|
Std ID |
Description (Standard Title) |
|
JB/T 7595-1994
|
(ZSL4 series (IP23S) DC motor (frame sizes 100 to 160))
|
|
JB/T 7595-2006
|
Specification for series ZSL4 (IP23S) direct current mortor (frame size 100~160)
|
|
JB/T 7596-1994
|
Technical specification for charging generator intended to be used in watercrafts
|
|
JB/T 7596-2010
|
Specification of charging generating set in ships
|
|
JB/T 7597.1-1994
|
(YZ-H series marine crane with a three-phase asynchronous motors. Technical conditions)
|
|
JB/T 7597-1994
|
(YZ-H series marine crane with a three-phase induction motors)
|
|
JB/T 7597-2007
|
Specification for series YZ-H three phase asynchronous motor for crane in ships
|
|
JB/T 7598-1994
|
(Resistance welding electrode of copper, chromium, zirconium alloys)
|
|
JB/T 7598-2008
|
Resistance welding electrodes alloys of Cu-Cr-Zr
|
|
JB/T 7599.10-2013
|
Insulating enamel for enamelled winding wires. Part 10: Polyurethane enamel, class 180
|
|
JB/T 7599.11-2013
|
Insulating enamel for enamelled winding wires. Part 11: Self-bonding enamel based on polyvinyl butyral resin
|
|
JB/T 7599.1-1994
|
Insulating paint for enameled winding wire Part 1 General regulations
|
|
JB/T 7599.1-2013
|
Insulating enamel for enamelled winding wires. Part 1: General requirements
|
|
JB/T 7599.12-2013
|
Insulating enamel for enamelled winding wires. Part 12: Self-bonding enamel based on polyamide resin
|
|
JB/T 7599.13-2013
|
Insulating enamel for enamelled winding wires. Part 13: Self-bonding enamel based on aromatic polyamide resin
|
|
JB/T 7599.14-2013
|
Insulating enamel for enamelled winding wires. Part 14: Self-bonding enamel based on epoxy resin
|
|
JB/T 7599.2-1994
|
Insulating paint for enameled winding wire Part 2 Acetal wire-covering enamel class 120
|
|
JB/T 7599.2-2013
|
Insulating enamel for enamelled winding wires. Part 2: Polyvinyl acetal enamel, class 120
|
|
JB/T 7599.3-1994
|
Insulating paint for enameled winding wire Part 3 Polyester wire enamel class 130
|
|
JB/T 7599.3-2013
|
Insulating enamel for enamelled winding wires. Part 3: Polyester enamel, class 130
|
|
JB/T 7599.4-1994
|
Insulating paint for enameled winding wire Part 4 Polyurethane wire enamel class 130
|
|
JB/T 7599.4-2013
|
Insulating enamel for enamelled winding wires. Part 4: Polyurethane enamel, class 130
|
|
JB/T 7599.5-1994
|
Insulating paint for enameled winding wire Part 5 Modified polyester wire lacquer class 155
|
|
JB/T 7599.5-2013
|
Insulating enamel for enamelled winding wires. Part 5: Polyester enamel, class 155
|
|
JB/T 7599.6-1994
|
Insulating paint for enameled winding wire Part 6 Polyester imine wire enamel class 180
|
|
JB/T 7599.6-2013
|
Insulating enamel for enamelled winding wires. Part 6: Polyesterimide enamel, class 180
|
|
JB/T 7599.7-1994
|
Insulating paint for enameled winding wire Part 7 Polyamide (imide) wire enamel class 200
|
|
JB/T 7599.7-2013
|
Insulating enamel for enamelled winding wires. Part 7: Polyamide-imide enamel, class 200
|
|
JB/T 7599.8-1994
|
Insulating paint for enameled winding wire Part 8: Polyimide wire enamel class 220
|
|
JB/T 7599.8-2013
|
Insulating enamel for enamelled winding wires. Part 8: Aromatic poly-imide enamel, class 240
|
|
JB/T 7599.9-2013
|
Insulating enamel for enamelled winding wires. Part 9: Polyurethane enamel, class 155
|
|
JB/T 7600.1-1994
|
(Wire and cable reels PNS type machine - Part 1: General requirements)
|
|
JB/T 7600.1-2008
|
PNS-type machine spool for processing of electric wire and cable. Part 1: General
|
|
JB/T 7600.2-1994
|
(PNS-type machine wire and cable reel - Part 2: steel welding machine with reels)
|
|
JB/T 7600.2-2008
|
PNS-type machine spool for processing of electric wire and cable. Part 2: Machine spool with welded steel plate
|
|
JB/T 7600.3-1994
|
(PNS-type machine wire and cable reel - Part 3: steel stamping crimping machine reels)
|
|
JB/T 7600.3-2008
|
PNS-type machine spool for processing of electric wire and cable. Part 3: Machine spool with stamped steel plate
|
|
JB/T 7600.4-1994
|
(PNS-type machine wire and cable reels Part 4: corrugated machine reels)
|
|
JB/T 7600.4-2008
|
PNS-type machine spool for processing of electric wire and cable. Part 4: Machine spool with corrugated plate
|
|
JB/T 7600.5-1994
|
(PNS-type machine wire and cable reels Part 5: Plastic machine reels)
|
|
JB/T 7600.5-2008
|
PNS-type machine spool for processing of electric wire and cable. Part 5: Plastic machine spool
|
|
JB/T 7601.10-1994
|
(Wire and cable equipment basic technical requirements Part 10: Electrical control device)
|
|
JB/T 7601.10-2008
|
Part 10 wire and cable equipment basic technical requirements: Electrical control device
|
|
JB/T 7601.11-1994
|
(Wire and cable equipment basic technical requirements - Part 11: Appearance Quality)
|
|
JB/T 7601.11-2008
|
Wire and cable equipment basic technical requirements - Part 11: Quality
|
|
JB/T 7601.1-1994
|
(Wire and cable equipment basic technical requirements - Part 1: General requirements)
|
|
JB/T 7601.1-2008
|
Equipments for electric wires and cables. Basic technical requirements. Part 1: General
|
|
JB/T 7601.2-1994
|
(Wire and cable equipment basic technical requirements - Part 2: Inspection and Acceptance)
|
|
JB/T 7601.2-2008
|
Equipments for electric wires and cables. Basic technical requirements. Part 2: Inspection and acceptance
|
|
JB/T 7601.3-1994
|
(Wire and cable equipment basic technical requirements - Part 3: Castings)
|
|
JB/T 7601.3-2008
|
Equipments for electric wires and cables. Basic technical requirements. Part 3: Casting
|
|
JB/T 7601.4-1994
|
(Wire and cable equipment basic technical requirements - Part 4: weldments)
|
|
JB/T 7601.4-2008
|
Equipments for electric wires and cables. Basic technical requirements. Part 3: Weldments
|
|
JB/T 7601.5-1994
|
(Wire and cable equipment basic technical requirements - Part 5: Forging)
|
|
JB/T 7601.5-2008
|
Equipments for electric wires and cables. Basic technical requirements. Part 5: Forgings
|
|
JB/T 7601.6-1994
|
(Wire and cable equipment basic technical requirements - Part 6: Machining)
|
|
JB/T 7601.6-2008
|
Equipments for electric wires and cables. Basic technical requirements. Part 6: Machining process
|
|
JB/T 7601.7-1994
|
(Wire and cable equipment basic technical requirements - Part 7: Heat Treatment)
|
|
JB/T 7601.7-2008
|
Equipments for electric wires and cables. Basic technical requirements. Part 7: Heat treatment
|
|
JB/T 7601.8-1994
|
(Wire and cable equipment basic technical requirements - Part 8: Surface treatment)
|
|
JB/T 7601.8-2008
|
Equipments for electric wires and cables. Basic technical requirements. Part 8: Surface treatment
|
|
JB/T 7601.9-1994
|
(Wire and cable equipment basic technical requirements - Part 9: Assembly)
|
|
JB/T 7601.9-2008
|
Equipments for electric wires and cables. Basic technical requirements. Part 9: Assembling
|
|
JB/T 760-1968
|
Glass cell
|
|
JB/T 7603-1994
|
Design guideline of Stove-piped HRSG
|
|
JB/T 7604.1-1994
|
Locking type steel wire turnbuckles Type and dimension
|
|
JB/T 7604.2-1994
|
Internal thread used for installation of steel wire turnbuckles
|
|
JB/T 7604.3-1994
|
Locking type steel wire turnbuckles Technical conditions
|
|
JB/T 7604.4-1994
|
Locking type steel wire turnbuckles Installation requirement
|
|
JB/T 7605-1994
|
Rated power, voltage and rotation rate of mobile generator sets
|
|
JB/T 7606-1994
|
Technical requirements for general assembly of electric power stations with internal combustion engines
|
|
JB/T 7607-1994
|
(Vertical motor bearing LYJH type oil cooler)
|
|
JB/T 7607-2005
|
Type-LYJH oil cooler for bearings of vertical electrical machines
|
|
JB/T 7608-1994
|
(High voltage AC motor coil dielectric loss tangent test methods and limits)
|
|
JB/T 7608-2006
|
Test method and limited value of loss factor of coil for HV and AC electric machine
|
|
JB/T 7609-1994
|
(Strength carbon graphite material impact test method)
|
|
JB/T 7609-2006
|
Test method of resistant impact strength for carbon. graphite material
|
|
JB/T 7610-1994
|
Test specification for boiler pulverized coal combustion characteristic
|
|
JB/T 7611-1994
|
Test specification for determination of ignition index of pulverized coal boiler
|
|
JB/T 7612-1994
|
(Particle size distribution of the pulverized coal boiler test specifications)
|
|
JB/T 7613-1994
|
General technical specifications for packaging of power capacitor products
|
|
JB/T 7613-2013
|
General specifications for power capacitor products packing
|
|
JB/T 7614-1994
|
General technical specifications for alternating-current torque motors
|
|
JB/T 7614-2016
|
General specification for AC torque motors
|
|
JB/T 7615-1994
|
Terminology of electrotechnics Special equipments for electro-ceramics
|
|
JB/T 7616-1994
|
Steep current impulse resistance test for insulator of high-tension lines
|
|
JB/T 7617-1994
|
Sulfur hexafluoride pot-type metal-oxide surge arrester without gaps
|
|
JB/T 7618-1994
|
Leakage test for surge arresters Bath method
|
|
JB/T 7618-2011
|
Sealing tests of surge arresters
|
|
JB/T 7619-1994
|
Test method for two-way triple pole thyristors
|
|
JB/T 7620-1994
|
Compensation type AC voltage regulators
|
|
JB/T 7621-1994
|
(Power semiconductor device technology with high water)
|
|
JB/T 7622-1994
|
Organosilicone lacquer intended to be used in power semiconductor device production process
|
|
JB/T 7623-1994
|
Case of rectifier diodes intended to be used in motor vehicles
|
|
JB/T 7624-1994
|
Test method for rectifier diodes
|
|
JB/T 7624-2013
|
Testing methods for rectifier diodes
|
|
JB/T 7625.1-1994
|
(Thyristor module test methods. General)
|
|
JB/T 7625.2-1994
|
Test method for thyristor modules Pair of arms and anti-parallel pair of arms
|
|
JB/T 7625.3-1994
|
Test method for thyristor modules Single-phase bridges and triphase bridges
|
|
JB/T 7626-1994
|
Test method for reverse blocking triple pole thyristors
|