Powered by Google www.ChineseStandard.net Database: 189759 (14 Jul 2024)

GB/T 19389-2016 English PDF

GB/T 19389-2016 (GB/T19389-2016, GBT 19389-2016, GBT19389-2016)
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 19389-2016English110 Add to Cart 0--9 seconds. Auto-delivery Test method of measuring rolling circumference for truck tyres Valid GB/T 19389-2016


BASIC DATA
Standard ID GB/T 19389-2016 (GB/T19389-2016)
Description (Translated English) Test method of measuring rolling circumference for truck tyres
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard G41
Classification of International Standard 83.160.10
Word Count Estimation 11,112
Date of Issue 14/6/2016
Date of Implementation 2017-05-01
Older Standard (superseded by this standard) GB/T 19389-2003
Quoted Standard GB/T 521; GB/T 6326
Adopted Standard ISO 9112-2008, MOD
Drafting Organization Ltd., Rubber Co., Ltd., Beijing Rubber Industry Research and Design Institute, Double Star Group Co., Ltd., round-round Jinyu Group Co., Ltd., Xiamen, China Rubber Tire Co., Ltd., Zhongtai Rubber Group Co., (China) Investment Co., Ltd., Continental Mark (China) Co., Ltd., the United States and China Rubber Co., Ltd., the United States and China Rubber Industry Co., Ltd., double money Group Co., Ltd., Guangzhou Fengli Rubber Tire Co., Ltd., Qingdao Senlin Kirin Tire Co.,
Administrative Organization National Tire Rim Standardization Technical Committee (SAC/TC 19)
Regulation (derived from) National Standard Announcement No. 8 of 2016
Proposing organization China Petroleum and Chemical Industry Federation
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People Republic of China, Standardization Administration of the People Republic of China
Summary This standard specifies two test methods for measuring the rolling perimeter and the number of revolutions per unit distance (km) under load conditions for truck tires. This standard applies to all new truck tires.

Standards related to: GB/T 19389-2016

GB/T 19389-2016
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 83.160.10
G 41
Replacing GB/T 19389-2003
Test Method of Measuring
Rolling Circumference for Truck Tyres
(ISO 9112.2008, Truck and Bus Tyres – Methods of
Measuring Tyre Rolling Circumference – Loaded New Tyres, MOD)
ISSUED ON. JUNE 14, 2016
IMPLEMENTED ON. MAY 1, 2017
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of PRC.
Table of Contents
Foreword ... 3
1 Scope ... 6
2 Normative References ... 6
3 Terms and Definitions ... 6
4 Rotary Drum Method ... 6
5 Vehicle Method ... 10
6 Test Report ... 14
Appendix A (Normative) Test Device Tolerance ... 15
Foreword
This Standard was drafted as per the rules specified in GB/T 1.1-2009.
This Standard replaced GB/T 19389-2003 Test Method of Measuring Rolling
Circumference for Truck Tyres; compared with GB/T 19389-2003, this Standard has
the major technical differences as follows
--- Add Terms and Definitions (see Clause 3 of this Edition);
--- Add Rotary Drum Method for Measuring the Rolling Circumference of Tyre (see
Clause 4 of this Edition);
--- Amend the “climate during the test” into “test temperature and wind speed” (see
Sub-clause 5.3 of this Edition; Sub-clause 5.2 of 2003 Edition);
--- Modify the classification criteria of test speed by vehicle method, and the test
speed value (see Sub-clause 5.4 of this Edition; Sub-clause 5.3 of 2003 Edition);
--- Increase the provision only two shafts exist on the tested vehicle of the vehicle
method (see Sub-clause 5.6.1 of this Edition; Sub-clause 6.1 of 2003 Edition);
--- Modify the ratio of the test load to the maximum load, and the definition of
maximum load of the specified tyres (see Sub-clause 5.6.2 of this Edition; Sub-
clause 6.2 of 2003 Edition);
--- Add the national standard for the method of measuring the outer diameter of
tyres in vehicle method (see Sub-clause 5.7.1 of this Edition; Sub-clause 7.1 of
2003 Edition);
--- Modify the test speed and running time of the tyre trial running in vehicle method
(see Sub-clause 5.7.4 of this Edition; Sub-clause 7.3 of 2003 Edition);
--- Modify the duration of tyre pre-heating test in vehicle method (see Sub-clause
5.8.3 of this Edition; Sub-clause 8.3 of 2003 Edition);
--- Modify the rolling circumference calculation rounding off in the vehicle method
from “closest integer” to “one digit after the decimal point” (see Sub-clause 5.9.1
of this Edition; Sub-clause 9.1 of 2003 Edition);
--- Modify the revolution per meter of tyre and the calculation formula in vehicle
method (see Sub-clause 5.9.2 of this Edition; Sub-clause 9.2 of 2003 Edition);
--- Modify the calculation formula for the rolling circumference of tyre in the vehicle
method (see Sub-clause 5.9.3 of this Edition; Sub-clause 9.3 of 2003 Edition);
--- Modify the “revolution of tyre per unit distance” into “revolution of tyre per
kilometer (including non-full-turn)” that shall be included in the test report [see
Item 6i) of this Edition; Item 6i) of 2003 Edition];
--- Increase the “tested tyre manufacturing number”, “rotary drum method. rotary
drum diameter, surface quality”, “tyre outer diameter on the test stage”, “rotary
drum revolution (including non-full-turn)”, “tyre revolution (including non-full-
turn)”, “laboratory name, test site name”, “testing staff” [see Item 6b), d), f), g), j),
k) of this Edition];
--- Modify the test device tolerance (see Appendix A of this Edition; Appendix A of
2003 Edition).
This Standard adopts re-drafting method to modify and use ISO 9112.2008 Truck and
Bus Tyres – Methods of Measuring Tyre Rolling Circumference – Loaded New Tyres.
Compared with ISO 9112.2008, this Standard has major technical differences and
causes as follows.
--- Modify the Normative References (see Clause 2 of this Edition);
--- In order to be more precise, add the requirements of “if the diameter tolerance of
rotary drum is ±1%, the tyre vertically presses on the driving rotary drum with
specified diameter” (see Sub-clause 4.2.1 of this Edition);
--- For the sake of safety and accuracy, add rotary drum method requirements of
“measuring position of test environment temperature” (see Sub-clause 4.3 of this
Edition);
--- Modify the test speed classification criteria of rotary drum method, more details
(see Sub-clause 4.4 of this Edition; Sub-clause 4.4 of ISO 9112.2008);
--- Increase the comparison of test results obtained by different rotary drum
diameters through empirical formula (2), so that improve the applicability of the
standard (see Sub-clause 4.9.2 of this Edition);
--- Increase the results obtained on the flat simulated road surface, which is
obtained through correcting the rolling circumference gotten by rotary drum
method through the empirical formula (3), so that improve the applicability of the
standard (see Sub-clause 4.9.3 of this Edition);
--- It is more accurate to modify the rolling circumference calculation value in the
vehicle method from “closest integer” into “one digit after the decimal point” (see
Sub-clause 5.9.1 of this Edition; Sub-clause 5.9.1 of ISO 9112.2008);
--- Increase the contents of the test report according to the due contents of test
report that shall be included in the country’s standard for conventional test
methods (see Clause 6 of this Standard).
Test Method of Measuring
Rolling Circumference for Truck Tyres
1 Scope
This Standard specifies, under the load condition of truck tyre, two test methods to
measure the rolling circumference and revolution per unit distance (kilometer).
This Standard is applicable to all new truck tyres.
2 Normative References
The following documents are essential to the application of this document. For the
dated documents, only the versions with the dates indicated are applicable to this
document; for the undated documents, only the latest version (including all the
amendments) are applicable to this document.
GB/T 521 Test Method of Measuring Peripheral Dimensions for Tyres
GB/T 6326 Tyre Terms and Definitions (GB/T 6326-2014, ISO 4223-1.2002, NEQ)
3 Terms and Definitions
The following terms and definitions and those ones stipulated in GB/T 6326 are
applicable to this document.
3.1 Reference speed (Vr)
The given test speed is relevant to the output rolling circumference value.
4 Rotary Drum Method
4.1 Principle
Install the tested tyre rim assembly onto a driven shaft, it vertically presses onto the
driving rotary drum with specified diameter, and exert load. The value of rolling
circumference shall be determined by the specific speed. Record the number of turns
for the tyre and rotary drum; introduce such data into the formula, and calculate the
rolling circumference of the tyre.
4.2 Requirements for test rotary drum
4.2.1 Diameter of rotary drum
The nominal diameter of test rotary drum is at least 1700mm, the diameter tolerance
of rotary drum is ±1%, the tyre vertically presses on the driving rotary drum with
specified diameter, and exert load. Pay attention to the smooth operation during the
measuring period.
4.2.2 Surface
The surface of rotary drum shall be smooth steel surface; if using a rotary drum with
textured surface, it shall be indicated in the test report. The surface of rotary drum shall
be kept clean.
4.2.3 Width
The width of rotary drum surface shall be greater than tread width of the tested tyre.
4.3 Thermal environment
The test shall be performed at a test ambient temperature of 25°C, or be performed in
an ambient temperature range of 20°C~30°C, the temperature requires no correction.
The distance between measuring position of test ambient temperature and the tyre
shall be in the range of 150mm~1000mm.
4.4 Test speed
4.4.1 Test speed of tyres with single-tire load index of 122 and above
In order to set a reference frame to the rolling circumference of all tyres, the test speed
is 80km/h for tyres with speed symbols of K and above; while the test speed is 60km/h
for tyres with speed symbols of J and below.
For radial tyres, the rolling circumference measurement can also be performed at a
test speed from 30km/h to 130km/h, the rolling circumference value can be calculated
by linear interpolation method.
4.4.2 Test speed of tyres with single-tire load index of 121 and below
In order to set a reference frame for the rolling circumference of all tyres, the test speed
is 80km/h.
For radial tyres, the rolling circumference measurement can also be performed at a
test speed from 30km/h to 130km/h, the rolling circumference value can be calculated
The ambient temperature shall be between 5°C and 30°C. If the road surface is paved
by asphalt, the road surface shall be cold enough not to be sticky. The Wind speed
shall not exceed 3m/s.
5.4 Test speed
5.4.1 Test speed of tyre with single-tire load index of 122 and above
For the tyre with speed symbols of K and above, the test speed shall be 80km/h±2km/h;
for the tyre with speed symbols of F~J, the test speed shall be 60km/h±2km/h.
5.4.2 Test speed of tyre with single-tire lo...
...