A Pilot)
|
|
JB/T 7647.1-2008
|
Pilot pins of stamping dies. Part 1: Pilot pins. Type A
|