Search result: GB/T 28500-2012
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 28500-2012 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Technical requirements of 900/1800 MHz TDMA digital cellular mobile network signaling system NO.7 ISUP
| Valid |
GB/T 28500-2012
|
| Standard ID | GB/T 28500-2012 (GB/T28500-2012) | | Description (Translated English) | Technical requirements of 900/1800 MHz TDMA digital cellular mobile network signaling system NO.7 ISUP | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | M12 | | Classification of International Standard | 33.040.30 | | Word Count Estimation | 127,141 | | Quoted Standard | GF 001-9001; YDN 038-1997; YD/T 910.3; YD/T 913; ITU-T Q.118; ITU-T Q.703; ITU-T Q.704; ITU-T Q.730; ITU-T Q.761; ITU-T Q.763; ITU-T Q.764; ITU-T Q.850 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the 900/1 800 MHz TDMA digital cellular mobile communication network application protocol ISUP message formats and encoding parameters, ISUP call flow, ISUP supplementary service call flow, as well as with other signaling mode with |
GB/T 28500-2012
ICS33.040.30
M12
National Standards of People's Republic of China
900/1800MHzTDMA digital
Cellular Mobile Communication Network
No.7ISUP signaling technical requirements
Issued on. 2012-10-01 2012-06-29 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 Abbreviations 1
General function of messages and signals 2 4
4.1 signaling message 2
4.2 signaling information 5
5 formats and coding 14
5.1 Overview 14
5.2 format and encoding parameters 18
5.3 ISUP parameters 18
5.4 ISUP message formats and coding 50
6 signaling procedures (basic call control) 57
6.1 Successful call set-up 57
6.2 Unsuccessful call set-up 62
6.3 Normal release procedures 62
6.4 pause, resume 63
Propagation delay determination procedure 63 6.5
6.6 Echo control program 64
6.7 Network performance 65
6.8 irregularities 66
6.9 ISDN User Part signaling congestion control 69
69 6.10 Automatic Congestion Control
6.11 ISDN User Part availability control 69
7 ISUP supplementary services supported 70
7.1 Overview 70
7.2 Calling Line Identification Presentation (CLIP, CalingLineIdentificationPresentation) 70
7.3 Calling Line Identification Restriction (CLIR, CalingLineIdentificationRestriction) 73
7.4 is supplied wiring identification (COLP, ConnectedLineIdentificationPresentation) 73
7.5 Connected Line Identification Restriction (COLR, ConnectedLineIdentificationRestriction) 73
7.6 Call Forwarding Unconditional (CFU, TheCalForwardingUnconditional) 74
7.7 Call Forwarding Busy (CFB, CalForwardingBusy) (including the busy user to determine and optimize routing in both cases) 75
Before 7.8 Call Forward No Answer (TheCalForwardingNoReply) 76
7.9 The user can not move and call forwarding (CalForwardingforMobilesubscriberUnreachable) 77
7.10 Call Waiting (CW, Cal Waiting) 78
7.11 Call Hold (HOLD, CalHold) 79
7.12 tripartite business (3PTY, ThreeParty) 80
8 signaling with 82
8.1 PLMN signaling complex processes within the network (MISUP-MTUP) 82
8.2 M-ISUP signaling complex process with PSTNISUP 88
8.3 M-ISUP signaling complex process with PSTNTUP 100
Echo time with 8.4 and PSTN network control program flow 113
Appendix A (normative appendix) ISUP protocol timer value 115
Appendix B (normative) in order to support business intelligence, increase in GSMISUP parameters 116
References 122
Foreword
This standard rule according to GB/T 1.1-2009 given draft.
The standard proposed by the Ministry of Industry and Information Technology of the People's Republic of China.
The standard by the China Communications Standards Association.
The standard was drafted. the Ministry of Industry and Information Technology and Telecommunications Research Institute.
The main drafters of this standard. Lu Jun, Wu Lizhen, Wang Liyan, Lee flowers, Wang Nina.
900/1800MHzTDMA digital
Cellular Mobile Communication Network
No.7ISUP signaling technical requirements
1 Scope
This standard specifies the protocol ISUP message parameters are applied in 900/1800MHzTDMA digital cellular mobile communications network when the
Format and encoding, ISUP call flow, ISUP supplementary service call process, as well as the same way with the other signaling signaling processes.
This standard applies to 900/1800MHzTDMA digital cellular mobile communication systems support No.7 common channel signaling system Fully
Services Digital Network User Part (ISUP) devices.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article
Member. For undated references, the latest edition (including any amendments) applies to this document.
GF001-9001 Chinese domestic telephone network No.7 signaling specifications
YDN038-1997 domestic No.7 signaling specification Integrated Services Digital Network User Part (ISUP)
YD/T910.3900/1800MHz TDMA digital cellular mobile communication network mobile services switching center and a base station subsystem indirect
Opening the second phase of the technical specifications
DSS1 business instruction code YD/T913 Digital Subscriber Signalling System No. 1 (DSS1) for ISDN telecommunications services
ITU-TQ.118 anomalies special release arrangements (Abnormalconditions-Specialreleasearrangements)
ITU-TQ.703 No.7 signaling system switching and signaling specification Message Transfer Part (MTP) signaling link (Switchingand
signalingspecificationsofsignalingsystemNo.7-Messagetransferpart (MTP) signalinglink)
ITU-TQ.704 No.7 signaling system switching and signaling specification Message Transfer Part signaling network functions and messages (Switching
andsignalingspecificationsofSignalingSystemNo.7-Messagetransferpart (MTP) Signalingnet-
workfunctionsandmessages)
ITU-TQ.730 ISDN User Part supplementary services (ISDNUserPartsupplementaryservices)
ITU-TQ.761 No.7 ISDN User Part signaling system functional description (SignalingSystemNo.7-ISDNUser
Partfunctionaldescription)
ITU-TQ.763 No.7 signaling system ISDN user part formats and encoding (SignalingSystem No.7-ISDN
UserPartformatsandcodes)
ITU-TQ.764 No.7 signaling system ISDN User Part signaling procedures (SignalingSystemNo.7-ISDNUser
Partsignalingprocedures)
ITU-TQ.850 No.1 Digital Subscriber Signalling System (DSS1) and Signalling System No.7 ISDN User Part (ISUP) the reason
And location of use (UsageofcauseandlocationintheDigitalSubscriberSignalingSystemNo.1andthe
SignalingSystemNo.7ISDNuserpart)
3 Abbreviations
CCSS CommonChannelSignalingSystem common channel signaling system
......
|