Powered by Google www.ChineseStandard.net Database: 189759 (21 Apr 2024)

GB/T 27728-2011 (GBT27728-2011)

GB/T 27728-2011_English: PDF (GBT 27728-2011, GBT27728-2011)
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 27728-2011English85 Add to Cart 0--9 seconds. Auto-delivery Wet wipes Valid GB/T 27728-2011

BASIC DATA
Standard ID GB/T 27728-2011 (GB/T27728-2011)
Description (Translated English) Wet wipes
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard Y39
Classification of International Standard 85.080
Word Count Estimation 18,147
Date of Issue 2011-12-30
Date of Implementation 2012-07-01
Older Standard (superseded by this standard) GB/T 20808-2006
Quoted Standard GB/T 1541-1989; GB/T 1545-2008; GB/T 2828.1; GB/T 4100-2006; GB/T 10739; GB/T 12914-2008; GB/T 15171; GB 15979; JJF 1070-2005
Drafting Organization China Pulp and Paper Research Institute
Administrative Organization National Standardization Technical Committee Paper Industry
Regulation (derived from) Announcement of Newly Approved National Standards No. 22 of 2011
Proposing organization China Light Industry Federation
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, China National Standardization Administration Committee
Summary This standard specifies the classification wipes, requirements, test methods, inspection rules, marking and packaging, transportation and storage. This standard applies to everyday life used by a non -woven fabric, wipes or other raw material to manufacture all kinds of wet wipes.

Standards related to: GB/T 27728-2011

GB/T 27728–2011
GB
ICS 85.080
Y 39
NATIONAL STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
Partly replacing GB/T 20808-2006
Wet wipes
湿巾
ISSUED ON. DECEMBER 30, 2011
IMPLEMENTED ON. JULY 01, 2012
Issued by. General Administration of Quality Supervision, Inspection
and Quarantine of the People’s Republic of China;
Standardization Administration Committee of the People’s
Republic of China.
Table of Contents
Foreword ... 3 
1  Scope ... 4 
2  Normative References ... 4 
3  Terms and Definitions ... 4 
4  Classifications Requirements ... 5 
5  Requirements ... 5 
6  Test Method ... 7 
7  Inspection Rule ... 9 
8  Marking and Packaging ... 10 
9  Transportation and Storage ... 11 
Annex A (Normative) Determination of Sealability of Packaging ... 12 
Annex B (Normative) Determination of Detergency ... 14 
Annex C (Normative) Determination of Causticity ... 19 
Annex D (Normative) Determination of Migratable Fluorescent Whitening Agent
... 23 
Foreword
This standard is drafted according to the provisions of GB/T 1.1-2009.
This standard partly replaces the wet wipes part in GB/T 20808–2006, “Facial tissue
(including wet wipes)”. Compared with GB/T 20808–2006, there are following main
changes in this standard.
- Content of facial tissue has been deleted;
- Terms and definitions, as well as classification have been added;
- Indexes of migratable fluorescent whitening agent, sealability of packaging, pH,
detergency, and causticity have been added;
- Provisions on packaged quantity has been adjusted;
- Containing-fluid-volume, horizontal tensile strength, dirt-degree, and other indexes
have been adjusted;
- The test method of containing-fluid-volume has been modified.
Please note that some content in this document may involve patents. The issuing
organization of this document assumes no responsibility of recognizing these patents.
This standard was proposed by China National Light Industry Association.
This standard shall be under the jurisdiction of National Technical Committee for
Standardization of Paper Industry (SAC/TC 141).
The responsible drafting organizations of this standard. China National Pulp and Paper
Research Institute, Guangzhou Procter & Gamble Co., Ltd., Tongling Jieya Biotechnology
Co., Ltd., Vinda International Holdings Limited, Unicharm Life Articles (China) Co., Ltd.,
Kimberly (China) Co., Ltd., Johnson & Johnson China Co., Ltd., Little Nurse (Tianjin)
Industrial Development Co., Ltd., Jinjiang Hengan Paper for Family Life Co., Ltd., and
Beijing Yifan Cleaning Article Co., Ltd.
The chief drafting staffs of this standard. Chenxi, Qiu Wenlun, Gaojun, Wangzhen, Zuo
Jianbo, Liping, Gao Fengjuan, and Li Difei.
This standard replaces the following historical editions.
- Partly replacing GB/T 20808-2006.
Wet wipes
1 Scope
This standard specifies classifications, requirements, test method, inspection rules,
marking, packaging, transportation, and storage of wet wipes.
This standard applies to various wet wipes which are made from non-woven, dust-free
paper, or other raw materials; and used in daily life.
2 Normative References
The articles contained in the following documents have become part of this standard when
they are quoted herein. For the dated documents so quoted, all the modifications
(Including all corrections) or revisions made thereafter shall be applicable to this standard.
GB/T 1541-1989 Paper and board - Determination of dirt
GB/T 1545-2008 Paper board and pulp - Determination of acidity or alkalinity
GB/T 2828.1 Sampling procedures for inspection by attributes - Part 1.
Sampling schemes indexed by acceptance quality limit (AQL) for
lot-by-lot inspection
GB/T 4100-2006 Ceramic tiles
GB/T 10739 Paper, board and pulps--standard atmosphere for conditioning and
testing
GB/T 12914-2008 Paper and board - Determination of tensile properties
GB/T 15171 Test method for leaks in sealed flexible packages
GB 15979 Hygienic standard for disposable sanitary products
JJF 1070-2005 Rules of Metrological Testing for Net Quantity of Products in
Prepackages with Fixed Content
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Wet wipes for kitchen
They refer to the wet wipes used to clean kitchen objects (e.g. gas stove, range hood,
etc.).
5.4 Wipes shall not have hair loss, crumbs phenomenon.
5.5 Toxic and harmful raw materials shall not be used in wet wipes. For wet wipes for
human body, only natural fiber shall be used as raw materials. Using any recycled fibrous
substance as the raw material is not allowed.
6 Test Method
6.1 Treatment of sample
It shall carry out the treatment of sample according to GB/T 10739.
6.2 Length and width deviations
6.2.1 Length deviation
Cut off the outer packing of wet wipes from one end and wipe off the outer packing. Take
out the wet wipes in the condition that they are not out of shape. Place them naturally and
flatwise on the glass pane. Measure the length of samples with a ruler. There shall be 6
pieces for each same-specification sample. And the accuracy shall reach 1mm. Calculate
the percentage of the difference of mean value and nominal value of the 6 samples with
the nominal value. That is the determined result of length deviation of the samples, with
accuracy to be 1%.
6.2.2 Width deviation
Cut off the outer packing of wet wipes from one end and wipe off the outer packing. Take
out the wet wipes in the condition that they are not out of shape. Place them naturally and
flatwise on the glass pane. Measure the width of samples with a ruler. There shall be 6
pieces for each same-specification sample. And the accuracy shall reach 1mm. Calculate
the percentage of the difference of mean value and nominal value of the 6 samples with
the nominal value. That is the determined result of width deviation of the samples, with
accuracy to be 1%.
6.2.3 Calculation of length and width deviations
Calculate the length and width deviations according to Formula (1).
Deviation = (mean value - nominal value) / nominal value x 100% ... (1)
6.3 Containing-fluid-volume
Separately and respectively take 1 piece of wet wipe from upper, middle and lower 3
positions of a complete package of wet wipes to constitute a sample (If the single
packaged quantity is less than 3 pieces, take the actual pieces of the single package as
the sample). After sampling, weigh the sample immediately with a balance with sensitivity
of 0.01g. Rinse the sample with distilled water or deionized water till there is no foam. Put
it into a drying oven of (85 ± 2)°C (when drying the sample, it shall not contact with four
8(16) 1 2 -- --
501~3200 8 8(16)
3201~35000 13 13(26)
7.4 Determination of acceptability. The sample quantity for the first test shall be equal to
the first sample quantity provided in the plan. If the number of unqualified products
discovered in the first sample is less than or equal to the first acceptable quantity, then this
batch shall be regarded as acceptable. If the number of unqualified products discovered in
the first sample is between the first acceptable quantity and the first unacceptable quantity,
then the second sample with the quantity provided in the plan shall be inspected; and it is
accumulated in the number of unqualified products discovered in the first and second
sample. If the accumulative number of unqualified products is less than or equal to the
second acceptable quantity, then this batch shall be determined as acceptable. If the
accumulative number of unqualified products is more than or equal to the second
acceptable quantity, then this batch shall be determined as unacceptable.
7.5 If the purchaser has dispute to the product quality, it shall inform the supplier for joint
re-inspection, within 3 months upon receiving the goods; or it entrusts an jointly-agreed
inspection body to carry out the re-inspection. If the re-inspection result does not comply
with this standard or provisions of contract, then this batch shall be determined as
unacceptable; and the supplier shall be responsible to handle; if the re-inspection result
complies with this standard or provisions of contract, then this batch shall be determined
as acceptable and the purchaser shall be responsible to handle.
8 Marking and Packaging
8.1 Packaging and marking of product distribution
Product marking shall include at least following contents.
- Product name and trade mark;
- Product standard serial number;
- Main components;
- Production date and shelf life, or production batch number and expirati...
...